| Automotive Service Equipment Heavy duty lifts, four post truck lifts, bus lifts, truck hoists from BendPak |
Heavy truck lifts, bus lifts, fork lift / fork truck
lifts, RV lift, whatever your need is, we've got you
covered.
Bend Pak manufactures the best heavy truck lifts
on earth.
And thanks to Automotive Service Equipment,
you don't need to overpay!
lifts, RV lift, whatever your need is, we've got you
covered.
Bend Pak manufactures the best heavy truck lifts
on earth.
And thanks to Automotive Service Equipment,
you don't need to overpay!
Bend Pak is currently one of the largest suppliers in the world of high quality automotive repair products such as
heavy duty Above Ground Lifts, Tube Benders, Tire Changers, Wheel Balancers, Hydraulic Jacks and more.
They have been manufacturing automotive equipment for 40 years.
BendPak distributes to USA, Russia, Ireland, Argentina, China, Malaysia, Mexico, Australia, South Africa, and many
other countries.
Their customers include General Motors, Texaco, DHL International, Federal Express, as well as many others.
heavy duty Above Ground Lifts, Tube Benders, Tire Changers, Wheel Balancers, Hydraulic Jacks and more.
They have been manufacturing automotive equipment for 40 years.
BendPak distributes to USA, Russia, Ireland, Argentina, China, Malaysia, Mexico, Australia, South Africa, and many
other countries.
Their customers include General Motors, Texaco, DHL International, Federal Express, as well as many others.
Ultimate Safety
Fully Regulated Pressure System
Maintenance Free Power System
Automatic Safety Locks
5 Year Limited Warranty*
Fully Regulated Pressure System
Maintenance Free Power System
Automatic Safety Locks
5 Year Limited Warranty*
Standard Models
Rolling Bridge Options
Extended Length Models
Truck Models
ALI Certified
Rolling Bridge Options
Extended Length Models
Truck Models
ALI Certified
We wouldn't sell a product unless we were 100% confident in it. Make no mistake about it - these are some
of the best heavy duty lift and four post truck lifts in the world! Our good name depends on your satisfaction.
Even with the high quality comes value. That's what we're all about. We always offer great, low prices on all
our products - period.
of the best heavy duty lift and four post truck lifts in the world! Our good name depends on your satisfaction.
Even with the high quality comes value. That's what we're all about. We always offer great, low prices on all
our products - period.
Of course, Bend-Pak's limited 5 year warranty applies to all purchases! *
Bend Pak stands behind every product they make.
Remember when considering purchasing that inferior 4 post lift - you must compare apples to
apples.
You simply won't find a better product at a lower price - period.
Bend Pak stands behind every product they make.
Remember when considering purchasing that inferior 4 post lift - you must compare apples to
apples.
You simply won't find a better product at a lower price - period.
| We can't call you. - Contact us today! |
| Trying to compare Bend Pack four post lifts with others is like comparing apples and oranges. Every Bend-Pak 4 post heavy truck lift lift is designed to be stronger, safer and easier to use. |
Selection - Wide variety of designs are available
5 Year Limited Warranty - Bend Pak guarantees your safety and satisfaction by
offering a warranty few others will meet. Service is maintained through a
worldwide network of authorized service centers.
Superior Lifting System - High tensile strength cable drive system.
Durable Finish - High Gloss industrial epoxy specially formulated for offshore oil
platforms to resist corrosion and offers the ultimate protection from the
environment.
Ultimate Safety - Multi-Position pneumatic locks in all four columns, as well as
"deadman" style controls for precise lowering.
Adjustable runways - Accommodate a variety of tire widths.
Surface Mounted Design - Avoids environmental issues.
Easy Installation - No excavation required. All necessary hardware is included.
Integrated Hydraulic back-up system - for added safety.
Electric/Hydraulic Power Unit - incorporates a fully regulated pressure relief
system.
30" runway extensions available
Drive-Thru ramps available
Hydraulic cylinder tucked underneath the runway, so it's not in the way.
Top Quality - Only the finest quality components go into each Bendpak heavy
truck lift. Starting at the beginning with high quality ASTM steel and ending with
superior welds, bringing you a truly unequalled product
5 Year Limited Warranty - Bend Pak guarantees your safety and satisfaction by
offering a warranty few others will meet. Service is maintained through a
worldwide network of authorized service centers.
Superior Lifting System - High tensile strength cable drive system.
Durable Finish - High Gloss industrial epoxy specially formulated for offshore oil
platforms to resist corrosion and offers the ultimate protection from the
environment.
