Automotive Service Equipment Solvent based parts washers, parts cleaners from R&D and Kleen-Tec
|

We have two different cold cleaning solvents available for use for our
solvent based parts washers. These are high end solvents that clean better than the
typical parts washing solvent, and also are safer for the user and for your parts and are more
environmentally friendly.
First, the general purpose cold cleaning solvent- HI-T DEGREASOL: a special formulation of petroleum
distillates, surfactants, cleaning and wetting agents that provides top performance. Needs no rinsing,
and leaves no residue. Conforms to California's Rule 66 for clean air. Safe for use on plastics, babbit,
solder and painted surfaces. Won't discolor, pit or corrode bronze, brass,aluminum or steel. Doesn't
break down when used with our dual filtration system., so is very economical.
Next, the nonhazardous cold cleaning solvent - DEGREASOL 99R: now you don't have to sacrifice cleaning
performance to avoid hazardous waste problems. With a high 141oF flashpoint it contains no ingredients
or characteristics listed as hazardous by the EPA's RCRA Act. DEGREASOL 99R is blended of
sulphur-free hydrocarbons, wetting agents, and detergents. Needs no rinsing and leaves no residue.
Conforms to California's Rule 66 also. Doesn't break down, so can be used indefinitely.
These R&D Parts cleaners are the standard by which all others are judged!
|
We looked around before deciding to carry these parts cleaners. They are the
absolute finest out there. Serious parts washers, at a reasonable price!
That's Automotive Service Equipment -
But don't take our word for it -
Don't forget - All parts washers come with 1 year warranty
and our exclusive 30 day money-back guarantee if not
completely satisfied.
Look, it's this simple. You just won't find a better quality parts washer at a lower price.
If you find one cheaper, that's exactly what it is - CHEAPER. You must compare features and quality when considering your purchase. When you do, you'll come to only one conclusion - Automotive Service Equipment
|
But to take advantage of these great deals you've got to contact us! We can't call you!
Sure, We could have gone with some cheaper, inferior part washer line out there.
But if it broke down 2 months after the warranty expired, you'd hold it against us forever.
We couldn't live with that!
Our goal is 100% customer satisfaction. And with our superior product line-up, we're
awfully close!
Prices:
Product
Degreasol Formula 99R-----
HI-T Degreasol--------------
Size
55 gal. drum
30 gal. drum
5 gal. pail
55 gal. drum
30 gal. drum
5 gal. pail
Price
$1158
$699
$153
$1119
$686
$149
7047 Replacement Filters Our Price - $22 FREE SHIPPING*
|
CLICK ABOVE TO VIEW YOUR CART AND COMPLETE YOUR ORDER OVER OUR SECURE SERVER
|
Sure, you may be able to find a cheaper parts washer out there, but you won't find any better. Get American-made quality at the best prices.
|
All R&D parts washers are Proudly made in the USA.
|
"I received my new parts washer after ordering on the web. It has
arrived in a timely manner and works perfectly. I'm thrilled at the
price too! I looked for other machines that do the same job and found
that in all cases they were more than twice the cost of yours. It's not
just the machine, it's the service too. I look forward to doing
business with you in the future and will recommend you to others as
well. I have you book marked."
- Norman Wallace
Lakewood Colorado
SOLVENT PARTS WASHERS / PARTS CLEANERS
|
Get the best for less at - asedeals.com Don't wait - we can't call you - Contact us now!
|
S&H FREE in the continental US (lower 48). Customer responsible for unloading from delivery truck on truck freight shipments. Add $40 if shipping to a residence (truck freight shipments only). CT residents, add state sales tax. Please see our TERMS page for terms and conditions.
|
We've got the parts cleaner for any size application.
Choose the parts cleaner that best fits your needs.
