| Guaranteed lowest prices* - If you find these heavy truck mobile column lifts advertised anywhere on the web for less, just tell us where you saw them, and we'll beat them. Our prices will not be beaten! |
| MLS-18 Mobile High-Lift Jack Support Stand PRICE EACH - $1055 S&H FREE |
The MLS-18 is a support stand to be used to support raised heavy duty vehicles, to
facilitate maintenance and inspection procedures. The support stand is designed to be
used in sets of 4, 6 or 8 and must be placed under a level, raised vehicle, at the
support points designated by the vehicle manufacturer.
Each MLS-18 has a maximum rated capacity of 18,000 pounds.
Tripod design; each of the three (3) legs will evenly distribute the supported weight.
Each leg is equipped with a 6" square inch floor pad.
Can be easily moved and placed under a vehicle by means of two 5� diameter
wheels.
Equipped with a fold-away transport handle.
Center tube is spring assisted to facilitate adjustment of the stand.
Adjustable from 54" to 78"
10 pin positions
2.25" diameter self-locking ACME screw for fine adjustment of the stand height.
Specifications
Minimum height 54"
Maximum height 78"
Number of pin positions 10
Screw fine adjustment 6" / Adjustment Capability
Stroke 26 inches
Base diameter 32"
Wheels / Diameter 5"
Top Pad Diameter 7-1/4"
Stand capacity 18, 000 Lbs.
facilitate maintenance and inspection procedures. The support stand is designed to be
used in sets of 4, 6 or 8 and must be placed under a level, raised vehicle, at the
support points designated by the vehicle manufacturer.
Each MLS-18 has a maximum rated capacity of 18,000 pounds.
Tripod design; each of the three (3) legs will evenly distribute the supported weight.
Each leg is equipped with a 6" square inch floor pad.
Can be easily moved and placed under a vehicle by means of two 5� diameter
wheels.
Equipped with a fold-away transport handle.
Center tube is spring assisted to facilitate adjustment of the stand.
Adjustable from 54" to 78"
10 pin positions
2.25" diameter self-locking ACME screw for fine adjustment of the stand height.
Specifications
Minimum height 54"
Maximum height 78"
Number of pin positions 10
Screw fine adjustment 6" / Adjustment Capability
Stroke 26 inches
Base diameter 32"
Wheels / Diameter 5"
Top Pad Diameter 7-1/4"
Stand capacity 18, 000 Lbs.
| MLS-8T Light Vehicle Adapter Our Regular Price - $ Sorry, this is not available Yet |
| The optional Light Vehicle Adapter is an important part of the MCL lift system. The system provides a maximum lifting capacity of 16,000 lbs. while using two adapters and two mobile columns together. |
| Click on the link above to view Bend Pak lifts at Jay Leno's Garage .com |
| Standard carriage style (pair) - $3995 |
| Universal carriage style (pair) - $4143 |
| Automotive Service Equipment BendPak PCL-18HD Portable Column Lifts |
This one has it all. At a great low price too! BendPak really brought everything to the
table when they made this mobile column lifting system. It has all the features you
want, solid quality, and a very reasonable price.
table when they made this mobile column lifting system. It has all the features you
want, solid quality, and a very reasonable price.
| Looking for a top-of-the-line portable column lifting system that is affordable at the same time? Look no further! |
| Great products at a great, low price! Just Try to find lower prices. That's Automotive Service Equipment |
| Look, it's this simple. You just won't find a better quality mobile column lift at a lower price. If you find one cheaper, that's exactly what it is - CHEAPER. You must compare features and quality when considering your purchase. When you do, you'll come to only one conclusion - Automotive Service Equipment |
| But to take advantage of these great deals you've got to contact us! We can't call you! |
Bend-Pak / Ranger currently distributes to USA, Russia, Ireland, Argentina, China, Malaysia,
Mexico, Australia, South Africa, and other major countries. Their broad range of customers
include General Motors, Texaco International, DHL International, Federal Express and more.
Mexico, Australia, South Africa, and other major countries. Their broad range of customers
include General Motors, Texaco International, DHL International, Federal Express and more.