Ultimate Safety - Multi-Position pneumatic locks in all four columns, as well as
"deadman" style controls for precise lowering.
Adjustable runways - Accommodate a variety of tire widths.
Surface Mounted Design - Avoids environmental issues.
Easy Installation - No excavation required. All necessary hardware is included.
Integrated Hydraulic back-up system - for added safety.
Electric/Hydraulic Power Unit - incorporates a fully regulated pressure relief
system.
30" runway extensions available
Drive-Thru ramps available
Hydraulic cylinder tucked underneath the runway, so it's not in the way.
Top Quality - Only the finest quality components go into each Bendpak heavy
truck lift. Starting at the beginning with high quality ASTM steel and ending with
superior welds, bringing you a truly unequalled product
Model HDS-18 Heavy Duty Truck Lift
18,000 pound lifting capacity
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Style Standard
Lifting Capacity 18,000 lbs. / 8172 Kg.
Lifting height 72" / 1829mm
Lifting time 75 Seconds
Overall length 237" / 5766mm
Overall width 144" / 3658mm
Runway Width 18" / 457mm
Width between posts 125" / 3173mm
General wheelbase 183" / 4750mm
Motor (*) 220 VAC 60Hz. 1Ph
Alignment model available
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Style Standard
Lifting Capacity 18,000 lbs. / 8172 Kg.
Lifting height 72" / 1829mm
Lifting time 75 Seconds
Overall length 237" / 5766mm
Overall width 144" / 3658mm
Runway Width 18" / 457mm
Width between posts 125" / 3173mm
General wheelbase 183" / 4750mm
Motor (*) 220 VAC 60Hz. 1Ph
Alignment model available
| GUARANTEED LOWEST PRICES! |
| PLUS - FREE SHIPPING & HANDLING** |
** Within the continental US.
WARNING! - Never exceed the the rated capacity of the 4 post lift. Remain clear of
the lift when raising or lowering the vehicle. Keep clear of pinch points when lift is
moving. Always use manufacturer's suggested lift points. DO NOT operate a
damaged lift. Always ensure safeties are engaged before any attempt is made to
work on or in a vehicle.
the lift when raising or lowering the vehicle. Keep clear of pinch points when lift is
moving. Always use manufacturer's suggested lift points. DO NOT operate a
damaged lift. Always ensure safeties are engaged before any attempt is made to
work on or in a vehicle.
| All four-post lifts shown on this web site MUST be installed on concrete only. Concrete MUST be a minimum thickness of 4.5" for BP-18, 5" for BP-27 , and 6" for BP-35. Concrete MUST be 3,000 PSI minimum hardness. All installation instructions and floor requirements are included with lift and MUST be followed exactly for safety and warranty purposes. |
| AND FREE SHIPPING* |
27,000 pound lifting capacity
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Style Standard
Lifting Capacity 27,000 lbs. / 12258 Kg.
Lifting height 72" / 1829mm
Lifting time 75 Seconds
Overall length 287" / 7290mm
Overall width 144" / 3658mm
Runway Width 18" / 457mm
Width between posts 125" / 3173mm
General wheelbase 243" / 6274mm
Motor (*) 220 VAC / 60Hz. 1Ph
Alignment models available
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Style Standard
Lifting Capacity 27,000 lbs. / 12258 Kg.
Lifting height 72" / 1829mm
Lifting time 75 Seconds
Overall length 287" / 7290mm
Overall width 144" / 3658mm
Runway Width 18" / 457mm
Width between posts 125" / 3173mm
General wheelbase 243" / 6274mm
Motor (*) 220 VAC / 60Hz. 1Ph
Alignment models available
HDS-27 Heavy Truck Lift
35,000 pound lifting capacity
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Automatic leveling system
Style Standard
Lifting Capacity 35,000lbs.15876 Kg.
Lifting height 72" 1829mm
Lifting time 75 Seconds
Overall length 287" 7290mm
Overall width 144" 3658mm
Runway width 24" 610mm
Width between posts 125" 3173mm
General wheelbase 243" 6274mm
Motor (*) 220 VAC 60Hz. 1ph
Alignment models available
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Automatic leveling system
Style Standard
Lifting Capacity 35,000lbs.15876 Kg.
