CALL FOR OUR BEST DEALS!
Scroll down for prices.
Model XP9F - FloorPlate Model / Low Ceiling Lift
Standard Width
Don't take a chance on one of those no-name, bargain-basment two post lifts that are out there. And you sure don't want to take a chance by purchasing from some manufacturer out there that's only been around for a year or two!
What happens if they go out of business and you need a part?
Invest in a lift manufactured by Bend-Pak, one of the leading names in automotive lifts. A company that has been manufacturing automotive products for nearly 40 years.
Buy with confidence that you're getting a quality product.
When it comes to two post lifts, safety is too important to trust in an inferior, economy lift. - Especially when you're the one standing under it!
XP-SERIES – EXTRA POWER / EXTREME PERFORMANCE
This open-top two-post lift is a rugged 9,000-pound capacity floor plate lift that features a “Dual-Synchro” equalization system and user-friendly controls. These advanced, state-of-the-art models feature dual, direct-drive low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system, an exclusive BendPak design feature saving you maintenance costs throughout the life of the lift. Sixteen individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 5” cable sheaves are an exclusive feature found only on BendPak XP-Series lifts. This boosts performance still further and vastly increases the life expectancy of the lift, a lift most likely to be the last one you’ll ever have to purchase. These 9,000-pound capacity XP-Series lifts are also available with specialty arm configurations to increase productivity.
Optional Triple-Telescoping Arms - increases overall arm positioning to precisely lift variety of different wheel base vehicles that have unibody construction and/or provided pick-up points on the vehicle.
Optional Low-Profile Arms – squeeze under the lowest compact and sport vehicles.
Best Of Both Worlds – Triple-Telescoping, Low-Profile Arms – ‘Nuff said.
FEATURES...
Open-Top Convenience – This open-top model provides unobstructed space, floor-to-ceiling for lifting specialty vehicles like high cube delivery and work vans.
Wide or Narrow Selection – Wide or narrow designs are available allowing you to maximize use of your floor space.
Maintenance-Free Load Bearings - Rather than using roller bearings that need to be constantly lubricated, every XP-Series lift carriage uses futuristic UHMW ultra-high molecular weight polyethylene load bearings that never need lubrication and last virtually the life of the lift.
Single-Piece Columns - We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Dual Hydraulic Cylinders - Our simple yet proven design features the best in lifting technology. Dual hydraulic cylinders offers better reliability, smoother operation and less maintenance.
Single-Point Safety Release - The single point safety release and dead-man style operation controls makes every one of our XP-Series lifts easy to operate and safe to use.
On-The-Level - Our “Dual-Synchro” equalization system maintains equal lifting and provides operators with a stable, level-vehicle working condition.
Industrial-Grade Hydraulic Cylinders – Integrated into every XP-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground & polished C-1045/50 micro-alloy steel and plated to a minimum of .001? diametrically, to ensure superior cylinder operation and life. Specially designed, high durometer, mechanically loaded rod seals virtually eliminate rod seal leakage and a specially formulated abrasion resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from high yield-strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth and long duty life cylinders. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.
Lowered Arm Tube Supports – To minimize the chance of damaging vehicles with low hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.
Automatic Arm Restraints – Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear type arm restraints automatically disengage to provide easy positioning of the lift arms.
Taller Lift Carriages – Take a close look at our lift carriages (the lifting assembly that the arms are attached to) then take a look at the competition. You’ll notice our 53” tall carriages are considerably taller than most which minimizes the stress placed on the load bearings and columns.
High-Speed Hydraulics - Free-flow, high-pressure 3/8” hydraulic lines and a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for increased productivity.
Durable Powder Coat Finish – All XP-Series lifts feature a durable powder coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected then sandblasted. After, the parts are washed in our five-stage phosphate tanks that can accommodate parts up to 25’ long. Once cleaned, they’re immediately dried, to avoid rust production then outgassed. Outgassing is a process we take pride in which pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely cause chips in the powder. After the parts are washed and outgassed, any surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints then hung on an electrostatically grounded conveyor line. The powder is then applied using an electrostatic spray gun. The powder “sticks” to the parts similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for 45 minutes.
Free Truck and Van Adapters – Others charge extra for these necessary adapters but they’re standard with every XP-Series lift. Ideal for trucks and vans with running boards or auxiliary fuel tanks.
Auto Shut-Off – A rigid, padded safety shut-off bar automatically stops the lift should a vehicle come in contact with overhead structure.
