| Automotive Service Equipment 12,000 lb. Floor Plate heavy duty lifts, truck lifts, above ground lifts, heavy truck vehicle lifts by Bend Pak |
Bend Pak is currently one of the largest suppliers in the world of high quality automotive repair products such as
Above Ground Lifts, Tube Benders, Tire Changers, Wheel Balancers, Hydraulic Jacks and more.
They have been manufacturing automotive equipment for 40 years.
Bend-Pak presently distributes products to Russia, Ireland, Argentina, China, Malaysia, Mexico, Australia, South Africa,
and many other countries.
Their customers include General Motors, Texaco, DHL International, Federal Express, as well as many others.
Above Ground Lifts, Tube Benders, Tire Changers, Wheel Balancers, Hydraulic Jacks and more.
They have been manufacturing automotive equipment for 40 years.
Bend-Pak presently distributes products to Russia, Ireland, Argentina, China, Malaysia, Mexico, Australia, South Africa,
and many other countries.
Their customers include General Motors, Texaco, DHL International, Federal Express, as well as many others.
| We wouldn't sell a product unless we were 100% confident in it. Make no mistake about it - these are some of the best products in the world! Our good name depends on your satisfaction. Even with the high quality comes value. That's what we're all about. We always offer the guaranteed lowest prices on all our products - period. |
| Of course, Bend-Pak's limited 5 year warranty* applies to all purchases! Bend Pak stands behind every product they make. Remember when considering purchasing that inferior lift - you must compare apples to apples. You simply won't find a better product at a lower price - period. |
| Trying to compare Bend Pack heavy duty two post lifts with others is like comparing apples and oranges. Every BendPak truck lift is designed to be stronger, safer and easier to use. Bend Pak won't cut corners just to make a cheaper vehicle lift. |
FloorPlate 12,000 lb. Heavy Duty Lift
Model XPR-12FD Two Post Hoist
Capacity
Max. Lifting Height
Lifting Time
Overall Height
Overall Width
Width Between Posts
Drive Through Clearance
Minimum Pad Height
Motor
Capacity
Max. Lifting Height
Lifting Time
Overall Height
Overall Width
Width Between Posts
Drive Through Clearance
Minimum Pad Height
Motor
| BendPak The Best name in the lift Business! Bend Pak is one of the largest and most trusted lift manufacturers. |
| GUARANTEED LOWEST PRICES! |
| PLUS - FREE SHIPPING & HANDLING* |
Floor Plate Model - Allows for the full versatility of
a two-post lift and conforms with lower ceiling
heights.
This is a direct drive lift and has a low profile
covered floor plate. Plus, it now has triple
telescoping arms!
a two-post lift and conforms with lower ceiling
heights.
This is a direct drive lift and has a low profile
covered floor plate. Plus, it now has triple
telescoping arms!
12,000 lbs.
83" with adapters
45 seconds
145"
155"
118"
106"
5"
220VAC 60Hz 1ph.
83" with adapters
45 seconds
145"
155"
118"
106"
5"
220VAC 60Hz 1ph.
| Suggested Retail Price - $5750 Our Regular Price - $4485 Our Sale Price - $4100 FREE SHIPPING* |
| Minimum required concrete slab - For 12,000 lb. and 15,000 lb. Truck Lifts - Minimum depth - 6" length - 170" width - 120" For 18,000 lb truck lift models - 8" thick Customer responsible to remove package from delivery truck. |
| GUARANTEED LOWEST PRICES!* |
| AND FREE SHIPPING!* |
| CLICK ABOVE TO VIEW YOUR CART AND COMPLETE YOUR ORDER OVER OUR SECURE SERVER |
Are you comfortable buying a lift from a manufacturer you
never heard of before? If you're like us, the answer is a loud
"NO!"
You can buy with confidence when you buy a BendPak lift -
America's favorite.
You simply will not find a higher quality above ground heavy
truck lift at a lower price
- PERIOD.
never heard of before? If you're like us, the answer is a loud
"NO!"
You can buy with confidence when you buy a BendPak lift -
America's favorite.
You simply will not find a higher quality above ground heavy
truck lift at a lower price
- PERIOD.
| Warning! - Beware comparisons from other distributors out there claiming their lifts are "same as" or "just like" Bend Pak. If it doesn't say BendPak on it, - IT ISN'T! |
| BendPak manufactures some of the finest lifts in the world and is one of the largest names in the industry. You don't get that big by making an inferior product. Their manufacturing process is painstaking in it's quality control and state-of-the-art in design and construction. Bend Pak won't cut corners just to make a cheaper lift. |
| See Prices & Features Below |
Who is the manufacturer? How long have they been around? Many have gone out of business
several times, each time leaving their prior customers who depend on them high and dry. What is
the manufacturer's reputation? Are their manufacturing facilities and equipment state-of-the-art?
For instance; Bend-Pak's two post lifts use a futuristic UHMW ultra-high molecular weight
polyethyline load bearings. They never need lubrication and last virtually the life of the lift.
What is the lift's quality? This is the most important consideration when purchasing a lift, or
any product for that matter. How thick is the steel used to produce the columns? What is the
quality of the steel used in the manufacturing process? BendPak's lifts are manufactured with 7
gauge ASTM steel - only the best. Are the posts manufactured of single-piece construction? If
they're not, you're sacrificing strength. Bend-Pak's base plates are an extra thick A36 steel plate.
This lessens the stress on your floor as well as the bottoms of the posts. The result? - you guessed
it. A safer lift! Are the welds quality welds, or are they inferior spot welds? What about the other
components? If they are of questionable origin, you may not notice within the first year or two,
but you will shortly after the warranty expires!