Lifting height 72" 1829mm
Lifting time 75 Seconds
Overall length 287" 7290mm
Overall width 144" 3658mm
Runway width 24" 610mm
Width between posts 125" 3173mm
General wheelbase 243" 6274mm
Motor (*) 220 VAC 60Hz. 1ph
Alignment models available
HDS-35 Heavy Truck Hoist
| Manufacturer's suggested price - $21,822 HDS-35 - Standard Length Our Regular Price - $18,135 Our Sale Price - $17,165 FREE SHIPPING* |
| Manufacturer's suggested price - $16,794 HDS-27 Lift - Standard Length Our Regular Price - $13,333 Our Sale Price - $12,660 FREE SHIPPING* |
| Manufacturer's suggested price - $13,096 Our Regular Price - $10825 Our Sale Price - $10300 FREE SHIPPING* |
Are you comfortable buying a lift from a manufacturer you never heard of
before? If you're like us, the answer is a loud "NO!"
You can buy with confidence when you buy a Bend-Pak lift - America's favorite.
You simply will not find a higher quality above ground lift at a lower price
- PERIOD.
before? If you're like us, the answer is a loud "NO!"
You can buy with confidence when you buy a Bend-Pak lift - America's favorite.
You simply will not find a higher quality above ground lift at a lower price
- PERIOD.
| Guaranteed lowest prices* - If you find these 4 post lifts advertised anywhere on the web for less, just tell us where you saw them, and we'll beat them. We will not be undersold! |
| HDS-27X - Extended Length Model Truck Hoist Overall Length (incl. ramps) - 357" Wheelbase capacity - 303" Our Regular Price - $15,395 Our Sale Price - $14,550 FREE SHIPPING* |
| HD-35X - Extended Length Model Heavy Truck Lift Overall Length (incl. ramps) - 357" Wheelbase capacity - 303" Our Regular Price - $20,815 Our Sale Price - $19,495 FREE SHIPPING* |
| BendPak manufactures some of the finest lifts in the world and is one of the largest names in the industry. You don't get that big by making an inferior product. Their manufacturing process is painstaking in it's quality control and state-of-the-art in design and construction. Bend Pak won't cut corners just to make a cheaper lift. |
| See specifications and prices below |
WARNING!
Here are four questions you must consider before buying that bargain-lift!
Who is the manufacturer? How long have they been around? Many have gone out of business
several times, each time leaving their prior customers who depend on them high and dry. What is
the manufacturer's reputation? Are their manufacturing facilities and equipment state-of-the-art?
For instance, BendPak's four post lifts use a futuristic UHMW ultra-high molecular weight
polyethyline load bearings. They never need lubrication and last virtually the life of the lift.
Bend-Pak is one of the leading manufacturers in the world and has been manufacturing
automotive equipment for forty years.
What is the lift's quality? This is the most important consideration when purchasing a lift, or
any product for that matter. How thick is the steel used to produce the columns? What is the
quality of the steel used in the manufacturing process? Bend-Pak's lifts are manufactured with 7
gauge ASTM steel - only the best. Are the posts manufactured of single-piece construction? If
they're not, you're sacrificing strength. BendPak's baseplates are an extra thick A36 steel plate.
This lessens the stress on your floor as well as the bottoms of the posts. The result? - you
guessed it. A safer lift! Are the welds quality welds, or are they inferior spot welds? What about
the other components? If they are of questionable origin, you may not notice within the first year
or two, but you will shortly after the warranty expires!
What about the cylinders? Bend Pak uses a top quality cylinder with pressure relief system
mounted underneath the runways, so it's out of the way. Those bargain lift systems typically
wear very early, and require continuous monitoring and maintenance. BendPak's technology
offers better reliability and smoother operation. And because they work under lower pressure,
they last much longer. That bargain lift isn't saving you as much money as you first thought - is
it?
How much money is that bargain lift really saving you? Short term, it might save you a
couple of hundred dollars, but then you factor in the down-time and the added maintenance and
monitoring of their lifts. Then add the time wasted on unnecessary procedures. Shortly, you will
begin to realize the lifetime of savings a quality lift like Bend-Pak will bring you.
Furthermore, BendPak offers on-site service if necessary. The bargain lift manufacturers that we
know of don't offer on-site service. Plus, we've found that parts availability is an issue with the
bargain lifts. Sure, they may have parts now, while this particular lift is still in production, but
what about when they discontinue this model? Will parts still be available years later? Usually not.
Remember, TIME=MONEY! If your technician is doing anything other than servicing a
customer's vehicle, you're losing money!
Quality does matter!
Think smarter. Think long term. Think Bend Pak.
Here are four questions you must consider before buying that bargain-lift!
Who is the manufacturer? How long have they been around? Many have gone out of business
several times, each time leaving their prior customers who depend on them high and dry. What is
the manufacturer's reputation? Are their manufacturing facilities and equipment state-of-the-art?
For instance, BendPak's four post lifts use a futuristic UHMW ultra-high molecular weight
polyethyline load bearings. They never need lubrication and last virtually the life of the lift.
