Automotive Service Equipment Commercial quality automotive wheel balancers and wheel balancing equipment from Ranger.
|
Don't pay outrageous prices for an inferior wheel balancer again!
Our quality wheel balancers from Ranger won't put a dent in your wallet.
You've gotta be kidding! -
That's all we can say after looking around to see what our competition charges for similar
products. We couldn't believe the high prices and inferior products.
You'll get only the best automotive shop products at AUTOMOTIVE SERVICE EQUIPMENT
- at absolutely great prices.
All we can do is give you the absolute finest wheel balancers out there at great prices! If you want a wheel balancer that won't break down a month after the warranty expires, you've come to the right place!
|
6 Second Cycle Time
Automatic Electronic Breaking
Self-Calibrating Function
Shaft Resistant Brake Pedal
Auto-Start Hood Function
Ounce/Gram Selection
Millimeter/Inches Selection
Bend-Pak / Ranger currently distributes to Russia, Ireland, Argentina, China, Malaysia,
Mexico, Australia, South Africa, and other major countries. Their broad range of
customers include General Motors, Texaco International, DHL International, Federal
Express and more.
Don't forget, Ranger's 1 year warranty and our own 30 day money-back guarantee apply.*
There's absolutely no risk to you. Ranger stands firmly behind their products.
Why should you buy a Ranger Wheel Balancer?
Quick Change Hub Nut
32 Bit Microprocessor Controls
Powder Coat Paint Finish
Forced Air-Cooled Motor
Split Weight Indicator
Durable 12 Gauge Steel Cabinet
Touch Pad Controls
Each machine is shipped with a user's manual designed to educate and inform all
users on proper operation, safety, and maintenance.
Features / Options
Dual Voltage Set-up
All Ranger wheel balancers feature a dual voltage, (110 or 220 VAC), dual phase, (50 or 60 cycles), power system for east
adaptation.
Simply position the switch located at the rear of the machine to the desired voltage, then install the proper plug.
Shaft Restraint Pedal
Both the R1000 and the R1500 wheel balancers feature a restraint pedal to hold the shaft in place.
This dramatically aids during the installation of weights or adapters.
State-of-the-Art Controls
Touch sensitive digital control takes the guesswork out of wheel parameter settings, weight placement and balancing
operations. A 32 bit microprocessor and state-of-the-art "single-board" electronics makes trouble shooting easy and
greatly improves dependability. Large, deep weight trays provide ample storage.
Distance Gauge
A built-in distance gauge takes the guesswork out of wheel parameter settings. The R1500 features automatic entry. Just
hold the scale in position for 3 seconds and the correct reading will register automatically. For the R1000, simply enter the
readings as shown on the scales.
Standard Accessories
Comes standard with a quick change mounting nut, and FOUR hardened steel cones, sizes 1.5" to 2.5", 1.5 to 3.19", 3.5" to
5" and 5 to 6". Other accessories include; weight hammer, pliers, wheel calipers, concrete mounting bolts and storage
pegs. An oversized, hardened alloy-steel main shaft means less fatigue, better accuracy and extreme durability. Ranger's
unique "Quick-Nut" adapter dramatically improves set up times. The truck cone kit, which includes the larger cone and
spacer plate for offset wheels is optional.
One Year Warranty
Warranted for one year to be free of defects in material and workmanship. Ranger will repair or replace at their option. See
warranty provided with balancer or contact us for full details.

Shown right - the oversized main shaft and
quick nut. --->
Standard on all Ranger wheel balancers.
DST2420 Wheel Balancer Suggested Retail Price - $2866 Our Regular Price - $1675 Our Sale Price - $1530 FREE SHIPPING
|
PRICE - $230 (when purchased with balancer)
FREE SHIPPING!
- And just try to find better prices!