All parts washers come with fusible link that closes cover automatically in case of fire and have unobstructed
drain valve for easy clean-out. They also feature filtration and hermetically sealed, thermally protected 115v
AC motor. The reason you see cheaper parts cleaners out there is because of the shortcuts they take in these
areas. They may cost less up front, but you'll pay more in the long run.
Remember, always compare apples to apples.
You will not find a better quality parts washer at lower prices!
Why are R&D / Kleen Tec parts washers the absolute best parts cleaners you
can get for your money?
Filtration - Keeps the solution clean. Which of course means longer solution life, and the end
result is it saves you money! First, a barrier filter removes heavy sludge before the pump intake.
Then, you can add a cartridge filter. Try to find a parts washer that keeps the solution cleaner!
And the less frequently you need to change out your detergent, the more money you save both on
new detergent, and disposal fees.
Fire stop cover has fusible link that automatically closes in case of fire.
Rugged construction throughout. No flimsy gauge steel sheet metal here. We're talking 14 and 16
gauge reinforced throughout unit. Ensures your part washer will far outlast all those inferior
models out there.
Powder Coated Finish, not just painted. Will stand up where others will scratch and chip. Exposed
edges are rolled for safety and strength. Corners are welded and smooth finished.
Continuous circulation through stay-put hose with adjustable flow control.
Easy clean-out - New design provides unobstructed tank bottom and large drain with exterior valve.






These are truly top-of-the-line parts washers. Check them out -
Click on image to increase size
|
Click on image to increase size
|
R&D / Fountain Industries CleanMaster 440 Clean & Soak Parts Washer
|
All R&D parts Washers parts washers are Proudly made in the USA.
|
CleanMaster 440
45 Gallon Capacity
43"L x 23"W x 17"D Inside Tank
• Durable, baked on powder coated epoxy finish
• Adjustable work shelves lift up and out and place on
lower level, handy for deeper soaking
• Spring loaded door closure with 165˚F fusible link
• “Stay-Put” flexible metal hose directs and holds power
rinse where you want it
• Pistol-grip spray nozzle cleans and rinses parts easily.
Located in an out-of-the-way position for more working
area
• Filter screen filters out abrasive particles, protects
pump, keeps solvents clean for extended cleaning
power, lifts out for easy cleaning
• Parts basket
• 3/4” drain plug located on bottom front of the machine
for easy draining
• For use with petroleum solvents with a flash point
over 107˚F
• Not to be used with chlorinated solvents
• 300 lbs. Load Capacity
Specifications E440
Overall height
Lid open.............61”
Lid closed...........36”
Overall width (F to B).............24”
Overall length (L to R).............44”
Soaking depth......................9-1/2”
Working depth with shelf...........9”
Inside width (F to B)................23”
Inside length (L to R)...............43”
Voltage...........115VAC/60HZ/1PH
Amps......................................1A
Shipping weight.....................175 lbs.
Click on image above to increase size
|
Click on image above to increase size
|
Clean & Soak Parts Washer
CleanMaster 200 - 30 Gallon Capacity
35"L x 23.5"W x 16"D Inside Tank
Designed for use in small engine repair and machine shops,
service stations, industry, transmission and engine overhaul
shops, and agricultural markets.
• Durable, baked on powder coated epoxy finish
• Heavy-duty metal stand and shelf
• Spring loaded door closure with 165˚F fusible link
• Removable inside cabinet shelf
• “Stay-Put” flexible metal hose directs and holds
power rinse where you want it
• Screened sludge filter pad
• Built-in drain with plug
• Optional metal parts basket available - P# 50542-3 - $34
• For use with petroleum solvents with a flash point over
107˚F
• Not to be used with chlorinated solvents
• 200 lbs. Load Capacity
Specifications CleanMaster 200
Overall height
Lid open.............................60”
Lid closed.....................35-3/8”
Overall width (F to B)....24-1/2”
Overall length (L to R)....35-3/4”
Soaking depth.................8-1/2”
Working depth with shelf.......7”
Inside width (F to B).......23-1/2”
Inside length (L to R)............35”
Voltage........115VAC/60HZ/1PH
Amps..................................1A
Shipping weight.................131 lbs.