Bend-Pak is one of the leading manufacturers in the world and has been manufacturing
automotive equipment for forty years.
What is the lift's quality? This is the most important consideration when purchasing a lift, or
any product for that matter. How thick is the steel used to produce the columns? What is the
quality of the steel used in the manufacturing process? Bend-Pak's lifts are manufactured with 7
gauge ASTM steel - only the best. Are the posts manufactured of single-piece construction? If
they're not, you're sacrificing strength. BendPak's baseplates are an extra thick A36 steel plate.
This lessens the stress on your floor as well as the bottoms of the posts. The result? - you
guessed it. A safer lift! Are the welds quality welds, or are they inferior spot welds? What about
the other components? If they are of questionable origin, you may not notice within the first year
or two, but you will shortly after the warranty expires!
What about the cylinders? Bend Pak uses a top quality cylinder with pressure relief system
mounted underneath the runways, so it's out of the way. Those bargain lift systems typically
wear very early, and require continuous monitoring and maintenance. BendPak's technology
offers better reliability and smoother operation. And because they work under lower pressure,
they last much longer. That bargain lift isn't saving you as much money as you first thought - is
it?
How much money is that bargain lift really saving you? Short term, it might save you a
couple of hundred dollars, but then you factor in the down-time and the added maintenance and
monitoring of their lifts. Then add the time wasted on unnecessary procedures. Shortly, you will
begin to realize the lifetime of savings a quality lift like Bend-Pak will bring you.
Furthermore, BendPak offers on-site service if necessary. The bargain lift manufacturers that we
know of don't offer on-site service. Plus, we've found that parts availability is an issue with the
bargain lifts. Sure, they may have parts now, while this particular lift is still in production, but
what about when they discontinue this model? Will parts still be available years later? Usually not.
Remember, TIME=MONEY! If your technician is doing anything other than servicing a
customer's vehicle, you're losing money!
Quality does matter!
Think smarter. Think long term. Think Bend Pak.
| Above Ground Heavy Truck Lifts, Four Post Lifts |
| WE WILL NOT BE UNDERSOLD. |
| BLOW-OUT TRUCK HOIST SALE |
| WARNING! - There's a distributor out there that carries these lifts at a lower price. - Until you factor in their inflated shipping charge. Another thing to beware of is the glut of lift distributors and manufacturers with "America" in their name. Some do this in hopes that you will assume the lift is made in the USA when it may not be. Just ask them where their lifts are made. Some also try the old bait and switch trick. They advertise a foreign bargain lift next to their more expensive ALI approved, USA made lifts hoping that you don't notice the difference. Don't be fooled by these tactics. We will never try to deceive you like this. |
| Bend Pak is one of the world's largest and most trusted car lift and truck lift manufacturers. Don't settle for that bargain lift. |
Air / Electric Work Station
Includes filter / lubricator / regulator that mounts directly
and easily on any column. Air and electrical outlets
provides remote access close to where you need it.
Price when purchased with lift
Price - $275
FREE SHIPPING*
Includes filter / lubricator / regulator that mounts directly
and easily on any column. Air and electrical outlets
provides remote access close to where you need it.
Price when purchased with lift
Price - $275
FREE SHIPPING*
DP30 Rolling Oil Drain
This convenient rolling oil drain can easily be
added to your lift for quick and easy oil or
fluid draining. 15 gallon capacity
Price when purchased with lift
Our Regular Price - $330
FREE SHIPPING*
This convenient rolling oil drain can easily be
added to your lift for quick and easy oil or
fluid draining. 15 gallon capacity
Price when purchased with lift
Our Regular Price - $330
FREE SHIPPING*
| OPTIONS / ACCESSORIES - |
30" Runway Extensions available for Models BP18, BP27 and BP35
Add some length to your runways to accomodate a longer wheelbase, without
having to pay for a larger lift! Sold in pairs. (prices are when purchased with lift).
HD18 extensions - $1270
HD27 extensions - $1270
HD35 extensions - $1390
FREE SHIPPING*
Add some length to your runways to accomodate a longer wheelbase, without
having to pay for a larger lift! Sold in pairs. (prices are when purchased with lift).
HD18 extensions - $1270
HD27 extensions - $1270
HD35 extensions - $1390
FREE SHIPPING*
40,000 pound lifting capacity
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Automatic leveling system
Style Standard
Lifting Capacity 40,000lbs.18144 Kg.