Bend-Pak Inc. manufactures professional quality
automotive repair equipment. They have been
manufacturing auto shop equipment for over 40 years and
are presently one of the largest suppliers in the world.
automotive repair equipment. They have been
manufacturing auto shop equipment for over 40 years and
are presently one of the largest suppliers in the world.
| BendPak PCL-18HD PORTABLE COLUMN LIFTING SYSTEM |
| Get the best for less at - Automotive Service Equipment asedeals.com Don't wait - we can't call you - Contact us now! |
| S&H FREE to a business address in the continental US (lower 48). Customer responsible for unloading from delivery truck on truck freight shipments.. CA & CT residents, add state sales tax. Please see our TERMS page for terms and conditions. |
| This super-duty portable column lift system has a combined lifting capacity of 72,000 pounds and reaches a maximum lifting height of 70" in just over one minute. |
| PCL-18HD-4 Set of Four Our Regular Price - $26770 Our Sale Price $24,295 FREE SHIPPING* |
| Bend Pak PCL-18HD Portable Column Lifting System HD 72,000 lbs. Capacity |
| SPECIFICATIONS |
| DIMENSIONS |
| PCL-18HD Portable Column Lifting System |
| Click on the images below to view larger picture |
18,000-pound per column capacity
72,000 pounds maximum system capacity
Three separate modes of operation - single, pair or all-four
70" lifting height for tall mechanics
72,000 pounds maximum system capacity
Three separate modes of operation - single, pair or all-four
70" lifting height for tall mechanics
Whether you need to lift a bus, fleet vehicle, or fire truck, BendPak's PCL-18HD lift system is designed to meet your
needs. This super-duty portable column lift system has a combined lifting capacity of 64,000-pounds and reaches a
maximum lifting height of 70" in just over one minute. Each lift column features a mechanical locking system, flow
control check valve, pressure relief valve and trouble-free hydraulics for increased safety and reliability. A unique
hydraulic control system allows operators to lower the columns manually in the event of a power supply failure.
Microprocessor controls combined with a unique hydraulic synchronization system ensures very smooth movement
over the complete travel. A hydraulic pallet-truck mechanism combined with a tight turning radius enables one person
to move the columns effortlessly. The PCL-18HD system's controls are easy to use and feature up/down and
emergency stop buttons.
needs. This super-duty portable column lift system has a combined lifting capacity of 64,000-pounds and reaches a
maximum lifting height of 70" in just over one minute. Each lift column features a mechanical locking system, flow
control check valve, pressure relief valve and trouble-free hydraulics for increased safety and reliability. A unique
hydraulic control system allows operators to lower the columns manually in the event of a power supply failure.
Microprocessor controls combined with a unique hydraulic synchronization system ensures very smooth movement
over the complete travel. A hydraulic pallet-truck mechanism combined with a tight turning radius enables one person
to move the columns effortlessly. The PCL-18HD system's controls are easy to use and feature up/down and
emergency stop buttons.
| FEATURES |
| SALE! - $500 OFF |
| Options |
| PCL-18HD-6 Set of Six (Three Phase Only) Our Regular Price - $41955 Our Sale Price $40,195 FREE SHIPPING* |
To start saving money
and increase your shop's profits -
CONTACT US NOW!
Automotive Service Equipment
Get the best - for less!
CLICK HERE TO REQUEST A CATALOG OR MORE
INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL: contact@asedeals.com
and increase your shop's profits -
CONTACT US NOW!
Automotive Service Equipment
Get the best - for less!
CLICK HERE TO REQUEST A CATALOG OR MORE
INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL: contact@asedeals.com
| " EXCLUSIVE: ONLY FOR THOSE WHO WANT TO SAVE SOME SERIOU$ MONEY! " - CLICK HERE TO RECEIVE MONTHLY EMAILS OF OUR SPECIAL DEALS! or just give us your feedback Our monthly special deals are available exclusively to subscribers! Don't miss out - sign up now! Your email address will be kept confidential and you won't receive mass emailings from us. |
Note: Standard voltage is 3 phase. Voltage for set of 6 requires 3 phase power. Set of four can use
single phase, but is 23 amps per column, and requires dedicated 90 amp circuit. 3 phase requires
45 amp circuit.
single phase, but is 23 amps per column, and requires dedicated 90 amp circuit. 3 phase requires
45 amp circuit.
| * - See our TERMS page for terms and conditions. |
| Automotive Service Equipment 379 Cardinal Circle Torrington, CT 06790 800-229-6218 |
HORSESHOE WIRING
The PCL-18-4 uses just three control cables (as opposed to four like other brands) so the front or back of the
lift is always accessible and free of interconnecting cable obstruction. Save valuable time by driving vehicles
in and out of the work area without disconnecting and reconnecting cables.
INTUITIVE TOUCHPAD CONTROLS
Featuring a sleek design with intuitive touchpad controls, the PCL-18 Series allows you to operate, view and
change operation parameters directly from each individual touch-sensitive display. Each touchpad displays
real-time data to ensure safe operation and to provide visual representation throughout all set-ups,
programming and lifting procedures.