What about the cylinders? BendPak uses two "direct drive" cylinders to directly lift the
carriages. Many bargain lift manufacturers use only a single cylinder to save money. Others may
use two cylinders, but they still work in conjunction with a system of pulleys and cables.
Bend-Pak's dual direct drive cylinders eliminate the need for cables, chains, pulleys and screw
mechanisms commonly found on those bargain lifts. Even when they do use two cylinders, those
systems typically wear very early, and require continuous monitoring and maintenance. Bend-Pak's
"direct drive" technology offers better reliability and smoother operation. And because they work
under lower pressure, they last much longer. That bargain lift isn't saving you as much money as
you first thought - is it?
Does the manufacturer sacrifice safety to save money? This is unacceptable to Bend Pak, and
it should be to anyone who works under a lift! Does that bargain lift have mechanical safety locks
that automatically engage up and down both posts? Bend-Pak's safeties are every three inches.
BendPak lifts incorporate redundant safety features to ensure your safety. Does the lift comply
with ETL and ALI standards? No one should even consider a lift that doesn't! Only a handful of
manufacturers do, and of those that do, Bend-Pak is among the most affordable. Not sure if the
other manufacturer is an ALI (Automotive Lift Institute) certified manufacturer? If they don't
mention that they are - they most likely aren't. But if you want to check on ALI's website to see
for yourself, CLICK HERE. Beware manufacturers that claim they are approved and tested by
anybody but ALI. ALI is the industry standard and the recognized industry watchdog. ALI and
ETL approved lifts must conform with the most strict international safety and quality standards.
Look for the ALI Logo next to any certified lift.
How much money is that bargain lift really saving you? Short term, it might save you a couple
of hundred dollars, but when you factor in the down-time and the added maintenance of lubricating
and constant monitoring of their slider blocks and cables. Then add the time wasted on
unnecessary procedures such as manually locking and releasing the arms every time the arms are
positioned or lowered. Shortly, you will begin to realize the lifetime of savings a quality lift like
BendPak will bring you. Furthermore, BendPak offers on-site service if necessary. The bargain lift
manufacturers that we know of don't offer on-site service. Plus, we've found that parts availability
is an issue with the bargain lifts. Sure, they may have parts now, while this particular lift is still in
production, but what about when they discontinue this model? Will parts still be available years
later? Usually not.
Remember, TIME=MONEY! If your technician is doing anything other than servicing a customer's
vehicle, you're losing money!
Quality does matter!
Think smarter. Think long term. Think Bend Pak.
several times, each time leaving their prior customers who depend on them high and dry. What is
the manufacturer's reputation? Are their manufacturing facilities and equipment state-of-the-art?
For instance; Bend-Pak's two post lifts use a futuristic UHMW ultra-high molecular weight
polyethyline load bearings. They never need lubrication and last virtually the life of the lift.
What is the lift's quality? This is the most important consideration when purchasing a lift, or
any product for that matter. How thick is the steel used to produce the columns? What is the
quality of the steel used in the manufacturing process? BendPak's lifts are manufactured with 7
gauge ASTM steel - only the best. Are the posts manufactured of single-piece construction? If
they're not, you're sacrificing strength. Bend-Pak's base plates are an extra thick A36 steel plate.
This lessens the stress on your floor as well as the bottoms of the posts. The result? - you guessed
it. A safer lift! Are the welds quality welds, or are they inferior spot welds? What about the other
components? If they are of questionable origin, you may not notice within the first year or two,
but you will shortly after the warranty expires!
What about the cylinders? BendPak uses two "direct drive" cylinders to directly lift the
carriages. Many bargain lift manufacturers use only a single cylinder to save money. Others may
use two cylinders, but they still work in conjunction with a system of pulleys and cables.
Bend-Pak's dual direct drive cylinders eliminate the need for cables, chains, pulleys and screw
mechanisms commonly found on those bargain lifts. Even when they do use two cylinders, those
systems typically wear very early, and require continuous monitoring and maintenance. Bend-Pak's
"direct drive" technology offers better reliability and smoother operation. And because they work
under lower pressure, they last much longer. That bargain lift isn't saving you as much money as
you first thought - is it?
Does the manufacturer sacrifice safety to save money? This is unacceptable to Bend Pak, and
it should be to anyone who works under a lift! Does that bargain lift have mechanical safety locks
that automatically engage up and down both posts? Bend-Pak's safeties are every three inches.
BendPak lifts incorporate redundant safety features to ensure your safety. Does the lift comply
with ETL and ALI standards? No one should even consider a lift that doesn't! Only a handful of
manufacturers do, and of those that do, Bend-Pak is among the most affordable. Not sure if the
other manufacturer is an ALI (Automotive Lift Institute) certified manufacturer? If they don't
mention that they are - they most likely aren't. But if you want to check on ALI's website to see
for yourself, CLICK HERE. Beware manufacturers that claim they are approved and tested by
anybody but ALI. ALI is the industry standard and the recognized industry watchdog. ALI and
ETL approved lifts must conform with the most strict international safety and quality standards.
Look for the ALI Logo next to any certified lift.