Lifting height 68-1/2" 1740mm
Lifting time 75 Seconds
Overall length 297" 7544mm
Overall width 154" 3912mm
Runway width 28" 711mm
Width between posts 134" 3404mm
Motor (*) 220 VAC 60Hz. 1ph
Electric/hydraulic power system
Heavy-duty cable lifting system
Self-lubricating bearings
Multi-position safety locks in each column
Push-button safety release
Optional drive-thru ramps available
Optional 30" runway extensions available
Runways include rail-kit for optional accessories
Adjustable runways
Automatic leveling system
Style Standard
Lifting Capacity 40,000lbs.18144 Kg.
Lifting height 68-1/2" 1740mm
Lifting time 75 Seconds
Overall length 297" 7544mm
Overall width 154" 3912mm
Runway width 28" 711mm
Width between posts 134" 3404mm
Motor (*) 220 VAC 60Hz. 1ph
HDS-40 Heavy Truck Hoist
| Manufacturer's suggested price - $26,032 HD-40 - Standard Length Our Regular Price - $21,060 Our Sale Price - $18,890 FREE SHIPPING* |
| HD-40X - Extended Length Model Heavy Truck Lift Overall Length (incl. ramps) - 357" Our Regular Price - $24,940 Our Sale Price - $21,220 FREE SHIPPING* |
| S&H FREE to a business address in the continental US (lower 48). Customer responsible for unloading from delivery truck on truck freight shipments.. CA & CT residents, add state sales tax. Please see our TERMS page for terms and conditions. |
Optional Rolling Jacks
From 7000 lb. capacity up to 25,000 lb. rolling bridge jacks
offer the ultimate in jacking speed and convenience. Their
exclusive telescoping roller design allows the runways to be
adjusted for different tread widths and precision rollers
enable you to position them anywhere under the vehicle.
Perfect for wheel and suspension work.Each jack comes
complete with stackable pad adapters and axle support
plates.
From 7000 lb. capacity up to 25,000 lb. rolling bridge jacks
offer the ultimate in jacking speed and convenience. Their
exclusive telescoping roller design allows the runways to be
adjusted for different tread widths and precision rollers
enable you to position them anywhere under the vehicle.
Perfect for wheel and suspension work.Each jack comes
complete with stackable pad adapters and axle support
plates.
| $1180 $1590 $2435 $2525 $3425 $3770 |
RJ-7 (7,000 lb. capacity rolling bridge)
RJ-9 (9,000 lb. capacity rolling bridge)
RJ-12 (12,000 lb. capacity rolling bridge)
RJ-15 (15,000 lb. capacity rolling bridge)
RJ-18 (18,000 lb. capacity rolling bridge)
RJ-25 (25,000 lb. capacity rolling bridge)
RJ-9 (9,000 lb. capacity rolling bridge)
RJ-12 (12,000 lb. capacity rolling bridge)
RJ-15 (15,000 lb. capacity rolling bridge)
RJ-18 (18,000 lb. capacity rolling bridge)
RJ-25 (25,000 lb. capacity rolling bridge)
| Click on image above to increase size |
| Click on the link above to view this lift at Jay Leno's Garage .com |
AK14 Airline Kit
Have air line integrated into your lift. Aids in
hooking up rolling jacks.
Price when purchased with 14,000 lb lift
Price - $225
Have air line integrated into your lift. Aids in
hooking up rolling jacks.
Price when purchased with 14,000 lb lift
Price - $225
AK27 Airline Kit
Have air line integrated into your lift. Aids in
hooking up rolling jacks.
Price when purchased with 18-40,000 lb lifts
Price - $250
Have air line integrated into your lift. Aids in
hooking up rolling jacks.
Price when purchased with 18-40,000 lb lifts
Price - $250
To start saving money
and increase your shop's profits -
CONTACT US NOW!
Automotive Service Equipment
Get the best - for less!
CLICK HERE TO REQUEST A CATALOG OR MORE
INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL: contact@asedeals.com
and increase your shop's profits -
CONTACT US NOW!
Automotive Service Equipment
Get the best - for less!
CLICK HERE TO REQUEST A CATALOG OR MORE
INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL: contact@asedeals.com
| " EXCLUSIVE: ONLY FOR THOSE WHO WANT TO SAVE SOME SERIOU$ MONEY! " - CLICK HERE TO RECEIVE MONTHLY EMAILS OF OUR SPECIAL DEALS! or just give us your feedback Our monthly special deals are available exclusively to subscribers! Don't miss out - sign up now! Your email address will be kept confidential and you won't receive mass emailings from us. |
| * - See our TERMS page for terms and conditions. |
| Automotive Service Equipment 379 Cardinal Circle Torrington, CT 06790 800-229-6218 |
