| 10,000 LB. SYMMETRIC CLEAR-FLOOR TWO POST LIFT - STANDARD WIDTH |
| MODEL XPR-10C |
| SPECIFICATIONS: |
| MODEL XPR-10C
Lifting Capacity* 10,000 Lbs. . *Max Capacity / Front Axle 5,000 Lbs. *Max Capacity / Rear Axle 5,000 Lbs. A - Height Overall: (*) 145" B - Width Overall (Outside of Base Plate): 132" C - Width (Outside of Columns): 124" D - Floor To Overhead Switch: (*) 141" E - Inside Columns: 102" F - Reach (Front Arm Min.): 25" G - Reach (Front Arm Max.): 46" H - Reach (Rear Arm Min.): 34" I - Reach (Rear Arm Max.): 55" J - Min. Pad Height: 4" K - Rise: 69" L - Max Lift Height (Pad Only): 73" M - Max Lift Height (6" Adapter): 79" N - Drive-Thru Clearance: 93" Motor (**) 220 VAC / 60 Hz. 1Ph. Time of full Rise: 45 Seconds Max Load Per Arm: 2,500 Lbs. * An optional bolt-on top extension for columns raises the overhead bar an additional 24". Must be ordered from factory at time of order. ** Special Voltages Available Upon Request. The design, material and specifications are subject to change without notice. |
| MINIMUM CONCRETE SPECIFICATIONS
Revised Date: 4/25/08 4-POST LIFTS DESCRIPTION MIN. CONCRETE SPECS HD-9ST-B 9,000 Capacity / Four Post Lift / Narrow Width 3-1/2 ” Min. Thickness / 2500 PSI HD-9-B 9,000 Capacity / Four Post Lift / Standard Width 3-1/2 ” Min. Thickness / 2500 PSI HD-9STX-B 9,000 Capacity / Four Post Lift / Narrow Width 3-1/2 ” Min. Thickness / 2500 PSI HD-9XW-B 9,000 Capacity / Four Post Lift / Standard Width 3-1/2 ” Min. Thickness / 2500 PSI HD-12SS 12,000 lb. Cap. / Space Saver 4 ” Min. Thickness / 2500 PSI HD-12 12,000 lb. Cap. / Extended 4 ” Min. Thickness / 2500 PSI HD-12X 12,000 lb. Cap. / Extended / Limo Style 4 ” Min. Thickness / 2500 PSI HD-14SS 14,000 Lb. Capacity / Space Saver 4 ” Min. Thickness / 2500 PSI HD-14 14,000 Lb. Capacity / Extended 4 ” Min. Thickness / 2500 PSI HD-14X 14,000 Lb. Capacity / Extended / Limo Style 4 ” Min. Thickness / 2500 PSI HD-14STL 14,000 Lb. Capacity Tall Lift / Space Saver / 82" Rise 4 ” Min. Thickness / 2500 PSI HD-14ETL 14,000 Lb. Capacity Tall Lift / Extended / 82" Rise 4 ” Min. Thickness / 2500 PSI HD-18 18,000 lb. Cap. / Standard 4 ” Min. Thickness / 2500 PSI HD-27 27,000 lb. Cap. / Standard 4 ” Min. Thickness / 2500 PSI HD-27X 27,000 lb. Cap. / Extended 4 ” Min. Thickness / 2500 PSI HD-35 35,000 lb. Cap. / Standard 5 ” Min. Thickness / 2500 PSI HD-35X 35,000 lb. Cap. / Extended 5 ” Min. Thickness / 2500 PSI HD-40 40,000 lb. Cap. / Standard 5 ” Min. Thickness / 2500 PSI HD-40X 40,000 lb. Cap. / Extended 5 ” Min. Thickness / 2500 PSI HD-12LS-B 12,000 lb. Cap. / Alignment 4 ” Min. Thickness / 2500 PSI HD-12LSX-B 12,000 lb. Cap. / Alignment / Extended 4 ” Min. Thickness / 2500 PSI HD-12LSXE-B 12,000 lb. Cap. / Alignment / Limo Extended 4 ” Min. Thickness / 2500 PSI HDO-12LS-B 12,000 lb. Cap. / Alignment / Open Front 5 ” Min. Thickness / 2500 PSI HDO-12LSX-B 12,000 lb. Cap. / Alignment / Extended / Open Front 4 ” Min. Thickness / 2500 PSI HD-14LS 14,000 Lb. Capacity / Alignment 4 ” Min. Thickness / 2500 PSI HD-14LSX 14,000 Lb. Capacity / Alignment / Extended 4 ” Min. Thickness / 2500 PSI HD-14LSXE 14,000 Lb. Capacity / Alignment / Limo Extended 4 ” Min. Thickness / 2500 PSI HDO-14LSX 14,000 Lb. Capacity / Alignment / Extended / Open Front 5 ” Min. Thickness / 2500 PSI HD-18A 18,000 lb. Cap. / Alignment 4 ” Min. Thickness / 2500 PSI HD-27A 27,000 lb. Cap. / Standard / Alignment 4 ” Min. Thickness / 2500 PSI HD-27XA 27,000 lb. Cap. / Extended / Alignment 4 ” Min. Thickness / 2500 PSI HD-35A 35,000 lb. Cap. / Alignment 5 ” Min. Thickness / 2500 PSI HD-35XA 35,000 lb. Cap. / Extended / Alignment 5 ” Min. Thickness / 2500 PSI XR-12AE 12,000 Lb. Capacity / Scissors Alignment 4 ” Min. Thickness / 2500 PSI STANDARD 2-POST LIFTSDESCRIPTION MIN. CONCRETE SPECS XP-9 9,000 lb. Cap. / Floorplate / Narrow 4 ” Min. Thickness / 3000 PSI XP-9X 9,000 lb. Cap. / Floorplate / Wide 4 ” Min. Thickness / 3000 PSI XP-10C 10,000 lb. Cap. / Clearfloor / Narrow 4 ” Min. Thickness / 3000 PSI XP-10CX 10,000 lb. Cap. / Clearfloor / Wide 4 ” Min. Thickness / 3000 PSI XP-10AC 