SHOP AROUND. COMPARE OUR PRICES. - THEN COME ON BACK FOR THE BEST DEALS!
|
FREE SHIPPING & HANDLING!*
|
GUARANTEED LOWEST PRICES!
|
PLUS FREE SHIPPING & HANDLING!
|
Ranger Products, a division of Bend Pak Inc.
manufactures professional quality automotive repair
equipment. They have been manufacturing auto
shop equipment for over 45 years and are presently
one of the largest suppliers in the world.
WHEEL BALANCERS BY RANGER
|
BLOW-OUT WHEEL BALANCER SALE!
|
To download the video to your computer and watch later - Right-Click on link above and Left-Click on Save Target As...
|
Truck Cone and Spacer Plate Kit - RWS-1TC-1
Cone fits larger wheels with center holes from 4.5" to 6.5".
Spacer plate is included to offset larger wheels.
OPTIONAL EQUIPMENT / ACCESSORIES
|
Model RWL-350 Portable Pneumatic Wheel Lift
The RWL-350 Wheel Lift makes light work out of heavy lifting by servicing large, oversize truck
and custom wheels that usually require extra effort on part of the technician. The optional
RWL-350 pneumatic wheel lift helps technicians mount wheels effortlessly on most
balancers, preventing potential injuries and fatigue from manually lifting heavy wheels. The
lever-controlled wheel lift quickly raises the wheel and a bearing mounted slider positions
them for easy mounting. One handed operation means the technician's free hand remains
able to control the wheel assembly once it is lifted into the mounting position. The portable
wheel lift handles wheels up to 350 pounds and takes up minimal space around the balancer.
Regular Price - $620 Sale Price - $555 FREE SHIPPING!
|
Pneumatic operation 350-lb. working load capacity Heavy duty steel casters 14 gauge construction Weight 165 lbs.
|
Get the best for less at - Automotive Service Equipment www.asedeals.com Don't wait - we can't call you - Contact us now!
|
S&H FREE to a business address in the continental US (lower 48). Customer responsible for unloading from delivery truck on truck freight shipments. Add $40 if shipping to a residence (truck freight shipments only). CA & CT residents, add state sales tax. Please see our TERMS page for terms and conditions.
|
PRICE - $399 FREE SHIPPING!
|
5150560 Motorcycle Adapter for Ranger Wheel
Balancer
Fits Ranger wheel balancer DST2420. Allows user to balance
motorcycle wheels. Price is for when purchased with balancer.
The DST-2420 Digital Wheel Balancer - State of the Art Features
This is our most popular model for good reason. It's reliable, durable and accurate.


FEATURES:
• Dynamic, Static, Motorcycle‐ATV, and Performance Alloy settings.
• A multi‐user save function holds presets to increase productivity.
• An ergonomic control board and easy‐to‐read LED display has vibrant visual cues and keypad to improve efficiency and
proper balancing techniques for faster floor‐to‐floor times.
• A simultaneous retrieval of static, dynamic and ALU1\ALU2\ALU3 data, identifies weight placement configurations for a
variety of wheel styles and designs with the simple push of a button.
• Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors.
• Powerful 1.5 HP motor with Low RPM balancing speed and rapid six‐second cycle time.
• Automatic braking.
• Gram/ounce selection and millimeter/inch selection.
• Automatic round‐off with top‐dead‐center weight position indicator.
• Tiered weight placement indicators help identify out‐of‐sight position weight placement such as split‐weight or hidden
“behind‐the‐spoke” techniques.
• Manual or automatic start when hood is lowered.
• Self calibration function.
• High‐volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools.
• Precision‐machined, hardened‐steel 36‐mm shaft.
• Quick‐release hub nut for dramatically reduced set‐up times.
• Side‐position brake hold wheels at precisely 12‐o’clock for proper weight placement.
• Side cone storage pegs keeps accessories readily available.
• New “open‐side” hood design allows for a broader coverage of tire shapes and sizes.
FEATURES
Quick and Precise Set‐Up
Multi‐size center cones and a full rubber perimeter no‐mar “Quick‐Nut” bell adapter makes mounting wheels fast and
easy and minimizes the risk of costly wheel damage.
