Free Shipping On All Orders
Automotive Service Equipment .com - alignment rack, alignment lifts
BLOW-OUT SALE!
on select Alignment lifts!
Four Post Alignment Lifts, Alignment Racks
alignment lift, alignment lifts
home about us products contact us check out search
Automotive Service Equipment .com
Heavy duty four post alignment lifts, alignment racks from Bend-Pak
Pricing & Specifications
GUARANTEED LOWEST PRICES -
AND FREE SHIPPING!*
Alignment rack, alignment racks
Warning! -

Don't take a chance on one of those no-name, bargain-basment alignment lifts that are out there. And you sure don't want to take a chance by purchasing from some manufacturer out there that's only been around for a year or two!
What happens if they go out of business and you need a part?

Invest in a lift manufactured by
Bend-Pak, one of the leading names in automotive lifts. A company that has been manufacturing automotive products for 40 years.

Buy with confidence that you're getting a quality product.
When it comes to automobile lifts, safety is too important to trust in an inferior, economy alignment lift. - Especially when you're the one standing under it!
4 post alignment lifts, 4 post alignment lift
Shown with optional rolling jacks
Bend-Pak alignment lifts turn ordinary alignment bays into full-service Supercenters!  From four wheel alignments to brake repair and under-car service, you will work faster and more efficiently than ever before.  Each model is equipped with full-floating turnplates, integrated rear slip-plates, automatic leveling, simple push-button controls and safety features throughout.
alignment racks, alignment rack
Bend-Pak is one of America's largest and most trusted car lift and truck lift manufacturers.
Don't settle for a bargain lift.
PLUS - FREE SHIPPING & HANDLING**
See Prices Below
If you're looking for an above ground, heavy duty four post alignment rack,
- well look no further.
Not only will you find the finest quality 4 post alignment racks here at ASE, but you'll get our low price guarantee*.
Why should you buy a Bend-Pak Alignment Lift?
automobile lift, auto lift
Safety is a priority - Dual function lock system features a slack safety device. In any slack cable condition this additional safety engages in just a fraction of a second. Adjustable safety lock ladders ensure the runways are level when resting in any of the lock positions. Bend-Pak doesn't just pay lip service to safety!

Selection - Wide variety of designs are available

5 Year Limited Warranty - Bend Pak guarantees your safety and satisfaction by offering a warranty few others will meet. Service is maintained through a worldwide network of authorized service centers.

Superior Lifting System - High tensile strength cable drive system. Oversized Cables are a heavy duty 1/2" on 12,000 lb. models.

Durable Finish - High Gloss industrial epoxy specially formulated for offshore oil platforms to resist corrosion and offers the ultimate protection from the environment
.

Ultimate Safety - Multi-Position pnuematic locks in all four columns, as well as "deadman" style controls for precise lowering.

Adjustable runways - Accomodate a variety of tire widths.

Surface Mounted Design - Avoids environmental issues.

Easy Installation - No excavation required. All necessary hardware is included.

Integrated Hydraulic back-up system - for added safety.

Electric/Hydraulic Power Unit - incorporates a fully regulated pressure relief system.

Easy Installation - delivered with all necessary hardware.

All Alignment models come standard with rail kits to accommodate rolling drain-pans or bridge/jacks

As with all hydraulic lifts, customer is responsible for hydraulic fluid, removal from truck, installation and electrical hook-up.

Cylinder is located under runway. This eliminates any opportunity for vehicle door or mirror damage.

Rollers on the ends of approach ramps helps minimize floor damage.

Automatic ramp chocks engage when the lift is raised.

Inspection ports in columns allow for viewing of cables.

Bend-Pak HD alignment Lifts areALI and ETL approved.

Top Quality - Only the finest quality components go into each Bend-pak alignment lift. Starting at the beginning with high quality ASTM steel and ending with superior welds, bringing you a truly unequalled product
alignment lift
car lifts, automotive lift
heavy duty auto lift
above ground lifts, alignment rack
automotive lifts, automotive lift
car lifts, automotive lift
car lifts, automotive lift
above ground lifts, two post lifts
above ground lifts, two post lifts
above ground lifts, two post lifts
alignment racks
alignment rack
alignment lifts
alignment lift
alignment lift
alignment racks
alignment lift
alignment lift
heavy duty auto lift
Alignment Lift Sale!
See models and prices below
Are you comfortable buying a lift from a manufacturer you never heard of before? If you're like us, the answer is a loud "NO!"
You can buy with confidence when you buy a Bend-Pak lift - America's favorite.