How much money is that bargain lift really saving you? Short term, it might save you a couple
of hundred dollars, but when you factor in the down-time and the added maintenance of lubricating
and constant monitoring of their slider blocks and cables. Then add the time wasted on
unnecessary procedures such as manually locking and releasing the arms every time the arms are
positioned or lowered. Shortly, you will begin to realize the lifetime of savings a quality lift like
BendPak will bring you. Furthermore, BendPak offers on-site service if necessary. The bargain lift
manufacturers that we know of don't offer on-site service. Plus, we've found that parts availability
is an issue with the bargain lifts. Sure, they may have parts now, while this particular lift is still in
production, but what about when they discontinue this model? Will parts still be available years
later? Usually not.
Remember, TIME=MONEY! If your technician is doing anything other than servicing a customer's
vehicle, you're losing money!
Quality does matter!
Think smarter. Think long term. Think Bend Pak.
WARNING!
Here are five questions you must consider before buying that bargain-lift!
Here are five questions you must consider before buying that bargain-lift!
You simply must view why Bend-Pak's two post heavy duty truck lift design features make it
stand out above all other manufacturers.
stand out above all other manufacturers.
Easy to install, environmentally safe.
Member of the Automotive Lift Institute.
5 Year limited warranty - Call for details.
Safety locks in each column automatically reset for added safety. Brings you peace of mind.
Time = Productivity. - Raising lift is activated by an easy to use single position push-button switch.
With the safeties disengaged, the lift can be gravity lowered without electrical power. Don't worry about being
stranded.
2 HP Power unit can be located on either post.
Equipped with automatic arm restraints. A convenient feature.
Each column is constructed of 7 gauge ASTM steel for maximum strength.
Baseplates are constructed of A36 steel plate - Now that's strong!
Carriages have reinforced arm pin holes. These folks at Bend-Pak overlook nothing!
Durable - Galvanized steel aircraft cables are used for equalization.
Arm pins are constructed of 1.5" diameter ASTM steel rod.
High quality standards - Carriage slider blocks are virtually maintenance free and self lubricating.
20 safety positions are located in each column and spaced 3" apart.
Automatic locks located in each post for extra safety. Feel confident in the lift you buy.
Hydraulic pump incorporates a fully regulated pressure relief system to prevent overload.
A metered flow control valve is built into hydraulic cylinders to control lowering speed in case of hose rupture. Safety
is always a priority.
Electric-hydraulic power unit is equipped with an American made 2 H.P. industrial grade motor.
All necessary installation hardware is included. So there's no delay in installing.
Truck and van adapters come standard. Many other manufacturers charge extra.
Wide or narrow selection - to maximize your shop space.
Standard Clear floor styles - The Clear floor style uses an overhead "Dual-Syncro" equalization system that maintains
equal lifting and provides unobstructed floor space. This allows technicians to easily move transmission jacks, tool
boxes, oil drains and other equipment underneath the vehicle.
True Single piece columns - For added strength and less fatigue under heavy load conditions. Asymmetric models
offer columns rotated at 30 degrees to maximize clearance when opening vehicle doors.
Unlike other brands, The cylinders do not extend out the top of the lift posts when the lift is fully raised. No need to
punch holes in your ceiling for added cylinder clearance.
ETL approved and ALI certified - Don't get a lift that isn't! Strict international safety and quality guidelines are not only
met, but exceeded in many cases.
Member of the Automotive Lift Institute.
5 Year limited warranty - Call for details.
Safety locks in each column automatically reset for added safety. Brings you peace of mind.
Time = Productivity. - Raising lift is activated by an easy to use single position push-button switch.
With the safeties disengaged, the lift can be gravity lowered without electrical power. Don't worry about being
stranded.
2 HP Power unit can be located on either post.
Equipped with automatic arm restraints. A convenient feature.
Each column is constructed of 7 gauge ASTM steel for maximum strength.
Baseplates are constructed of A36 steel plate - Now that's strong!
Carriages have reinforced arm pin holes. These folks at Bend-Pak overlook nothing!
Durable - Galvanized steel aircraft cables are used for equalization.
Arm pins are constructed of 1.5" diameter ASTM steel rod.
High quality standards - Carriage slider blocks are virtually maintenance free and self lubricating.
20 safety positions are located in each column and spaced 3" apart.
Automatic locks located in each post for extra safety. Feel confident in the lift you buy.
Hydraulic pump incorporates a fully regulated pressure relief system to prevent overload.
A metered flow control valve is built into hydraulic cylinders to control lowering speed in case of hose rupture. Safety
is always a priority.
Electric-hydraulic power unit is equipped with an American made 2 H.P. industrial grade motor.
All necessary installation hardware is included. So there's no delay in installing.
Truck and van adapters come standard. Many other manufacturers charge extra.
Wide or narrow selection - to maximize your shop space.
Standard Clear floor styles - The Clear floor style uses an overhead "Dual-Syncro" equalization system that maintains
equal lifting and provides unobstructed floor space. This allows technicians to easily move transmission jacks, tool
boxes, oil drains and other equipment underneath the vehicle.
True Single piece columns - For added strength and less fatigue under heavy load conditions. Asymmetric models
offer columns rotated at 30 degrees to maximize clearance when opening vehicle doors.
Unlike other brands, The cylinders do not extend out the top of the lift posts when the lift is fully raised. No need to
punch holes in your ceiling for added cylinder clearance.
ETL approved and ALI certified - Don't get a lift that isn't! Strict international safety and quality guidelines are not only
met, but exceeded in many cases.
| "I'm a construction engineer and I know a good product when I see one. The Two Post Lift we purchased is an exceptional lift and really stands up to our abuse. Your service has been excellent and we are extremely satisfied with every aspect of doing business with your company." - Jim McConnell Cedar City, UT |
| XPR12FD Heavy Truck 12,000 lb floor plate lifts, Two post truck lifts |
| CLICK HERE For some must-have accessories |
| OPTIONS / ACCESSORIES - |
Air / Electric Work Station
Includes filter / lubricator / regulator that mounts directly
and easily on any column. Air and electrical outlets
provides remote access close to where you need it.
