Firepower / Thermal Dynamics Plasma Cutting Systems
These are more than mere plasma cutters, they are packed with features and quality that you simply will not find anywhere else.
Inverter Technology that gives superior cutting performance and increases cutting cycle
Portable, and relatively lightweight compared to other cutters of similar amperage.
Pilot arc / drag torch system allows you to cut rusted, painted or coated surfaces without prior surface preparation.
Can cut grates, chain link fence and perforated steel without restarting the torch.
Built solid, with rugged roll bar design to protect unit.
Auto pilot restart, which will speed up your cutting time significantly.
The new 1Torch unique design has many features such as a reduced heat affected zone for quicker fit up and better quality cuts with much less distortion.
for the Sheet Metal Cutting World
With a self-contained air compressor, this unit has everything you need to get up and running, right out of the box.
The FP18 portable plasma cutting system operates on standard 115 volt household current. No need to buy an expensive air compressor. The built-in compressor on the FP18 provides the user maximum portability. The FP18 features Firepower's pilot arc/drag torch system which allows you to cut rusted, painted, or coated surfaces, without the need for prior surface preparation and it lets you cut grates, chain link fence and perforated steel without restarting the torch. The FP18 portable self-contained plasma system is an ideal system for HVAC, auto body, metal roofing, metal building construction as well as many other uses around the farm, ranch, and light maintenance shop.
FEATURES:
Operates on standard 115 volt household current
Built-in air compressor
Maximum portability
Cuts mild steel, stainless steel, aluminum, copper, and brass
Firepower drag tip torch system
Long consumables life / low cost per cut
Firepower pilot arc system
Firepower automatic torch restart system
COMES COMPLETE WITH:
20 ft. genuine Firepower drag torch system
6 ft. power cord (with plug)
(2) Cutting tips
(1) Electrode
Instruction Manual
Our Regular Price - $897
Our Sale Price - $847
FREE SHIPPING*
1/8"
Max: 18 Amps
Rated: 12 Amps
115 VAC
60 hz
20 Amps
30%
Height: 10"
Width: 9"
Length: 16"
Weight 55 lbs.
Mild Steel
20 ga. / 60 IPM
18 ga. / 60 IPM
10 ga. / 12 IPM
1/8" / 9 IPM
Not Required
The CM39 Plasma arc cutting system stands up to the toughest environments and provides precise, reliable cutting power with quality that is unrivaled in the plasma cutting industry. Perfect for the job site, farm, shop, fleet, or light industrial use.
Rugged Design
Equipped with a rugged case and a protective roll bar to protect the power control components
Auto Pilot Restart
For easy, quick cutting on expanded metal
Automatic Voltage Selection
Accepts standard 120 or 230 volt input power without hesitation and automatically switches to link up to the available power input
for the Sheet Metal Cutting World
Brings a new standard of cut quality and durability to metal cutting.
Our Regular Price - $1149
Our Sale Price - $1099
FREE SHIPPING*
Disables the power supply if the torch consumable parts are incorrectly assembled
SureLok Electrode
Eliminates tip wobble found in blow-apart torch designs resulting in a cleaner arc and a longer tip life
Reduced Heat Affected Zone for Quality Cut
Results in quicker fit up and better welds for the finished product
-Lightweight and portable
-Inverter technology
-Cuts mild steel, stainless steel, aluminum, copper or brass
- Drag tip torch system
- Long consumable life / low cost per cut
- Auto pilot restart
- ATC torch quick connect
- Automatic voltage selection
- Three year warranty
- Comes complete with - Thermal Dynamics SL60 75degree 1Torch (20 feet)
Genuine 3/8"
Maximum 5/8"
20-30 Amps
Adjustable
120-230 VAC
50/60 hz
35% @ 30 Amps
Height: 15"
Width: 12"
Length: 24"
Weight 39 lbs.
65 psi
5 cfm
Mild Steel
3/8" 10 IPM
1/4" 20 IPM
1/8" 75 IPM
1/16" 240 IPM
The Cutmaster 52 230 volt plasma arc cutting system operates on standard 230 volt single phase current. The Cutmaster 52 features state of the art inverter technology, which gives you superior cutting performance and increases cutting cycle. It's pilot arc/drag torch system allows you to cut rusted, painted or coated surfaces without prior surface preparation and grates, chain link fence and perforated steel without restarting the torch. The Cutmaster 52 plasma arc cutting system is an ideal system for auto body, farm, ranch, maintenance and fabrication uses.
FEATURES:
Operates on standard 230 volt current
Inverter technology / increases cutting cycle
Lighweight and portable
Cuts mild steel, stainless steel, aluminum, copper or brass
Long consumable life / low cost per cut
Thermal Dynamics pilot arc system
Thermal Dynamics automatic torch restart system
Built-in adjustable air regulation system
Built-in air pressure gauge
Thermostatic heat protection
Adjustable power output
One year warranty
COMES COMPLETE WITH:
20 ft. genuine Thermal Dynamics drag torch system
6 ft. power cord
(5) Cutting tips
(3) Electrode
(1) Gas distributor
Instruction Manual
Our Regular Price - $1740
Our Sale Price - $1665
FREE SHIPPING*
Max - 1+1/8"
Max: 45 Amps
208-230 VAC
50/60 hz
28 Amps
40%
@ 60 Amps
Height: 15"
Width: 12"
Length: 24"
Weight 43 lbs.
75 PSI
2.50 CFM
Mild Steel
1/2" / 9 IPM
3/8" / 15 IPM
1/8" / 100 IPM
16 ga. / 200 IPM
Introducing the next generation of innovative CUTMASTER Plasma Cutting Systems from Thermal Dynamics®.