SELF-DIAGNOSTIC FAULT CODES
If a system error is detected or if the life of a consumable part is nearly expired, fault codes are instantly
displayed on each LCD screen. This allows the user and service coordinator to take appropriate action. If
critical faults are detected, all operation functions will be disabled until the affected condition is corrected.
OFF-THE-SHELF COMPONENTRY
A Direct Logic™ PLC (Programmable Logic Control) and other off-the-shelf components from top-tier
hardware manufacturers control operation functions and column synchronization. Other lift systems may use
dedicated proprietary printed circuit board specific to that brand which can be very expensive should
replacement ever be needed - if and when available. All control system hardware conforms to CE, CSA,
ANSI, ASME, OSHA and UL regulations.
DESIGNED AND ASSEMBLED IN USA
At BendPak we make every effort to use USA-sourced components and engineering for our products.
Product development, assembly, testing and packaging of all PCL-18 lifts is undertaken at our manufacturing
facility in Santa Paula, California
The PCL-18-4 uses just three control cables (as opposed to four like other brands) so the front or back of the
lift is always accessible and free of interconnecting cable obstruction. Save valuable time by driving vehicles
in and out of the work area without disconnecting and reconnecting cables.
INTUITIVE TOUCHPAD CONTROLS
Featuring a sleek design with intuitive touchpad controls, the PCL-18 Series allows you to operate, view and
change operation parameters directly from each individual touch-sensitive display. Each touchpad displays
real-time data to ensure safe operation and to provide visual representation throughout all set-ups,
programming and lifting procedures.
SELF-DIAGNOSTIC FAULT CODES
If a system error is detected or if the life of a consumable part is nearly expired, fault codes are instantly
displayed on each LCD screen. This allows the user and service coordinator to take appropriate action. If
critical faults are detected, all operation functions will be disabled until the affected condition is corrected.
OFF-THE-SHELF COMPONENTRY
A Direct Logic™ PLC (Programmable Logic Control) and other off-the-shelf components from top-tier
hardware manufacturers control operation functions and column synchronization. Other lift systems may use
dedicated proprietary printed circuit board specific to that brand which can be very expensive should
replacement ever be needed - if and when available. All control system hardware conforms to CE, CSA,
ANSI, ASME, OSHA and UL regulations.
DESIGNED AND ASSEMBLED IN USA
At BendPak we make every effort to use USA-sourced components and engineering for our products.
Product development, assembly, testing and packaging of all PCL-18 lifts is undertaken at our manufacturing
facility in Santa Paula, California
PCL18 Portable Column Lift Features -
•18,000-lb. individual column capacity; 108,000-lb. maximum system capacity
•Two, four, or six column configurations can accommodate heavy duty trucks and light duty passenger
vehicles
•208-240 volt, 3-phase main power system - optional voltages available upon request
•SINGLE, PAIR or TEAM operation
•Simple operation, long service life and minimum maintenance
•Intuitive controls allow the lift to be fully programmed and controlled from any column
•Control systems feature 24-volt safety circuitry
•The PLC and main system components are standard off-the-shelf brands rather than proprietary
printed circuit boards or controls which can be very expensive to service or replace
•Smart electronics feature self-diagnostics and self-calibration functions
•Sealed and enclosed linear potentiometers feature precision potentiometric output and high
frequency response for precise synchronization and communication of all columns throughout all
operation cycles for precise, level lifting
•Variable height limit settings can be programmed for shops with low ceilings or when specific vehicle
service requirements necessitate specific rise heights
•Two-speed lowering option – turtle or rabbit speed settings
•Each column is equipped with a warning light and audible alarm for critical warning alerts
•Emergency shut off switches on each column quickly shut off power to the lift in the event an unsafe
condition is detected by the operator
•Separate key lock enclosure on each column
•Electronics are multi-fuse protected
•An enclosed electric-hydraulic power system that ensures quieter operation is better suited for sound-
sensitive areas
•Pallet-jack style steering wheels enable the columns to be lowered firmly on the floor vs. constantly
loaded spring-type steering wheels that can cause columns to roll when unladen with the weight of a
vehicle
•Low mounted power units and cylinders means a lower center of gravity making the columns easier to
move and less likely to topple vs. screw-drive systems with heavy overhead motors and drive systems