Price - $225
Includes filter / lubricator / regulator that mounts directly
and easily on any column. Air and electrical outlets
provides remote access close to where you need it.
Price - $225
| "My two post Lift is flawless! We installed it ourselves and use it day in and day out for months now. It's perfect!" - Mike Goldman Desert Drivetrane Fort Mohave, AZ |
| ALI & ETL Certified |
Beware other manufacturers out there that claim their lifts meet ANSI standards,
and then tell you how they had an independent lab test them. The labs were hired
directly by the manufacturer. That's like putting the fox in charge of the hen house!
All the top lift manufacturer's automotive lifts are tested and certified by ALI and
ETL. Whether you get a Bend-Pak lift or not, make sure you only get a lift that has
been tested and certified by ALI and ETL. The recognized industry body for testing
and certification.
CLICK HERE for more info about who ALI is and the standards they require
and then tell you how they had an independent lab test them. The labs were hired
directly by the manufacturer. That's like putting the fox in charge of the hen house!
All the top lift manufacturer's automotive lifts are tested and certified by ALI and
ETL. Whether you get a Bend-Pak lift or not, make sure you only get a lift that has
been tested and certified by ALI and ETL. The recognized industry body for testing
and certification.
CLICK HERE for more info about who ALI is and the standards they require
| Model XPR-12FD Truck Lift is ALI Certified |
| Look for the ALI / ETL Logo next to any certified Lift |
| HEAVY DUTY LIFT SALE Scroll Down for prices! |
| BLOW OUT LIFT SALE! |
| WARNING! - There's a distributor out there that carries these lifts at a lower price. - Until you factor in their inflated shipping charge. Another thing to beware of is the glut of lift distributors and manufacturers with "America" in their name. Some do this in hopes that you will assume the lift is made in the USA when it may not be. Just ask them where their lifts are made. Some also try the old bait and switch trick. They advertise a foreign bargain lift next to their more expensive ALI approved, USA made lifts hoping that you don't notice the difference. Don't be fooled by these tactics. We will never try to deceive you like this. |
| BRAND NEW - These Brand New XPR models by Bend-Pak are fresh off the assembly line and packed with improved features |
| Get the best for less at - Automotive Service Equipment www.asedeals.com Don't wait - we can't call you - Contact us now! |
| S&H FREE to a business address in the continental US (lower 48). Customer responsible for unloading from delivery truck on truck freight shipments. Add $40 if shipping to a residence (truck freight shipments only). CT residents, add state sales tax. Please see our TERMS page for terms and conditions. |
| Click on the link above to view Bend Pak lifts at Jay Leno's Garage .com |
| Strongly Recommended - A Must Read for anybody placing a vehicle on a two post lift. ALI has put out a video instructing lift safety practices. Hosted by racing legends Richard & Kyle Petty, this 24-minute DVD is based on the ALI Safety Manual; includes safety manual, safety tips card, written test, and answer key. They also have a manual that instructs user where proper jacking points are on most vehicles. |
| Click on the images above to view larger picture |
XPR SERIES - EXTRA POWER / EXTREME PERFORMANCE / RUGGED
BendPak's newest line of XPR-Series two-post lifts, offer a wide selection of durable, safe and reliable systems for virtually every
lifting application. Powerful and safe, BendPak's XPR-Series lifts offer incredibly rapid lift speeds, with plenty of features to
increase efficiency and productivity and with fewer serviceable parts and less necessary maintenance, the results are lower operating
expenses and higher productivity. These rugged lift models easily have the capacity to safely lift your largest full-size pick-ups and
commercial vehicles yet still provide specific lifting capability for sport and compact vehicles, both foreign and domestic. You'll find
the new XPR-Series lifts are the perfect addition to your shop if you're looking to make more money in less time than ever before.
The XPR-Series is a reflection of BendPak's continuing commitment to producing lifts of only the highest value, maximum safety and
utmost reliability. Featuring the most advanced engineered technology available in the industry, these lifts are built to provide
engineered safety factors for safe operation well above normal OSHA/ALI/ETL requirements. The XPR-Series includes a wealth of
standard and optional features to benefit the operator's need for performance and safety. Combined with BendPak's tradition of
rugged, reliable construction, the XPR-Series has become the new industry benchmark others are surely to follow.
Whatever your requirements, there's a BendPak XPR-Series two-post lift designed to meet your needs. The XPR-Series offer an
abundant menu of options, and accessories that allows you to fully tailor your lift to your specific needs. But long before you start
looking at options, you'll be impressed with the long list of standard features and capabilities packed into every BendPak XPR-Series
lift.
XPR SERIES - SUPER-DUTY MODELS
These Super-Duty models are the brutes among our two-post lineup - heavy-duty lifts designed for serious lifting. These Super-
Duty lifts with capacities up to 18,000-pounds were redesigned for 2008 and feature heavier column and carriage construction with
stronger frame components.
Just because these Super Duty models were designed for the big stuff doesn't mean they can't handle your light-duty work as well.
Full-reach arms that collapse to standard lengths and lower lift pads clutch standard passenger vehicles yet still accommodate
commercial and fleet vehicles. We purposely placed the columns wider for vehicles with fixed towing mirrors and designed the
overhead equalization beam up out of the way to accommodate “high cube" delivery vans. These advanced, state-of-the-art super-
duty models also feature dual direct-drive low-pressure cylinders, maintenance-free UHMW load bearings, single-piece columns,
extra-tall lifting carriages and oversize cable sheaves.