Click on image above to increase size Note - Pictures above show parts washers with optional drums sold separately.
|
CleanMaster 230 Drum Mounted Parts Washers - Built to last with years of reliable service
|
CleanMaster 230 Parts Washers
30 Gallon Capacity
32"L x 24"W x 7.5"D Inside Tank
• Durable, baked on powder coated epoxy finish
• Galvanized drawn steel sink
• Meets 0.75 freeboard requirements
• Heavy-duty industrial grade pump
• Spring loaded door closure with 165˚F fusible link
• “Stay-Put” flexible metal hose directs and holds
power rinse where you want it with flow-through brush
• Single on/off switch for pump and optional light kit
• For use with petroleum solvents with a flash point over
107˚F
• Not to be used with chlorinated solvents
Specifications E230*
Overall height................................63”
Overall width (F to B)................26-1/2”
Overall length (L to R)...............34-1/2”
Inside height..............................7-1/2”
Inside width (F to B)......................24”
Inside length (L to R).......... ..........32”
Voltage...............................115VAC/60HZ/1PH
Amps...........................................1A
Optional drum, part no................K7322
Shipping weight...........................68 lbs.
Note - Drums not included
Accessories
54527 - 10 Micron Filter System - $123
(When Purchased with Parts Washer)
K8146 - 10 Micron Filter Cartridge - $19
(When purchased with parts washer)
K7322 - 30 Gallon Drum - $139
(When purchased with parts washer)
Note - Drums do not include detergent
CleanMaster 230 - $668 FREE SHIPPING*
|
CleanMaster 200 - $999 FREE SHIPPING*
|
CleanMaster 440 - $1371 FREE SHIPPING*
|
Accessories
54527 - 10 Micron Filter System - $123
(When Purchased with Parts Washer)
K8146 - 10 Micron Filter Cartridge - $19
(When purchased with parts washer)
Accessories
54527 - 10 Micron Filter System - $123
(When Purchased with Parts Washer)
K8146 - 10 Micron Filter Cartridge - $19
(When purchased with parts washer)
7047 Replacement Filters Our Price - $22 FREE SHIPPING*
|
R&D Parts Washers Put your trust in the leader Over 500,000 units sold worldwide
|
R&D / Kleen Tec and Fountain Industries - Quality second to none! R&D Parts washers are a division of Fountain Industries. They are known as industrial and automotive leaders in the parts washing industry. Fountain Recently Merged with Kleen Tec. They have been manufacturing premium parts cleaning equipment for over 40 years. Headquartered in Minnesota, they are one of a dwindling number of manufactures who still proudly make their products in the USA. They've got a wide selection of solvent and water based parts cleaner at competitive prices for those shop owners who won't settle for anything less.
|
CleanMaster 1007 Parts Washer
Perfect size for smaller cleaning jobs that demand quality.
Stainless steel fused safety latch
» Full shelf to eliminate splashing
» UL and CSA approved 115V 60 Hz pump
» Four casters: two locking, two non-locking Cord wrap
» Adjustable height from 12 ¾” to 36 ¾”
» Locking pins at each height for safety
» Fluid capacity 5-Gallons
» Flo-Thru brush
» Stainless steel lid
Tank: 6 ¾” H x 14 ¾” W x 27” L
» Overall: 17” W x 30 ½” L
» Height down: 12 ¾”
» Height up: 36 ¾”
» Weight: 80lbs.
Click on image to increase size
|
Cleanmaster 1007 Parts Washer Price - $767 FREE SHIPPING*
|
Optional Adjustable Cart Price - $283 FREE SHIPPING*
|
* - See our TERMS page for terms and conditions.
|
Automotive Service Equipment 379 Cardinal Circle Torrington, CT 06790 800-229-6218
|