Mounting Cone Package
The DST2420 tooling package not only includes our standard car and light truck cones, but a light truck cone as well.
This well equipped package includes three automotive and light truck cones; 1.75” ‐ 2.75”, 2.75” ‐ 3.50”, and 3.50” ‐
4.25”, and one light truck cone 4.50” ‐ 5.00”.
Weight Optimization
The DST2420 automatically calculates the minimum amount of weight needed to achieve an optimal balance for the
tire and wheel configuration so you use less weight which adds up to real savings and increases your bottom line.
Wheel Graphic Interface
A touch‐pad display panel features tire and wheel assembly graphics to help simplify speed entry of wheel data and
helps guide technicians through balancing procedures. Operator function keys are labeled with simple, easy‐to‐read
icons helping operators identify and command all balancing functions.
LED Rolling Wheel Weight Displays
Bright LED weight placement indicators show weight positions as the wheel is gently rolled to exact top‐dead‐center.
Tiered weight placement indicators help identify out‐of‐sight weight placement such as split‐weight or hidden “behind‐
the‐spoke” techniques. Aids with clip‐on, and tape weight placement at precise locations for zero‐on balancing every
time.
VALUABLE TIME‐SAVING OPTIONS
No More Heavy Lifting
Our optional RWL‐350 wheel lift makes light work out of heavy lifting by servicing large, oversize truck and custom
wheels that usually require extra effort on part of the technician. The optional RWL‐350 pneumatic wheel lift helps
technicians mount wheels effortlessly on the balancer, preventing potential injuries and fatigue from manually lifting
heavy wheels. The lever‐controlled wheel lift quickly raises the wheel and a bearing mounted slider positions them for
easy mounting. One handed operation means the technician’s free hand remains able to control the wheel assembly
once it is lifted into the mounting position. The portable wheel lift handles wheels up to 350 pounds and takes up
minimal space around the balancer.
Motorcycle Capable
This optional Universal Wheel Clamp Kit comes with a shaft and adapters to accommodate Harley Davidson,
Japanese, and European Motorcycles with hub assemblies up to 9‐1/2" inches wide. It quickly installs on Ranger
DST2420 computer wheel balancers with a 36mm shaft. The adapter kit is designed to balance wheels with a center‐
hole diameter from 5/8" to 1‐1/4". Kit Includes: (1) Universal Wheel Clamp, (1) Shaft, (4) Centering Cones, (1) Short
Spacer, (1) Long Spacer, and (1) Spin‐On Nut.
Flange Plate Kit
Essential for the more precise balancing, this adjustable multi‐position flange plate kit includes centering pin
adapters to fit most import and domestic car and light truck lug‐bolt patterns. The specially designed lug‐bolt adaptors
balance wheels far more accurately than a cone can do by itself, resulting in a smooth, vibration free drive. Includes
flange plate kit and measuring caliper.
The Ranger DST2420 wheel balancer is a highly accurate and
dependable no‐frills balancer that features our proprietary Digital
Sensor Technology for critical reliability and repeatability. From
one‐bay shops to high‐volume tire stores, the DST2420 is built
with a gritty toughness that puts out perfectly balanced wheels
day after day, around the clock. Like all of our DST Series wheel
balancers, it’s a zero tolerance performer that features our
proven Direct‐Axis drive system, accurate to within hundredths of
an ounce ensuring wheels are balanced vibration‐free.
The DST2420 automatically calculates the exact weight needed to
achieve an optimal balance for almost every tire and wheel
configuration on the planet and brightly displayed LED’s mark the
exact amount and location in just six seconds. A full‐menu of time
saving features that includes Dynamic, Static, and Performance
Alloy settings allow you to balance OEM wheel configurations and
performance wheels with minimal effort and speed.