WITH EVERY XPR SERIES LIFT YOU GET -
Clear-floor Convenience - Our clear-floor models provide unobstructed floor space allowing technicians to easily move toolboxes,
transmission jacks, oil drains and other equipment underneath the elevated vehicle.
30-Degree Rotated Columns - Our asymmetric models, (XPR-10AC, XPR-10ACX) feature rotated columns for added clearance
when opening vehicle doors. Swing-away arms provide greater drive-thru clearance.
Two-Lifts-In-One - Our asymmetric models, (XPR-10AC, XPR-10ACX) also feature our exclusive Tru-Metric arm design that
provides variable arm-position configurations, either symmetric or asymmetric. This exclusive Tru-Metric design feature provides
greater versatility for greater service capability. It's like having two lifts in one!
Triple Telescoping Arms - (Models: XPR-12FD, XPR-12C) Three-stage front and three-stage rear arms provides maximum reach
as well as minimum retraction enabling you to use this super-duty lift system for raising standard passenger vehicles and light-duty
trucks.
Free Truck and Van Adapters - Others charge extra for these necessary adapters but they're standard with every XPR-Series lift.
Ideal for trucks and vans with running boards or auxiliary fuel tanks.
Lowered Arm Tube Supports - To minimize the chance of damaging vehicles with low hanging vehicle doors, we completely
redesigned our arm tube supports to allow for better clearance.
Automatic Arm Restraints - Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised.
When the lift is lowered, the gear type arm restraints automatically disengage to provide easy positioning of the lift arms.
Taller Lift Carriages - Take a close look at our lift carriages (the lifting assembly that the arms are attached to) then take a look at
the competition. You'll notice our 53" tall carriages are considerably taller than most which minimizes the stress placed on the load
bearings and columns.
Maintenance-Free Load Bearings - Rather than using roller bearings that need to be constantly lubricated, every XPR-Series lift
carriage uses futuristic UHMW ultra-high molecular weight polyethylene load bearings that never need lubrication and last virtually
the life of the lift.
Single-Piece Columns - We purposely manufacture the columns using single-piece construction for added strength and less fatigue
under heavy load conditions.
A column extension option (clear-floor models) gives you the flexibility of increasing the overhead clearance to maximize the
vehicles you can service.
Wide or Narrow Selection - Wide or narrow designs are available allowing you to maximize use of your floor space.
Dual Direct-Drive Technology - By utilizing two low-pressure HVLP Direct-Drive cylinders, we've eliminated the need for lifting
chains or screw mechanisms most commonly found on other lift designs. HVLP Direct-Drive technology offers better reliability,
smoother operation and less maintenance. High volume, low-pressure means less workload is placed on the entire hydraulic system.
Single-Point Safety Release - The single point safety release and dead-man style operation controls makes every one of our XPR-
Series lifts easy to operate and safe to use.
On-The-Level - Our Dual-Synchro equalization system maintains equal lifting and provides operators with a stable, level-vehicle
working condition.
Auto Shut-Off - A rigid, padded safety shut-off bar automatically stops the lift should a vehicle come in contact with overhead
structure.
Industrial-Grade Hydraulic Cylinders - Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined
steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates
any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground & polished C-1045/50 micro-alloy steel and
plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. Specially designed, high durometer,
mechanically loaded rod seals virtually eliminate rod seal leakage and a specially formulated abrasion resistant urethane rod wiper
provides exclusion protection. The welded cylinder body is made from high yield-strength steel tubing produced to exceed ASTM
specifications. This combination of superb base material and superior processing ensures straight, smooth and long duty life cylinders.
High-Speed Hydraulics - Free-flow, high-pressure 3/8" hydraulic lines and a high-flow pump and integrated AC power-unit
increase ascent and descent speed rates for increased productivity.
Durable Powder Coat Finish - All XPR-Series lifts feature a durable powder coat finish that gives the metal a high-quality,
extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that
claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected then sandblasted. After,
the parts are washed in our five-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately
dried, to avoid rust production then outgassed. Outgassing is a process we take pride in which pre-bakes the parts in a curing oven,
reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the
metal may bubble during the curing process and most likely cause chips in the powder. After the parts are washed and outgassed, any
surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs.
Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints then hung on an electrostatically grounded
conveyor line. The powder is then applied using an electrostatic spray gun. The powder “sticks" to the parts similar to how dust
sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for
15 for 45 minutes.
Detailed Safety Instruction - Included with every lift are detailed installation and maintenance instructions, graphic safety and
maintenance decals, and a vehicle lifting point guide and safety instruction placard that helps train personnel on proper safety and
maintenance guidelines.
BendPak's newest line of XPR-Series two-post lifts, offer a wide selection of durable, safe and reliable systems for virtually every
lifting application. Powerful and safe, BendPak's XPR-Series lifts offer incredibly rapid lift speeds, with plenty of features to
increase efficiency and productivity and with fewer serviceable parts and less necessary maintenance, the results are lower operating
expenses and higher productivity. These rugged lift models easily have the capacity to safely lift your largest full-size pick-ups and
commercial vehicles yet still provide specific lifting capability for sport and compact vehicles, both foreign and domestic. You'll find
the new XPR-Series lifts are the perfect addition to your shop if you're looking to make more money in less time than ever before.