You simply
will not find a higher quality alignment lift at a lower price
   -
PERIOD.
Bend-Pak manufactures some of the finest lifts in the world and is one of the largest names in the industry. You don't get that big by making an inferior product. Their manufacturing process is painstaking in it's quality control and state-of-the-art in design and construction.
Bend-Pak won't cut corners just to make a cheaper alignment lift.
Blow-out alignment lift sale! Prices have never been lower.
CALL FOR OUR MOST CURRENT SALE PRICES.
Standard Alignment Lift Models
alignment lifts, alignment lift
ALI & ETL Certified
Models HD12LS, HD12LSX and HD12LSXE
ALI Certified
Three different ramp lengths to choose
12,000 pound lifting capacity
Heavy-duty turn plates included
Multi-position turn plate pockets
Integrated rear slip-plates
Runways include rail-kit for optional accessories
Electric/hydraulic power system
Automatic leveling system
Single hydraulic cylinder mounted underneath runway
Internal Anti-Sway slider blocks in each column
Features heavy-duty 1/2" aircraft cable
Oversized self-lubricating cable rollers
Dual Function Lock System features a slack safety device. Safety engages in a fraction of a second.
Rugged 1-3/8" roller axles
Multi-position safety locks in each column
Ramps feature non-skid surface - safer for vehicle - and technician!
Push-button safety release
Runways adjust for different tread widths
Rollers on the ends of the approach ramp minimizes floor damage.
Automatic ramp chocks engage when lift is raised
Optional drive-thru ramps available
Optional 6000 pound capacity rolling jacks available
These integrated rear slip plates are necessary for today's high-tech four wheel alignment. Bend-Pak's exclusive design uses elevated fixed casters instead of ball bearings to provide smooth, trouble free performance even under the most harsh conditions.
alignment lifts Two heavy duty, full floating turnplates in addition to multiple "pockets". These additional pockets allow you to position the turnplates further back, away from the front columns an standard length vehicles.
alignment lift
Model HD-12LS-B
Style - Short Alignment rack
Lifting capacity 12,000 lbs.
Lifting Height 78"
Lifting Time 60 Seconds
Overall Length 211"
Overall Width of Columns 130"
Overall Height of Columns 82"
Minimum Runway Height 8-3/4"
Runway Width 20"
Width Between Posts 116"
Four Wheel Alignment 82"-135"
Max Two Wheel Alignment 151"
Max. wheelbase 168"
Motor 220 VAC / 60 Hz 1 Ph.
Suggested Retail Price - $10,672
Our Price - $4720
FREE SHIPPING*
Model HD-12LSX-B
Style - Standard Alignment lifts
Lifting capacity 12,000 lbs.
Lifting Height 78"
Lifting Time 60 Seconds
Overall Length 235"
Overall Width of Columns 130"
Overall Height of Columns 82"
Minimum Runway Height 8-3/4"
Runway Width 20"
Width Between Posts 116"
Four Wheel Alignment 82"-135"
Max Two Wheel Alignment 175"
Maximum Wheelbase 192"
Motor 220 VAC / 60 Hz. 1Ph.
Suggested Retail Price - $11,658
Our Regular Price - $5060
FREE SHIPPING*
Model HD-12LSXE-B
Style - Extra Long Alignment racks
Lifting capacity 12,000 lbs.
Lifting Height 78"
Lifting Time 60 Seconds
Overall Length 284"
Overall Width of Columns 130"
Overall Height of Columns 82"
Minimum Runway Height 8-3/4"
Runway Width 20"
Width Between Posts 116"
Four Wheel Alignment 82"-135"
Max Two Wheel Alignment 224"
Maximum Wheelbase 238"
Motor (*) 220 VAC / 60 Hz. 1Ph.
Suggested Retail Price - $13,530
Our Regular Price - $6220
Our Sale Price - $5920
FREE SHIPPING*
VIEW FLOORPLAN FOR HD-12LS, HD-12LSX, & HD-12LSXE
WARNING! - There's a distributor out there that carries these alignment lifts at a lower price. - Until you factor in their inflated shipping charge. Another thing to beware of is the glut of lift distributors and manufacturers with "America" in their name. Some do this in hopes that you will assume the lift is made in the USA when it may not be. Just ask them where their lifts are made. Some also try the old bait and switch trick. They advertise a foreign bargain lift next to their more expensive ALI approved, USA made lifts hoping that you don't notice the difference.
Don't be fooled by these tactics. We will never try to deceive you like this.
HD-18A Heavy Truck Alignment Lift
18,000 pound lifting capacity 
Heavy-duty turn plates included
Integrated rear slip-plates
Automatic leveling system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Runways include rail-kit for optional accessories
Adjustable runways
Multi-position turn plate pockets
Lifting Height 72"
Lifting Time 120 Seconds
Overall Length 227"
Overall Width 144"
Runway Width 18"
Width Between Posts 125"
Four Wheel Alignment 82"-140"
Max Two Wheel Alignment 145"
Maximum General Wheelbase 160"
Motor (*) 220 VAC / 60 Hz. 1Ph.
alignment rack
Shown with optional rolling jacks
Manufacturer's suggested retail price - $12,626
Our Regular Price - $9710
FREE SHIPPING*
VIEW FLOORPLAN HD-18A
Alignment Lift Sale!
HD-27A Heavy Truck Alignment Lift
heavy duty truck hoist
27,000 pound lifting capacity
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Style Standard
Lifting Capacity 27,000 lbs. / 12258 Kg.
Lifting height 72" / 1829mm
Lifting time 75 Seconds
Overall length 287" / 7290mm
Overall width 144" / 3658mm
Runway Width 18" / 457mm
Width between posts 125" / 3173mm
General wheelbase 243" / 6274mm
Motor (*) 220 VAC / 60Hz. 1Ph
Alignment models available
Manufacturer's suggested price - $11,794
HD27A
Our Price - $11070
FREE SHIPPING*
HD-27XA - Extended Length Model
Truck Alignment Hoist
Overall Length (incl. ramps) - 347"
Wheelbase capacity - 303"