Digital Sensor Technology
Our highly accurate Digital Sensor Technology features a 16‐digit digital signal processor and single‐chip
technology that increases productivity and offers unprecedented speed and accuracy ‐ especially when using
sophisticated balance and weight placement techniques required for newer high‐tech OEM and aftermarket wheels.
Single‐chip circuit board architecture provides an inherent performance and reliability advantage compared to multi‐
chip implementations of the same functionality. In addition to overall latency reductions, the single‐chip architecture
significantly boosts device throughput. An extremely fast dedicated hyper transport protocol allows data to
communicate with the microprocessor at much faster speeds. This solution offers unmatched integration of
features and functionality and results in lower power consumption and dissipated heat.
Multi‐Directional Quartz Piezoelectric Load Sensors
The DST2420 uses highly precise dual‐component piezoelectric quartz load sensors combined with a single digital
rotation encoder that measure both longitudinal, transversal, and shear effects for multi‐directional force
unbalance detection. The piezoelectric force sensors used on the DST2420 are very sensitive and offer long‐term
stability and freedom from fatigue for a service life that is virtually unlimited. The high rigidity quartz crystal
sensors result in very high frequency detection in all three directions of measurement.

Click on image above to increase size
|
Click on specification chart above to increase size.
|
Standard Accessories
Standard cones , calipers, pliers and weight
hammer.
The DST2420 now also includes a larger
light truck cone.
Universal Lug Flange Plate Kit For Ranger Wheel Balancers $699 (Price when purchased with balancer)
|
PRICE - $245 (when purchased separately)
FREE SHIPPING!
PRICE - $230 (when purchased with balancer)
FREE SHIPPING!
Truck Cone and Spacer Plate Kit - RWS-1TC-1
Cone fits larger wheels with center holes from 4.5" to
6.5". Spacer plate is included to offset larger wheels.
PRICE - $245 (when purchased separately)
FREE SHIPPING!

The ZR650 wheel balancer features Dynamic, Static, and Performance Alloy
capability combined with a rapid six-second cycle time and automatic braking. The
ZR650 wheel balancing unit also features gram/ounce selection with automatic
round-off, millimeter/inch selection, top-dead-center weight position indicator, split
weight indicator for hiding weights, manual start with hood up, automatic start
when hood is lowered, six different balancing modes and a self calibration
program. A high-volume top weight tray with multiple storage areas gives you room
to inventory a wide variety of wheel weights, cones and tools. A swivel display
screen allows you to position the panel to a glare-free zone when excessive light
interferes with the ability to read the wheel balancer's screen. A precision-
machined, hardened-steel 36-mm shaft comes standard with a quick-release hub
nut to dramatically reduce set-up times and is equipped with side-positioning
pedal to hold wheels at precisely 12-o’clock for proper weight placement. A new
style “open-side” hood wheel balancer design allows for a broader coverage of tire
shapes and sizes.
Solve complex wheel vibration problems with Drive-Check™ technology
The Ranger ZR650 wheel balancer is more than just a wheel balancer – it’s a
highly precise vibration detection balancing solution that simulates driving speed
conditions and measures computer-generated imbalance of the tire and wheel
assembly automatically. It then recommends the most cost effective weight
optimization correction as needed which minimizes weight usage and maximizes
productivity. The ZR650 wheel balancer calculates the exact weight necessary to
achieve an optimal balance for almost every tire and wheel combination. A full-
menu of time saving features include dynamic, static, and multiple performance
alloy settings allowing you to balance OEM wheel configurations and performance
wheels with minimal effort and speed. Brightly displayed LED indicators mark the
exact amount and location in mere seconds. Like all Ranger wheel balancers, the
ZR650 wheel balancer is industrial grade built for perfectly balanced wheels day
after day, around the clock.
Drive-Check™ technology
The ZR650's Drive-Check technology dramatically improves rotational measuring
typically used to diagnose and repair ride disturbance complications. The highly
precise ZR650 wheel balancer performs a computer generated driving simulation
then checks and measures the tire/wheel assembly for imbalance and possible
runout of the rim and tire. With the ZR650 wheel balancer by Ranger Products,
virtually all possible complaints due to rotational imbalance are eliminated before
the wheel is mounted on the vehicle.