The XPR-Series is a reflection of BendPak's continuing commitment to producing lifts of only the highest value, maximum safety and
utmost reliability. Featuring the most advanced engineered technology available in the industry, these lifts are built to provide
engineered safety factors for safe operation well above normal OSHA/ALI/ETL requirements. The XPR-Series includes a wealth of
standard and optional features to benefit the operator's need for performance and safety. Combined with BendPak's tradition of
rugged, reliable construction, the XPR-Series has become the new industry benchmark others are surely to follow.
Whatever your requirements, there's a BendPak XPR-Series two-post lift designed to meet your needs. The XPR-Series offer an
abundant menu of options, and accessories that allows you to fully tailor your lift to your specific needs. But long before you start
looking at options, you'll be impressed with the long list of standard features and capabilities packed into every BendPak XPR-Series
lift.
XPR SERIES - SUPER-DUTY MODELS
These Super-Duty models are the brutes among our two-post lineup - heavy-duty lifts designed for serious lifting. These Super-
Duty lifts with capacities up to 18,000-pounds were redesigned for 2008 and feature heavier column and carriage construction with
stronger frame components.
Just because these Super Duty models were designed for the big stuff doesn't mean they can't handle your light-duty work as well.
Full-reach arms that collapse to standard lengths and lower lift pads clutch standard passenger vehicles yet still accommodate
commercial and fleet vehicles. We purposely placed the columns wider for vehicles with fixed towing mirrors and designed the
overhead equalization beam up out of the way to accommodate “high cube" delivery vans. These advanced, state-of-the-art super-
duty models also feature dual direct-drive low-pressure cylinders, maintenance-free UHMW load bearings, single-piece columns,
extra-tall lifting carriages and oversize cable sheaves.
WITH EVERY XPR SERIES LIFT YOU GET -
Clear-floor Convenience - Our clear-floor models provide unobstructed floor space allowing technicians to easily move toolboxes,
transmission jacks, oil drains and other equipment underneath the elevated vehicle.
30-Degree Rotated Columns - Our asymmetric models, (XPR-10AC, XPR-10ACX) feature rotated columns for added clearance
when opening vehicle doors. Swing-away arms provide greater drive-thru clearance.
Two-Lifts-In-One - Our asymmetric models, (XPR-10AC, XPR-10ACX) also feature our exclusive Tru-Metric arm design that
provides variable arm-position configurations, either symmetric or asymmetric. This exclusive Tru-Metric design feature provides
greater versatility for greater service capability. It's like having two lifts in one!
Triple Telescoping Arms - (Models: XPR-12FD, XPR-12C) Three-stage front and three-stage rear arms provides maximum reach
as well as minimum retraction enabling you to use this super-duty lift system for raising standard passenger vehicles and light-duty
trucks.
Free Truck and Van Adapters - Others charge extra for these necessary adapters but they're standard with every XPR-Series lift.
Ideal for trucks and vans with running boards or auxiliary fuel tanks.
Lowered Arm Tube Supports - To minimize the chance of damaging vehicles with low hanging vehicle doors, we completely
redesigned our arm tube supports to allow for better clearance.
Automatic Arm Restraints - Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised.
When the lift is lowered, the gear type arm restraints automatically disengage to provide easy positioning of the lift arms.
Taller Lift Carriages - Take a close look at our lift carriages (the lifting assembly that the arms are attached to) then take a look at
the competition. You'll notice our 53" tall carriages are considerably taller than most which minimizes the stress placed on the load
bearings and columns.
Maintenance-Free Load Bearings - Rather than using roller bearings that need to be constantly lubricated, every XPR-Series lift
carriage uses futuristic UHMW ultra-high molecular weight polyethylene load bearings that never need lubrication and last virtually
the life of the lift.
Single-Piece Columns - We purposely manufacture the columns using single-piece construction for added strength and less fatigue
under heavy load conditions.
A column extension option (clear-floor models) gives you the flexibility of increasing the overhead clearance to maximize the
vehicles you can service.
Wide or Narrow Selection - Wide or narrow designs are available allowing you to maximize use of your floor space.
Dual Direct-Drive Technology - By utilizing two low-pressure HVLP Direct-Drive cylinders, we've eliminated the need for lifting
chains or screw mechanisms most commonly found on other lift designs. HVLP Direct-Drive technology offers better reliability,
smoother operation and less maintenance. High volume, low-pressure means less workload is placed on the entire hydraulic system.
Single-Point Safety Release - The single point safety release and dead-man style operation controls makes every one of our XPR-
Series lifts easy to operate and safe to use.
On-The-Level - Our Dual-Synchro equalization system maintains equal lifting and provides operators with a stable, level-vehicle
working condition.
Auto Shut-Off - A rigid, padded safety shut-off bar automatically stops the lift should a vehicle come in contact with overhead
structure.
Industrial-Grade Hydraulic Cylinders - Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined
steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates
any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground & polished C-1045/50 micro-alloy steel and
plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. Specially designed, high durometer,
mechanically loaded rod seals virtually eliminate rod seal leakage and a specially formulated abrasion resistant urethane rod wiper
provides exclusion protection. The welded cylinder body is made from high yield-strength steel tubing produced to exceed ASTM
specifications. This combination of superb base material and superior processing ensures straight, smooth and long duty life cylinders.
High-Speed Hydraulics - Free-flow, high-pressure 3/8" hydraulic lines and a high-flow pump and integrated AC power-unit
increase ascent and descent speed rates for increased productivity.