10,000 lb. Cap. / Asymmetric Clearfloor / Narrow 4 ” Min. Thickness / 3000 PSI XP-10ACX 10,000 lb. Cap. / Asymmetric Clearfloor / Wide 4 ” Min. Thickness / 3000 PSI XP-12CTA 12,000 lb. Cap. / Clearfloor / Triple Telescoping Arms 6 ” Min. Thickness / 3000 PSI XP-15C 15,000 lb. Cap. / Clearfloor 6 ” Min. Thickness / 3000 PSI XP-18C 18,000 lb. Cap. / Clearfloor 8 ” Min. Thickness / 3000 PSI XP-12FTA 12,000 lb. Cap. / Floorplate / Triple Telescoping Arms 6 ” Min. Thickness / 3000 PSI XPR-9F 9,000 Lb. Capacity / Floorplate / Chain-Over / Narrow 4 ” Min. Thickness / 3000 PSI XPR-9FX 9,000 Lb. Capacity / Floorplate / Chain-Over / Wide 4 ” Min. Thickness / 3000 PSI XPR-9FD 9,000 Lb. Capacity / Floorplate / Direct-Drive / Narrow 4 ” Min. Thickness / 3000 PSI XPR-9FDX 9,000 Lb. Capacity / Floorplate / Direct-Drive / Wide 4 ” Min. Thickness / 3000 PSI XPR-12FD 12,000 Lb. Capacity / Floorplate / Direct-Drive 6 ” Min. Thickness / 3000 PSI XPR-10C 10,000 Lb. Capacity / Clearfloor / Narrow 4 ” Min. Thickness / 3000 PSI XPR-10CX 10,000 Lb. Capacity / Clearfloor / Wide 4 ” Min. Thickness / 3000 PSI XPR-10AC 10,000 Lb. Capacity / Asymmetric Clearfloor / Narrow 4 ” Min. Thickness / 3000 PSI XPR-10ACX 10,000 Lb. Capacity / Asymmetric Clearfloor / Wide 4 ” Min. Thickness / 3000 PSI XPR-12C 12,000 Lb. Capacity / Clearfloor / Triple-Telescope Arms 6 ” Min. Thickness / 3000 PSI XPR-15C 15,000 Lb. Capacity / Clearfloor / Standard Arms 6 ” Min. Thickness / 3000 PSI XPR-18C 18,000 Lb. Capacity / Clearfloor / Standard Arms 8 ” Min. Thickness / 3000 PSI SCISSOR LIFTS DESCRIPTION MIN. CONCRETE SPECS XR-12AE 12,000 lb. Cap. / Scissors / Alignment / Extended 4 ” Min. Thickness / 2500 PSI SP-45R 4,500 lb. Cap. / Scissors / Full-Rise Runway Style 4 ” Min. Thickness / 2500 PSI SP-7X 7,000 lb. Cap. / Scissors / Full-Rise Platform Style 4 ” Min. Thickness / 2500 PSI SPECIALTY LIFTS DESCRIPTION MIN. CONCRETE SPECS PL-6SP 6,000 lb. Capacity Single Post Parking Lift / Deck 4 ” Min. Thickness / 3000 PSI PL-6SPX 6,000 lb. Capacity Single Post Parking Lift / Deck / Extended Rise 4 ” Min. Thickness / 3000 PSI PL-7 7,000 lb. Capacity / Two-Post Parking Lift / Deck / Standard Rise 4 ” Min. Thickness / 3000 PSI PL-7X 7,000 lb. Capacity / Two-Post Parking Lift / Deck / Extended Rise 4 ” Min. Thickness / 3000 PSI LR-60 6,000 lb. Cap. / Low-Rise Lift 3-1/2 ” Min. Thickness / 2500 PSI LR-60P 6,000 lb. Cap. / Low-Rise Lift / Portable 3-1/2 ” Min. Thickness / 2500 PSI MD-6XP 6,000 lb. Cap. / Mid-Rise / Frame Lift / Portable 3-1/2 ” Min. Thickness / 2500 PSI P-6 6,000 lb. Cap. / Low-Rise Lift / Pit-Style 3-1/2 ” Min. Thickness / 2500 PSI P-6F 6,000 lb. Cap. / Low-Rise Lift / Pit-Style / Flush Mount 3-1/2 ” Min. Thickness / 2500 PSI Lift owners and end users are responsible for the safe installation of their lift. The figures above represent suggested concrete specifications but should not be construed as actual requirements for your building, facility or application. Because local and statewide building codes may change and/or vary, always check with the building architect before installation for additional guidance on UBC compliance requirements. In no event shall BendPak Inc. be liable for special, consequential or incidental damages for the misinterpretation of this information. BendPak Inc. reserves the right to make changes to this document without incurring any obligation to notify the public that changes were made. Specifications of concrete must be adhered to. Failure to do so could cause lift failure resulting in personal injury or death. A level floor is suggested for proper installation and level lifting. Small differences in floor slopes may be compensated for by proper shimming. If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab. DO NOT install lift on any asphalt surface or any surface other than concrete. DO NOT install lift on expansion seams or on cracked or defective concrete. DO NOT install lift on a second / elevated floor without first consulting building architect. DO NOT install lift without first consulting building architect. |
 |