Our Price - $12955
FREE SHIPPING*
VIEW FLOORPLAN HD-27A and HD-27XA
VIEW MORE PICTURES OF HEAVY TRUCK LIFTS
HD-35A Heavy Truck Alignment Hoist
35,000 pound lifting capacity
Electric/hydraulic power system
Heavy-duty chain lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" ramp extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Automatic leveling system
Style Standard
Lifting Capacity 35,000lbs.15876 Kg.
Lifting height 72" 1829mm
Lifting time 75 Seconds
Overall length 287" 7290mm
Overall width 144" 3658mm
Runway width 24" 610mm
Width between posts 125" 3173mm
General wheelbase 243" 6274mm
Motor (*) 220 VAC 60Hz. 1q
Alignment models available
heavy truck lifts
Manufacturer's suggested price - $26,822
HD35A
Our Price - $17,315
FREE SHIPPING*
HD-35XA - Extended Length Model Heavy TruckAlignment Lift
Overall Length (incl. ramps) - 347"
Wheelbase capacity - 303"
Our Regular Price - $20,740
Our Sale Price - $20,340
FREE SHIPPING*
VIEW FLOORPLAN HD-35A and HD-35XA
VIEW MORE PICTURES OF HEAVY TRUCK LIFTS
OPTIONS / ACCESSORIES -
Optional Model RJ-6 Rolling Jacks
6000 lb. capacity rolling bridge jacks offer the ultimate in jacking speed and convenience. Their exclusive telescoping roller design allows the runways to be adjusted for different tread widths and precision rollers enable you to position them anywhere under the vehicle. Perfect for wheel and suspension work.Each jack comes complete with stackable pad adapters and axle support plates.
rolling bridge jacks
VIEW FLOORPLAN RJ-6
RJ-6 (6,000 lb. capacity rolling bridge)

RJ-9 (9,000 lb. capacity rolling bridge)

RJ-12 (12,000 lb. capacity rolling bridge)

RJ-15 (15,000 lb. capacity rolling bridge)

RJ-18 (18,000 lb. capacity rolling bridge)