Durable Powder Coat Finish - All XPR-Series lifts feature a durable powder coat finish that gives the metal a high-quality,
extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that
claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected then sandblasted. After,
the parts are washed in our five-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately
dried, to avoid rust production then outgassed. Outgassing is a process we take pride in which pre-bakes the parts in a curing oven,
reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the
metal may bubble during the curing process and most likely cause chips in the powder. After the parts are washed and outgassed, any
surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs.
Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints then hung on an electrostatically grounded
conveyor line. The powder is then applied using an electrostatic spray gun. The powder “sticks" to the parts similar to how dust
sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for
15 for 45 minutes.
Detailed Safety Instruction - Included with every lift are detailed installation and maintenance instructions, graphic safety and
maintenance decals, and a vehicle lifting point guide and safety instruction placard that helps train personnel on proper safety and
maintenance guidelines.
Features
12,000-pound lifting capacity
Open-top eliminates overhead obstruction
Wide or narrow configuration
Single-piece columns
Single point safety release
Drop-end arms provide a lower pad height
Triple-telescoping arms provide increased range for
lifting point access
Dual hydraulic "Direct-Drive" cylinders
Oversize 53" tall carriage for superior strength and
durability
Electric/hydraulic power system
Large, 25" x 22" steel base plates
Self-lubricating dura-glide polyethylene bearing system
Safety locks in each column spaced every 3-inches
Automatic arm restraints
Heavy-duty dual 1/2" equalizer cables with oversize
cable sheaves
Truck and van adapters standard
ETL Approved (Pending)
View Floorplan / Dimensional Drawing
View Manual
12,000-pound lifting capacity
Open-top eliminates overhead obstruction
Wide or narrow configuration
Single-piece columns
Single point safety release
Drop-end arms provide a lower pad height
Triple-telescoping arms provide increased range for
lifting point access
Dual hydraulic "Direct-Drive" cylinders
Oversize 53" tall carriage for superior strength and
durability
Electric/hydraulic power system
Large, 25" x 22" steel base plates
Self-lubricating dura-glide polyethylene bearing system
Safety locks in each column spaced every 3-inches
Automatic arm restraints
Heavy-duty dual 1/2" equalizer cables with oversize
cable sheaves
Truck and van adapters standard
ETL Approved (Pending)
View Floorplan / Dimensional Drawing
View Manual
Specifications
Lifting Capacity* 12,000 Lbs.
*Max Capacity / Front Axle 6,000 lbs.
*Min Capacity / Rear Axle 6,000 lbs.
Height Overall: 144"
Width Overall (Outside of Base Plate): 155"
Width (Outside of Columns): 146"
Floorplate Cover Height: 2"
Width Between Columns: 118"
Reach (Front Arm Min.): 32"
Reach (Front Arm Max.): 60"
Reach (Rear Arm Min.): 32"
Reach (Rear Arm Max.): 60"
Min. Pad Height: 5"
Rise: 69"
Max Lift Height (Pad Only): 74"
Max Lift Height (6" Adapter): 80"
Drive-Thru Clearance: 103"
Motor (*): 220 VAC / 60 Hz. 1Ph.
Time of full Rise: 55 Seconds
Max Load per Arm: 3,000Lbs.
Shipping Dimensions (L x W X H) - 151"x 29" x 54"
Shipping Weight - 2,761 Lbs.
* Special voltages available upon request.
The design, material and specifications are subject to
change without notice.
Lifting Capacity* 12,000 Lbs.
*Max Capacity / Front Axle 6,000 lbs.
*Min Capacity / Rear Axle 6,000 lbs.
Height Overall: 144"
Width Overall (Outside of Base Plate): 155"
Width (Outside of Columns): 146"
Floorplate Cover Height: 2"
Width Between Columns: 118"
Reach (Front Arm Min.): 32"
Reach (Front Arm Max.): 60"
Reach (Rear Arm Min.): 32"
Reach (Rear Arm Max.): 60"
Min. Pad Height: 5"
Rise: 69"
Max Lift Height (Pad Only): 74"
Max Lift Height (6" Adapter): 80"
Drive-Thru Clearance: 103"
Motor (*): 220 VAC / 60 Hz. 1Ph.
Time of full Rise: 55 Seconds
Max Load per Arm: 3,000Lbs.
Shipping Dimensions (L x W X H) - 151"x 29" x 54"
Shipping Weight - 2,761 Lbs.
* Special voltages available upon request.
The design, material and specifications are subject to
change without notice.
BendPak - 40 YEARS AND COUNTING
We don't expect you to just take our word for it, we can show you first hand. But to see what it takes to be the best equipment
maker in the world, we have to take you on a journey. A journey below the surface to show you what you can't see on the shop
floor. Our lift building know-how and expertise, proven designs, use of only high grade materials and components, and our dedication
to craftsmanship are qualities you may not see on the surface, but what makes BendPak such an outstanding value. Over 40-years
ago we entered the market as a maker of quality service tools and equipment. Who would have guessed then where our devotion to
the customer would one day lead.
Today, BendPak is the world's leading producer of lifting systems, pipe-benders and air compressors with a corporate commitment
to be the best in the world. Our philosophy is to be the best at whatever you do, or get out of the business. At BendPak, the second
choice is not an option, as you can clearly see.
LOOK, COMPARE, DECIDE
Rugged, reliable lifts that deliver powerful performance you can depend on are the trademarks of BendPak's entire family of
above-ground lifts. Whether you're a professional mechanic who makes a living standing under lifts or simply an auto enthusiast
tinkering with cars on your free time, BendPak can provide just the right lift for the application, and the peace of mind knowing that
you're working under the best.