Detailed Safety Instruction – Included with every lift are detailed installation and maintenance instructions, graphic safety and maintenance decals, and a vehicle lifting point guide and safety instruction placard that helps train personnel on proper safety and maintenance guidelines.
Shipping Details
It is the buyer's responsibility to unload the freight at their location. ASE will take no responsibility for additional charges of any kind that may incur related to, or involved with, the renting or acquisition of equipment of any kind necessary to unload items off of a delivering carrier's truck.
9,000-pound lifting capacity
Short column for low-ceiling installations
Standard Width configuration
Single-piece columns
Single point safety release
Chain lifting system combined with dual hydraulic cylinders
Electric / hydraulic power system
Large, 20" x 19" steel base plates
Self-lubricating dura-glide polyethylene bearing system
Safety locks in each column spaced every 3-inches
Automatic arm restraints
Heavy-duty dual 3/8” equalizer cables with oversize sheaves
Truck and van adapters standard
Shipping Information
Dimensions - 128" x 17" x 48"
Shipping Weight - 1550 lbs.
XP9F Floorplan
XP9F Manual
XP-9F Standard Width Model
Lifting Capacity 9,000 lbs.
Height Overall 128"
Width Overall (Outside of Base Plate) 132"
Width (Outside of Columns) 124"
Floor Plate Cover Height 2"
Inside Columns 102"
Reach (Front Arm Min.) 32"
Reach (Front Arm Max.) 47"
Reach (Rear Arm Min.) 35"
Reach (Rear Arm Max.) 52"
Min. Pad Height(*) 4-1/2"
Rise 72"
Max Lift Height (Pad Only) 76"
Max Lift Height (6" Adapter) 82"
Drive-Thru Clearance 93"
Motor (**) 220 VAC / 60 Hz. 1Ph.
* Low profile arms are available as an option.
** Special voltages available upon request.
The design, material and specifications are subject to change without notice.
Manufacturers Suggested Retail Price - $3005
Our Price - $2610
FREE SHIPPING!
Here are five questions you must consider before buying that bargain-lift!
What is the lift's quality? This is the most important consideration when purchasing a lift, or any product for that matter. How thick is the steel used to produce the columns? What is the quality of the steel used in the manufacturing process? Bend-Pak's lifts are manufactured with 7 gauge ASTM steel - only the best. Are the posts manufactured of single-piece construction? If they're not, you're sacrificing strength. Bend-Pak's baseplates are an extra thick A36 steel plate. This lessens the stress on your floor as well as the bottoms of the posts. The result? - you guessed it. A safer lift! Are the welds quality welds, or are they inferior spot welds? What about the other components? If they are of questionable origin, you may not notice within the first year or two, but you will shortly after the warranty expires!
What about the cylinders? Bend-Pak uses two "direct drive" cylinders to directly lift the carriages. Many bargain lift manufacturers use only a single cylinder to save money. Others use two cylinders, but still use them in conjunction with a system of pulleys and cables. Bend-Pak's dual direct drive cylinders eliminate the need for cables, chains, pulleys and screw mechanisms commonly found on those bargain lifts. Those systems typically wear very early, and require continuous monitoring and mainenance. Bend-Pak's "direct drive" technology offers better reliability and smoother operation. And because they work under lower pressure, they last much longer. That bargain lift isn't saving you as much money as you first thought - is it?
Does the manufacurer sacrifice safety to save money? This is unacceptable to Bend-Pak, and it should be to anyone who works under a lift! Does that bargain lift have mechanical safety locks that automatically engage up and down both posts? Bend-Pak's safeties are every three inches. Bend-Pak lifts incorporate redundant safety features to ensure your safety. Does the lift comply with ETL and ALI standards? No one should even consider a lift that doesn't! Only a handfull of manufacturers do, and of those that do, Bend-Pak is among the most affordable. Not sure if the other manufacturer is an ALI, (Automotive Lift Institute) certified manufacturer? If they don't mention that they are - they most likely aren't. But if you want to check on ALI's website to see for yourself, CLICK HERE. Beware manufacturers that claim they are approved and tested by anybody but ALI. ALI is the industry standard and the recognized industry watchdog. ALI and ETL approved lifts must conform with the most strict international safety and quality standards.