RJ-25 (25,000 lb. capacity rolling bridge)
$1225

$1560

$2270

$2450

$3320

$3550
VIEW FLOORPLAN RJ-9
VIEW FLOORPLAN RJ-12
VIEW FLOORPLAN RJ-15
VIEW FLOORPLAN RJ-18
VIEW FLOORPLAN RJ-25
Rolling Jack Plate
JP-6 Rolling Jack Plate -
An economical alternative to the Rolling Bridge Jack. Use in conjunction with a bottle jack to jack up vehicle for access to the wheels for brake work, etc... Telescoping, to adjust with your runways.
Capacity = 6,000 lbs.
Our Regular Price - $320
FREE SHIPPING*
DP30 Rolling Oil Drain
This convenient rolling oil drain can easily be added to your lift for quick and easy oil or fluid draining. 15 gallon capacity
Our Price - $320
FREE SHIPPING*
rolling oil drain
four post lifts, four post lift
Air / Electric Work Station
Includes filter / lubricator / regulator that mounts directly and easily on any column. Air and electrical outlets provides remote access close to where you need it.
Price - $205
FREE SHIPPING*
AK12 Airline Kit
Have air line integrated into your lift.
Aids in hooking up rolling jacks.
Price - $225
add Air Line Kit to shopping cart
30" Runway Extensions available for Models BP18 and BP27
Add some length to your runways to accomodate a longer wheelbase, without having to pay for a larger lift! Sold in pairs -
HD18 extensions - $1020
HD27 extensions -
$1020
HD
35 extensions - $1130
FREE SHIPPING*
Air Hose Reels
CLICK HERE TO SEE OUR AIR HOSE AND AIR HOSE REELS
Guaranteed lowest prices* -
If you find these 4 post alignment lifts advertised anywhere on the web for less,
just tell us where you saw them, and we'll beat them.
Our prices
will not be beaten!
Click Here to view this lift at Jay Leno's Garage .com
Click on the link above to view BendPak lifts at JayLenosGarage.com
CLICK HERE TO SEE MORE AUTOMOTIVE LIFTS.
CLICK HERE TO SEE OUR OPEN FRONT FOUR POST ALIGNMENT LIFTS.
CLICK HERE TO VIEW OUR SCISSOR ALIGNMENT RACK
Ultimate Safety

Fully Regulated Pressure System

Maintenance Free Power System

Automatic Safety Locks

5 Year Limited Warranty

Extended Length Models
garage lift, above ground lifts
four post lift
four post lifts
hydraulic lifts
four-post lifts
4 post lifts, garage lifts
All 4 post lifts have 220VAC
60Hz single ph. Motor
Of course, Bend-Pak's limited 5 year warranty applies to all purchases! Call for details.

Bend Pak  stands behind every product they make.

Remember when considering purchasing that inferior 4 post lift - you
must compare apples to apples.

You simply
won't find a better product at a lower price - period.
S&H FREE to a business address in the continental US (lower 48).
Customer responsible for unloading from delivery truck on truck freight shipments..
CT residents, add state sales tax.
Please see our TERMS page for terms and conditions.
free wheel lift freewheel lift free wheel lifts automotive equipment
Get the best for less at - 
Automotive Service Equipment .com 
Don't wait - we can't call you - Contact us now!
automotive equipment
To start saving money
and increase your
shop's profits -
CONTACT US NOW!
Automotive Service Equipment .com
Get the best - for less!
CLICK HERE TO PLACE ORDER, TO REQUEST A CATALOG OR MORE INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL:  contact@asedeals.com
Automotive Service Equipment .com - discount automotive repair shop equipment and auto shop tools
" EXCLUSIVE: ONLY FOR THOSE WHO WANT TO SAVE SOME SERIOU$ MONEY! " -
CLICK HERE TO RECEIVE MONTHLY EMAILS OF OUR SPECIAL DEALS!
or just give us your feedback


Our monthly special deals are available exclusively to subscribers! Don't miss out - sign up now!
Your email address will be kept confidential and you won't recieve mass emailings from us.
NEED FINANCING? - CLICK HERE
HOME      /     PRODUCTS     /     ABOUT US     /     CONTACT US     /     LINKS      /     TERMS
ORDER STATUS    /     ORDER FORM     /     FINANCING     /     SITE SEARCH     /     REQUEST CATALOG

AUTOMOTIVE LIFTS / TRUCK LIFTS     /     AIR COMPRESSORS     /     JACKS
BATTERY CHARGERS / JUMP STARTERS     /     PARTS WASHERS     /     WELDERS / PLASMA CUTTERS
WHEEL SERVICE     /     TOOL BOXES     /     TUBE BENDERS     /     SHOP EQUIPMENT
* - See our TERMS page for terms and conditions.