•Extended forks accommodate wide tires and deep wheel configurations
•Multi-width wheel forks with locking pins accommodate the widest range of wheels eliminating the
need for specialty wheel adapters
•Tandem 8” diameter polyurethane covered steel wheels with sealed roller bearings easily roll over
dirt and debris
•Heavy-duty steel carriage rollers feature turned, ground and polished axle pins
•Manual safety override valves on each column permit the lift to be lowered in the event of a power
outage without the need for manual hand cranks
•Durable forklift pockets provide simplistic handling when moving the lift columns from once facility to
another
•Inverted hydraulic cylinders feature an integrated safety valve to prevent accidental uncontrolled
lowering in the event of oil pressure loss
•Multiple, automatic, independent safety locks spaced every 4 inches ensure safe operation
•Space-saving design, reduced column weight and a tight turning radius provides improved mobility
•Use the lift to place vehicles on tall jack stands then use the columns to raise another vehicle in an
adjoining bay
•Durable powder-coat finish
•18,000-lb. individual column capacity; 108,000-lb. maximum system capacity
•Two, four, or six column configurations can accommodate heavy duty trucks and light duty passenger
vehicles
•208-240 volt, 3-phase main power system - optional voltages available upon request
•SINGLE, PAIR or TEAM operation
•Simple operation, long service life and minimum maintenance
•Intuitive controls allow the lift to be fully programmed and controlled from any column
•Control systems feature 24-volt safety circuitry
•The PLC and main system components are standard off-the-shelf brands rather than proprietary
printed circuit boards or controls which can be very expensive to service or replace
•Smart electronics feature self-diagnostics and self-calibration functions
•Sealed and enclosed linear potentiometers feature precision potentiometric output and high
frequency response for precise synchronization and communication of all columns throughout all
operation cycles for precise, level lifting
•Variable height limit settings can be programmed for shops with low ceilings or when specific vehicle
service requirements necessitate specific rise heights
•Two-speed lowering option – turtle or rabbit speed settings
•Each column is equipped with a warning light and audible alarm for critical warning alerts
•Emergency shut off switches on each column quickly shut off power to the lift in the event an unsafe
condition is detected by the operator
•Separate key lock enclosure on each column
•Electronics are multi-fuse protected
•An enclosed electric-hydraulic power system that ensures quieter operation is better suited for sound-
sensitive areas
•Pallet-jack style steering wheels enable the columns to be lowered firmly on the floor vs. constantly
loaded spring-type steering wheels that can cause columns to roll when unladen with the weight of a
vehicle
•Low mounted power units and cylinders means a lower center of gravity making the columns easier to
move and less likely to topple vs. screw-drive systems with heavy overhead motors and drive systems
•Extended forks accommodate wide tires and deep wheel configurations
•Multi-width wheel forks with locking pins accommodate the widest range of wheels eliminating the
need for specialty wheel adapters
•Tandem 8” diameter polyurethane covered steel wheels with sealed roller bearings easily roll over
dirt and debris
•Heavy-duty steel carriage rollers feature turned, ground and polished axle pins
•Manual safety override valves on each column permit the lift to be lowered in the event of a power
outage without the need for manual hand cranks
•Durable forklift pockets provide simplistic handling when moving the lift columns from once facility to
another
•Inverted hydraulic cylinders feature an integrated safety valve to prevent accidental uncontrolled
lowering in the event of oil pressure loss
•Multiple, automatic, independent safety locks spaced every 4 inches ensure safe operation
•Space-saving design, reduced column weight and a tight turning radius provides improved mobility
•Use the lift to place vehicles on tall jack stands then use the columns to raise another vehicle in an
adjoining bay
•Durable powder-coat finish
Minimum Column Height - 97.5"
Max Column Height - 140.5"
Max Liftong Height - 71.5"
Length of Lifting Fork - 13.5"
Overall Length / Depth - 47.5"
Width Inside Lifting Fork (Min) - 9.5"
Width Inside Lifting Forks (Max) - 22.7"
Overall Width - 44"
Turning Circle 40"
Column Weight 578 lbs ea.
Lifting Speed - 85 Seconds
Motor - 2 HP - 208 - 230V - 50 - 60 Hz - 3 Phase
Max Column Height - 140.5"
Max Liftong Height - 71.5"
Length of Lifting Fork - 13.5"
Overall Length / Depth - 47.5"
Width Inside Lifting Fork (Min) - 9.5"
Width Inside Lifting Forks (Max) - 22.7"
Overall Width - 44"
Turning Circle 40"
Column Weight 578 lbs ea.
Lifting Speed - 85 Seconds
Motor - 2 HP - 208 - 230V - 50 - 60 Hz - 3 Phase