User Friendly Controls
A touch-pad display panel features tire and wheel assembly graphics to help
simplify speed entry of wheel data and helps guide technicians through balancing
procedures. Operator function keys are labeled with simple, easy-to-read icons
helping operators identify and command all balancing functions. Bright LED weight
placement indicators show weight positions as the wheel is gently rolled to exact
top-dead-center. Tiered weight placement indicators help identify out-of-sight
weight placement such as split-weight or hidden “behind-the-spoke” techniques.
Aids with clip-on, and tape weight placement at precise locations for zero-on
balancing every time.
NEW! - Ranger ZR-650 Direct Axis Wheel Balancer
The ZR650 wheel balancer uses Digital Sensor Technology and has n extremely
accurate sensor system that will increase productivity by reducing floor times
and minimizing come backs. Their proven Direct-Axis drive system is accurate
to within hundredths of an ounce ensures vibration free wheels.
Multi-directional anti-glare control panel
In order to minimize sunlight glare and increase user productivity the ZR650 wheel
balancer features a multi-directional control panel and anti-glare surface that
improves touch screen readability. Easy horizontal and vertical adjustment of the
control panel minimizes glare and reflections from overhead lights, windows, and
other light sources. In addition to multi-angle positioning, the ZR650 wheel
balancing control panel features a screen surface that causes light to diffuse and
reflect for better visibility.
Quick and Precise Set-Up
Multi-size center cones and a full rubber perimeter no-mar “Quick-Nut” bell
adapter makes mounting wheels fast and easy and minimizes the risk of costly
wheel damage.
Highly precise
The highly precise and accurate ZR650 wheel balancer features 64-bit
architecture and single‐chip technology for unprecedented speed and accuracy -
especially when using sophisticated balance and weight placement techniques
required for newer high-tech OEM and aftermarket wheels. Single-chip 64-bit
architecture provides improved stability and accuracy along with greater
application speed and data processing while using less hardware. By reducing
hardware, service and maintenance costs are reduced and equipment life cycle is
increased. An extremely fast dedicated hyper transport protocol allows data to
communicate with the micro-processor at much faster speeds resulting in lower
power consumption, reduced heat and increased stability and accuracy.
Multi-directional quartz piezoelectric load sensors
The ZR650 wheel balancer uses highly precise dual-component piezoelectric
quartz load sensors combined with a single digital rotation encoder that measure
both longitudinal, transversal, and shear effects for multi-directional force
unbalance detection. The piezoelectric force sensors used on the ZR650 wheel
balancers are very sensitive and offer long-term stability and freedom from fatigue
for a service life that is virtually unlimited. The high rigidity quartz crystal sensors
result in very high frequency detection in all three directions of measurement.
Mounting Cone Package
The ZR650 wheel balancer tooling package not only includes our standard car
and light truck cones, but a heavy-duty truck cone as well. This well equipped
package includes three automotive and light truck cones; 1.75” - 2.75”, 2.75” -
3.50”, and 3.50” - 4.25”, and one truck cone 4.50” - 5.00”.
Weight Optimization
The ZR650 wheel balancer automatically calculates the minimum amount of
weight needed to achieve an optimal balance for the tire and wheel configuration
so you use less weight which adds up to real savings and increases your bottom
line.