So why are BendPak lifts so special? What does BendPak do that the competitors don't? For starters, we begin with only
premium-grade materials and components and we use them in every lift we make. That means that our smaller models are built with
the same high quality materials, parts and craftsmanship found in our larger class systems.
A BendPak lift is built to last - our durable powder coat finish resists fading, cracking and blistering, our columns and integral lifting
components hold their shape and remain strong year after year. We continually test and retest our lifting systems at our product
development and engineering facility in Santa Paula, CA and verify standards conformity using ETL, UL, TUV, GOST, ANSI and
CE testing laboratories.
A COMMITMENT TO EXCELLENCE
No one in the industry has a more sophisticated and comprehensive research and quality control program. In fact, our competition
looks to us for innovation and ingenuity. Their best ideas began at BendPak but after all, like they say, imitation truly is the best
form of flattery. So while you may find designs, materials or features in our competitors' models strikingly similar, it was BendPak
that pioneered their use. We've been building lifts the right way, the best way, with the best materials and components, longer than
anyone else. That's why we lead, and they follow. From top to bottom, no lifting system has more quality, durability, or longevity
engineered into it than a BendPak. At BendPak, we start with the very best materials, and then we give you more.
We really shine when it comes to after-sale-support. We provide all of our customers with a specialized service program known as
Certified Service. Our fully staffed Customer Care Center (CCC) is available to meet all of your support needs, including highly
responsive technical support, one-on-one communication with account representatives and technical experts, electronic data
interchange (EDI), a highly-efficient logistics support chain, automated dispatch and communications system and a tightly integrated
system that allows incident management, trouble-shooting and reporting to be provided to customers seamlessly, regardless of
location.
We don't expect you to just take our word for it, we can show you first hand. But to see what it takes to be the best equipment
maker in the world, we have to take you on a journey. A journey below the surface to show you what you can't see on the shop
floor. Our lift building know-how and expertise, proven designs, use of only high grade materials and components, and our dedication
to craftsmanship are qualities you may not see on the surface, but what makes BendPak such an outstanding value. Over 40-years
ago we entered the market as a maker of quality service tools and equipment. Who would have guessed then where our devotion to
the customer would one day lead.
Today, BendPak is the world's leading producer of lifting systems, pipe-benders and air compressors with a corporate commitment
to be the best in the world. Our philosophy is to be the best at whatever you do, or get out of the business. At BendPak, the second
choice is not an option, as you can clearly see.
LOOK, COMPARE, DECIDE
Rugged, reliable lifts that deliver powerful performance you can depend on are the trademarks of BendPak's entire family of
above-ground lifts. Whether you're a professional mechanic who makes a living standing under lifts or simply an auto enthusiast
tinkering with cars on your free time, BendPak can provide just the right lift for the application, and the peace of mind knowing that
you're working under the best.
So why are BendPak lifts so special? What does BendPak do that the competitors don't? For starters, we begin with only
premium-grade materials and components and we use them in every lift we make. That means that our smaller models are built with
the same high quality materials, parts and craftsmanship found in our larger class systems.
A BendPak lift is built to last - our durable powder coat finish resists fading, cracking and blistering, our columns and integral lifting
components hold their shape and remain strong year after year. We continually test and retest our lifting systems at our product
development and engineering facility in Santa Paula, CA and verify standards conformity using ETL, UL, TUV, GOST, ANSI and
CE testing laboratories.
A COMMITMENT TO EXCELLENCE
No one in the industry has a more sophisticated and comprehensive research and quality control program. In fact, our competition
looks to us for innovation and ingenuity. Their best ideas began at BendPak but after all, like they say, imitation truly is the best
form of flattery. So while you may find designs, materials or features in our competitors' models strikingly similar, it was BendPak
that pioneered their use. We've been building lifts the right way, the best way, with the best materials and components, longer than
anyone else. That's why we lead, and they follow. From top to bottom, no lifting system has more quality, durability, or longevity
engineered into it than a BendPak. At BendPak, we start with the very best materials, and then we give you more.
We really shine when it comes to after-sale-support. We provide all of our customers with a specialized service program known as
Certified Service. Our fully staffed Customer Care Center (CCC) is available to meet all of your support needs, including highly
responsive technical support, one-on-one communication with account representatives and technical experts, electronic data
interchange (EDI), a highly-efficient logistics support chain, automated dispatch and communications system and a tightly integrated
system that allows incident management, trouble-shooting and reporting to be provided to customers seamlessly, regardless of
location.
| Now with triple telescoping arms! |
To start saving money
and increase your shop's profits -
CONTACT US NOW!
Automotive Service Equipment
Get the best - for less!
CLICK HERE TO PLACE ORDER, TO REQUEST A
CATALOG OR MORE INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL: contact@asedeals.com
and increase your shop's profits -
CONTACT US NOW!
Automotive Service Equipment
Get the best - for less!
CLICK HERE TO PLACE ORDER, TO REQUEST A
CATALOG OR MORE INFORMATION
Phone: 800-229-6218 or 860-626-9633
Fax: 419-831-0245
CLICK HERE TO EMAIL: contact@asedeals.com
| " EXCLUSIVE: ONLY FOR THOSE WHO WANT TO SAVE SOME SERIOU$ MONEY! " - CLICK HERE TO RECEIVE MONTHLY EMAILS OF OUR SPECIAL DEALS! or just give us your feedback Our monthly special deals are available exclusively to subscribers! Don't miss out - sign up now! Your email address will be kept confidential and you won't recieve mass emailings from us. |
| * - See our TERMS page for terms and conditions. |