The new 1Series™ CUTMASTER 82 Plasma Cutting systems include, as standard equipment, the revolutionary 1Torch™ universal plasma cutting torch and the easy-to-use ATC™ (Advanced Torch Connector) Quick Disconnect. All the advantages of 1Torch combined with proven CUTMASTER reliability and performance make CUTMASTER 1Series the new standard for flexibility, performance and value.
The CUTMASTER 82 is designed to serve the 1 inch and below cutting market. True to Thermal Dynamics' tradition of quality and innovation, CUTMASTER 81 provides the features metal fabrication professionals have come to expect.
Suggested Retail Price - $3186
Our Regular Price - $2405
Our Sale Price - $2266
FREE SHIPPING*
The CUTMASTER 82 is equipped with the same great 1Torch we introduced in 2002 as a universal replacement torch. We’ve added the ATC Quick Disconnect to the CUTMASTER 82 so you can easily convert from a hand to a machine torch operation in a matter of seconds.
The optional ATC Lead Extensions give flexibility and versatility to your cutting operations when you need it. Quick Disconnect Lead Extensions, in 15 ft. (4.6m), 25 ft. (7.6m) and 50 ft. (15.2m) lengths, make it easy and efficient to add (to a total maximum of 100 ft. / 30.5m) or subtract lead length according to the job requirements.
Available on all CUTMASTER 1Series systems, this feature is useful for cutting expanded metal or in any application where automatic pilot restart is desirable. In Auto Pilot Restart mode, the operator has continuous operation without having to re-trigger the torch switch.
Our new CUTMASTER 1Series start technology eliminates electronic interference that can occur with other designs. The 1Torch technology provides quick, reliable starts, a strong pilot arc to penetrate rust and paint, and the ability to cut expanded metal quickly and easily.
The CUTMASTER 82 is built for hard outdoor use as a portable plasma cutter. The innovative case design is the result of extensive stress testing and field evaluations. The wraparound roll bar protects the case from damage resulting from shocks and collisions. The new powder coat finish provides a harder, more resistant surface for protection against scratches & marks.
1Torch with ATC
Quick Disconnect
Optional ATC Lead
Extensions for Improved
Versatility
Auto Pilot Restart
1 Series Start Technology
Rugged Case Design
1+1/2" Maximum
20-80 Amps
Adjustable
208/230V 1 Ph
40%
@ 80 Amps
100%
@ 45 Amps
Height: 15"
Width: 12"
Length: 24"
Weight 43 lbs.
70 PSI
5.8 CFM
Mild Steel
1" / 5 IPM
3/4" / 10 IPM
1/2" / 18 IPM
1/4" / 200 IPM
16 ga / 350 IPM
25' Lead Extension - $219
50' Lead Extension - $399
Multi- Purpose Cart - $229
The TRUE Cut Series eliminates the concept of having to 'buy up,' purchasing a machine larger than you actually need.
With the introduction of the CUTMASTER, a one-half inch recommended capacity machine will cut one-half inch material ALL DAY, EVERY DAY – NO EXCEPTIONS.
Truth #1: True Confidence
The CUTMASTER® TRUE™ Series microprocessor controlled front panel LED’s assure extreme operator confidence and error free use from setup to clean up.
Truth #2: True Strength
The CUTMASTER TRUE Series allows you to work all day at our recommended cut capacity. But when you need that extra punch, you can be confident that it’s there
As if a 4 year unlimited power supply warranty wasn’t enough, the CUTMASTER TRUE Series is the only line of plasma cutting machines that features TRUE GUARD™ – a rugged roll bar for added durability.
Truth #4: True Tip™
The Thermal Dynamics CUTMASTER TRUE Series plasma system offers the only 60 Amp drag cutting tip on the market today.
Truth #5: True Flexibility
The new MULTI-VOLTAGE CUTMASTER TRUE Series features the flexible, patented 1Torch®. There’s one set of consumable parts for the entire range of machines, lead extensions provide cutting up to 100’ (30.5m) from power supply, and the flexibility to move quickly from hand to mechanized cutting with the change of a torch. (Add PCB for CNC interface).
Truth #6: True Portability
The CUTMASTER TRUE Series offers lighter, more portable machines without compromising performance.
So give us a call!
Customer responsible for unloading from delivery truck on truck freight shipments..
CT residents, add state sales tax.
Please see our TERMS page for terms and conditions.
Automotive Service Equipment .com
Don't wait - we can't call you - Contact us now!
and increase your shop's profits -
CONTACT US NOW!
Automotive Service Equipment .com
Get the best - for less!
CLICK HERE TO PLACE ORDER, TO REQUEST A CATALOG OR MORE INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL: contact@asedeals.com
CLICK HERE TO RECEIVE MONTHLY EMAILS OF OUR SPECIAL DEALS!
or just give us your feedback
Our monthly special deals are available exclusively to subscribers! Don't miss out - sign up now!
Your email address will be kept confidential and you won't recieve mass emailings from us.
ORDER STATUS / ORDER FORM / FINANCING / SITE SEARCH / REQUEST CATALOG
AUTOMOTIVE LIFTS / TRUCK LIFTS / AIR COMPRESSORS / JACKS
BATTERY CHARGERS / JUMP STARTERS / PARTS WASHERS / WELDERS / PLASMA CUTTERS
WHEEL SERVICE / TOOL BOXES / TUBE BENDERS / SHOP EQUIPMENT