Click on image to increase size
|
1.5 HP motor can be changed from 110v to 220v easily with the flip of a switch
|
•Working temperature: -5C / 27F - 50C / 82F
•Drive system: Poly-V belt
•Cycle time: 6 - 9 seconds (avg.) depending on wheel
•Balancing modes: 1 dynamic / 2 static / 4 alloy
•Swivel display screen: standard
•Top positioning weight locator: standard
•Inside & outside measuring: standard
•Millimeter / inches selection: standard
•Ounce / gram selection: standard
•Wheel offset distance setting: manual
•Self-calibration function: standard
•Auto start when hood is lowered: standard
•Wheel spin braking: automatic / electronic
•Wheel holding: manual brake pedal standard
•Centering cones included: 3 standard / 1 truck
•Wheel calipers: standard
•Rear cone mount spring: standard
•No-mar rear cone mount pressure cup: standard
•Quick-release & mount hub nut: standard
•Maximum tire diameter: 50" / 1,270 mm
•Max tire weight: 150 pounds (68 kg)
•Max. wheel diameter: 30" / 762 mm
•Wheel width capacity: 2" - 20" / 51 mm - 508 mm
•Balancing increments: 0.25 or 0.01 oz
•Balancing speed: 180 rpm
•Accuracy: +/- .5 gram / .025 oz
•Resolution (round off mode): 5 gram / .25 oz.
•Shipping weight: 412 lbs. / 187 kg
•(1) Dynamic, (2) static (including motorcycle-ATV), and (4)
performance alloy settings are easily configured with simple
push of a button for a variety of wheel styles and designs
•An ergonomic control board and easy-to-read LED display has
vibrant visual cues and keypad to improve efficiency and proper
balancing techniques for faster floor-to-floor times
•Highly precise 64-bit architecture and single-chip technology
•Poly-V belt drive features a multi-v belt with longitudinal v-
shaped ribs that mate perfectly with the motor and spindle
sheave grooves fro continuous tension and distribution
•Gram / ounce selection and millimeter / inch selection
•Dual function weight position indicators provides either top-
dead-center or bottom-dead-center weight positions
•Automatic rolling wheel parameter setting feature saves
valuable time and minimizes errors
•Low RPM balancing speed and rapid six-second cycle time
•Automatic braking
•Tiered weight placement indicators help identify out-of-sight
position weight placement such as split-weight or hidden
"behind-the-spoke" techniques
•A multi-user save function holds presets to increase productivity
•Manual or automatic start when hood is lowered
•Self calibration function
•Dual-voltage equipped to work with both 110 / 220V, 50 / 60HZ,
single-phase
•High-volume top weight tray and side shelf storage gives you
room to inventory a wide variety of wheel weights and tools
•Precision-machined, hardened-steel 36-mm shaft.
•Quick-release hub nut for dramatically reduced set-up times
•Side-position brake hold wheels at precisely 12-o’clock for
proper weight placement.
•Side cone storage pegs keeps accessories readily available
•Open-side hood design allows for a broader coverage of tire
shapes and sizes
ZR-650 Wheel Balancer Suggested Retail Price - $3366 Our Regular Price - $1995 Our Sale Price - $1795 FREE SHIPPING
|
My new lift and Ranger wheel balancer are now in
service! Thanks for the great equipment and even
better service.
Gerald Stevenson
Stevenson's HyRail Services
Douglas, WY
Click on image to increase size
|
* - See our TERMS page for terms and conditions.
|
Automotive Service Equipment 379 Cardinal Circle Torrington, CT 06790 800-229-6218
|
Workhorse Deluxe Wheel Weight Kit
For wheel balancing
Has all of the most popular sizes bundled in one
affordable kit.
Price - $240 FREE SHIPPING!
|
Includes the Following:
Zinc Clip on Weight For Aluminum Rims -
.25 oz - 50 pc.
.50 oz - 50 pc.
.75 oz - 50 pc.
1 oz - 25 pc.
1.5 oz - 25 pc.
2 oz - 25 pc.
2.5 oz - 25 pc.
3 oz - 25 pc.
Zinc Clip on Weight for Steel Rims -
.25 oz - 50 pc.
.50 oz - 50 pc.
.75 oz - 50 pc.
1 oz - 25 pc.
1.5 oz - 25 pc.
2 oz - 25 pc.
2.5 oz - 25 pc.
3 oz - 25 pc.
Zinc Adhesive Weights -
.25 oz - 50 strips - 12 squares per strip