How much money is that bargain lift really saving you? Short term, it might save you a couple of hundred dollars, but when you factor in the down-time and the added maintenance of lubricating and constant monitoring of their slider blocks and cables. Then add the time wasted on unnecessary proceedures such as manually locking and releasing the arms every time the arms are positioned or lowered. Shortly, you will begin to realize the lifetime of savings a quality lift like Bend-Pak will bring you. Furthermore, Bend-Pak offers on-site service if necessary. The bargain lift manufacturers that we know of don't offer on-site service. Plus, we've found that parts availability is an issue with the bargain lifts. Sure, they may have parts now, while this particular lift is still in production, but what about when they discontinue this model? Will parts still be available years later? Usually not.
Remember, TIME=MONEY! If your technician is doing anything other than servicing a customer's vehicle, you're losing money!
Quality does matter!
Think smarter. Think long term. Think Bend-Pak.
If it doesn't say Bend-Pak on it, - IT ISN'T!
Is their lift ALI certified or ETL Approved?
How long have they been in business?
Have you ever even heard of them before?
You can buy with confidence when you buy a Bend-Pak lift - America's favorite.
You simply will not find a higher quality above ground lift at a lower price
- PERIOD.
Because they're better by design. Check out Why -
The BendPak XP Series two post lifts are one of the world's most powerful, safest and dependable lifts money can buy. At Bend-Pak, they pay strict attention to detail when it comes to product design, manufacturing, testing and support. Customer driven features are incorporated into each of their products to fit your specific needs. From rugged testing and quality control to computerized flame cutters, punching and cutting units, multi-axis machining centers, certified welders and accomplished engineers, they deliver a total solution you can count on for your lifting needs. Bend-Pak voluntarily meet and exceed American, European and other world-wide industry standards. When it comes to auto lifts, safety is too important to overlook!
Others charge extra for these necessary adapters. With the XP Series, you get an 8 piece set of stackable adapters at no extra charge. Ideal for trucks and vans with running boards or auxiliary tanks. Rubber pads protect vehicle undercoating and minimizes damage to pinch welds and unibody construction.
- Jim McConnell
Cedar City, UT
All the top lift manufacturer's automotive lifts are tested and certified by ALI and ETL. Whether you get a Bend-Pak lift or not, make sure you only get a lift that has been tested and certified by ALI and ETL. The recognized industry body for testing and certification.
CLICK HERE for more info about who ALI is and the standards they require
Don't be fooled by these tactics. We will never try to deceive you like this.
Bend-Pak is one of America's largest and most trusted car lift and truck lift manufacturers. Don't settle for a bargain lift.
Includes filter / lubricator / regulator that mounts directly and easily on any column. Air and electrical outlets provides remote access close to where you need it.
Price - $205
Part # 5174002
Set = $405
Part # 5174006
Set of four - $135
Part # 5174004
Set = $340
Want your two post lift with low profile arms? This will change lowered pad height to 3.5" Add $490
Want triple telescoping arms? - Add $295 per pair.
Bend-Pak won't cut corners just to make a cheaper lift.
Member of the Automotive Lift Institute.
5 Year limited warranty - Call for details.
Safety locks in each column automatically reset for added safety. Brings you peace of mind.
Time = Productivity. - Raising lift is activated by an easy to use single position push-button switch.
With the safeties disengaged, the lift can be gravity lowered without electrical power. Don't worry about being stranded.
2 HP Power unit can be located on either post on symmetric models.
Equipped with automatic arm restraints. A convenient feature.
High tensile strength leaf chain, (for Floorplate lifts), and heavy duty direct-drive cylinders, (for Clearfloor lifts) are used for greater durability & safety.
Each 9.5" x 9.5" column is constructed of 7 gauge ASTM steel for maximum strength.
17" x 19" baseplates are constructed of A36 steel plate - Now that's strong!
Carriages have reinforced arm pin holes. These folks at Bend-Pak overlook nothing!
Durable - Galvanized steel aircraft cables are used for equalization.
Arm pins are constructed of 1.5" diameter ASTM steel rod.
High quality standards - Carriage slider blocks are virtually maintenance free and self lubricating.
20 safety positions are located in each column and spaced 3" apart.
Automatic locks located in each post for extra safety. Feel confident in the lift you buy.
Hydraulic pump incorporates a fully regulated pressure relief system to prevent overload.
A metered flow control valve is built into hydraulic cylinders to control lowering speed in case of hose rupture. Safety is always a priority.
Electric-hydraulic power unit is equipped with an American made 2 H.P. industrial grade motor.
All necessary installation hardware is included. So there's no delay in installing.
Truck and van adapters come standard. Many other manufacturers charge extra.
High industrialquality epoxy specially formulated is used on every two post lift to provide superior resistance against corrosion and offers the ultimate protection from the elements.
Wide or narrow selection - to maximize your shop space.
Standard Clearfloor styles - The Clearfloor style uses an overhead "Dual-Syncro" equalization system that maintains equal lifting and provides unobstructed floor space. This allows technicians to easily move transmission jacks, tool boxes, oil drains and other equipment underneath the vehicle.
Asymmetric Styles - The Ultimate two post lift. Not only does the clearfloor design feature provide unobstructed floor space, but the asymmetric design permits offset lifting for added clearance when opening vehicle doors.
True Single piece columns - For added strength and less fatigue under heavy load conditions. Asymmetric models offer columns rotated at 30 degrees to maximize clearance when opening vehicle doors.
Unlike other brands, The cylinders do not extend out the top of the lift posts when the lift is fully raised. No need to punch holes in your ceiling for added cylinder clearance.
Low Profile lifting arms - Unlike many other lifts, you don't need to worry about putting a ding in the bottom of the vehicle's doors when you open them
53" lift carriages. Taller lift carriages is superior design feature that is much stronger than others.
ETL approved and ALI certified - Don't get a lift that isn't! Strict international safety and quality guidelines are not only met, but exceeded in many cases.
- Mike Goldman
Desert Drivetrane
Fort Mohave, AZ
Concrete MUST be a minimum thickness of 4".
Concrete MUST be 3,000 PSI minimum hardness.
All installation instructions and floor requirements are included with lift and MUST be followed exactly for safety and warranty purposes.
If you find these 2 post lifts advertised anywhere on the web for less,
just tell us where you saw them, and we'll beat them.
Our prices will not be beaten!
Bend-Pak Inc. lifts are warranted for five years on equipment structure, to be free of defects in material and workmanship. Bend-Pak Inc. will repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Bend-Pak will pay labor costs for the first 12 months only on parts returned as described previously. This warranty does not extend to defects caused by ordinary wear, abuse, misuse, overloading, shipping damage, concrete floor problems, improper installation, or lack of required maintenance.
A Must Read for anybody placing a vehicle on a two post lift.
ALI has put out videos instructing lift safety practices.
Hosted by racing legends Richard & Kyle Petty, this 24-minute DVD is based on the ALI Safety Manual; includes safety manual, safety tips card, written test, and answer key.
They also have a manual that instructs user where proper jacking points are on most vehicles.
Extra care must be taken when placing heavy vehicles and extra long wheelbase vehicles on a two post lift. Particularly on asymmetric lifts. Weight distribution and Balance is vital on two post lifts. Arm restraints are for the purpose of holding the arm in place until it makes contact with the vehicle. They are not intended to be relied upon to hold an improperly positioned vehicle in place.
Bend-Pak stands behind every product they make.
Remember when considering purchasing that inferior lift you must compare apples to apples.
You simply won't find a better product at a lower price - period.
Connecticut & California residents add state sales tax.
S&H Free to any business address within US (lower 48).
Deliveries to a residential address, add $40.
Customer is responsible for removal from delivery truck, hydraulic oil, installation and electrical connections. Installers are available in most locations for an additional fee.
Automotive Service Equipment .com
Don't wait - we can't call you - Contact us now!
and increase your shop's profits -
CONTACT US NOW!
Automotive Service Equipment .com
Get the best - for less!
CLICK HERE TO PLACE ORDER, TO REQUEST A CATALOG OR MORE INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL: contact@asedeals.com
CLICK HERE TO RECEIVE MONTHLY EMAILS OF OUR SPECIAL DEALS!
or just give us your feedback
Our monthly special deals are available exclusively to subscribers! Don't miss out - sign up now!
Your email address will be kept confidential and you won't recieve mass emailings from us.
ORDER STATUS / ORDER FORM / FINANCING / SITE SEARCH / REQUEST CATALOG
AUTOMOTIVE LIFTS / TRUCK LIFTS / AIR COMPRESSORS / JACKS
BATTERY CHARGERS / JUMP STARTERS / PARTS WASHERS / WELDERS / PLASMA CUTTERS
WHEEL SERVICE / TOOL BOXES / TUBE BENDERS / SHOP EQUIPMENT
