Atlas OHX-10X Extra Wide Extra Tall Two Post Lift

In stock
SKU
ATEATTD-OHX10000X
Our Price $4,249.00 Regular Price $5,060.00

Atlas OHX-10X Extra Wide Extra Tall Two Post Lift 
10,000 lbs. Capacity 
The Atlas OHX-10X two post commercial grade above ground lift is the perfect choice for those large commercial repair facilities or home hobbyist DIY'er who demands the highest quality at the absolute best price.

CALL OUR EXPERTS NOW FOR UNBEATABLE, EXCLUSIVE PRICING!

Description

Atlas Automotive Equipment

Atlas OHX-10X Extra Wide Extra Tall Two Post Lift
10,000 lbs. Capacity

The Atlas OHX-10X two post commercial grade above ground lift is the perfect choice for those large commercial repair facilities or The Mr. Homeowner who demands the highest quality at the absolute best price. The Atlas OHX-10X is a TRUE 10,000 lb. capacity two post lift that offers a great value to the customer. The Atlas OHX-10X was engineered and manufactured to lift vehicles ranging from Smart Cars to a one ton diesel dually. Extra lifting height and extra width between the columns allows the operator to work on all sizes of vehicles and offers a "fudge factor" of about 6 inches when "driving through" to another part of the building or lifting the van or "ladder truck". If you are over 6'2", the Atlas OHX-10X has longer cylinders which allow the vehicle to be "lifted" about 3 inches higher than many other lifts.

The Atlas OHX-10X incorporates a single piece 12' 7" formed column and an extra long carriage that provides maximum column and arm strength to lift and support a 10,000 lb. vehicle. The single piece columns require the customer to have a ceiling of at least 13 feet to stand the column.

A solid column coupled with the longer carriage offers unparalleled structural support for all types of lifting requirements.

Automatic Arm Restraints: Automatic arm restraints are needed to keep the arm "locked" into a position relative to the carriage. When the arms are at rest in the lowest position, the arm restraint pin (which extends below the carriage) is pressed up and the lock (teeth) mechanism is disengaged.

The operator can then move the arms so that the lift pads can be properly positioned under the vehicle's lift points. Once the carriage is raised (approximately 2 inches) the lock is reengaged and the arms cannot be moved. However, the operator may pull the knob or metal ring to manually unlock the arms. Lock restraints do not guarantee that a vehicle cannot be "moved" off of the lift pads. Operator should use care when working on vehicles that have an abundant amount of undercoating (lift pads may "slide") or a significant weight imbalance of the vehicle may occur due to removal of an engine or transmission. Also, "HEAVY wrenching" may result in a vehicle shifting weight on the arm pads. We recommend the use of tall jack stands under the vehicle to add another layer of safety.

12 Piece Truck Adapter: This lift comes standard with a twelve piece truck adapter set. The twelve piece truck adapter set offers many more lift height combinations than standard two piece truck adapter sets.

Single Point Lock Release: This Atlas Lift has a manual single point lock release that allows the operator to release all the safety locks at one time. The spring loaded lock handle and power unit dump valve must be activated at the same time. (two hand operation) If the lock handle is released and the dump valve handle is still being pressed, the lift will continue to descend and all locks will automatically re-engage at the next lower lock point.

Free Tool Tray Included: This lift comes with a free tool tray that fits into the arm assembly. Perfect for conveniently storing important tools, lug nuts, or screws that may get misplaced or kicked across the floor during vehicle maintenance.

Features and Specs

Features
  • 10,000 lbs. Capacity
  • Commercial Grade
  • Extra Tall & Extra Wide
  • Overall Height: 152" (12' 8")
  • 2-Stage Symmetric Arms
  • Automatic Arm Restraints
  • "Padded" Shut-Off Bar
  • Rubber Covers on Carriages
  • Single Point Lock Release
  • Dual Direct-Drive Cylinders
  • Powder Coat Finish
  • Free 12 Piece Truck Adapter Set
  • Mounting Hardware Included
  • Shipping Weight: 1,680 lbs.
Specifications
  • Capacity: 10,000 lbs.
  • Overall Height: 152" (12' 8")
  • Overall Floor Width: 144 3/8" (12' 3/8")
  • Outside Columns: 136" (11' 4")
  • Inside Column Width: 118 1/4" (9' 10 1/4")
  • Drive Thru: 106 7/8"
  • Max Lift Height w/o Adapters: 76 3/8"
  • Max Lift height w/ Adapters: 85 3/8"
  • Minimum Arm Height: 3 1/2"
  • 2-Stage Arm Length: 52 3/8"
  • Column Size: 9 1/4" x 11"
  • Base of Column: 17 1/2" x 19 1/2"
  • Column Steel Thickness: 5mm
  • Arm Steel Thickness: 6mm
  • Motor: 220 Volt Single Phase
  • Electrical Requirement: 30 Amp Breaker Required
  • Oil Requirement: 3-5 Gallons AW32 or AW46 (NOT INCLUDED)
  • Adapter Heights: 4 Each 1.5", 2", 5"
  • Arm Hole/Adapter Peg Size: 1.5"
  • Shipping Weight: 1680 lbs.
  • Warranty: 5 Years Structure, 2 Years Hydraulic, 1 Year Power Units, No Labor

Requires a minimum of 4" of concrete with 3000 psi.
All lifts come with a step by step instruction manual.

Atlas 5-2 Warranty
5 Year Structural & 2 Year Hydraulic Warranty
This Atlas product is warranted for five (5) years on structural components, two (2) years on hydraulic cylinders, and one (1) year on electric or air / hydraulic power units from invoice date. Wear items are covered by a 90 day warranty.

This LIMITED warranty policy does not include a labor warranty.

NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO BE VALID.

The Manufacturer shall repair or replace at their option for this period those parts returned to the factory freight prepaid, which prove after inspection to be defective. This warranty will not apply unless the product is installed, used and maintained in accordance with the Manufacturers installation, operation and maintenance instructions.

This warranty applies to the ORIGINAL purchaser only, and is non-transferable. The warranty covers the products to be free of defects in material and workmanship but, does not cover normal maintenance or adjustments, damage or malfunction caused by: improper handling, installation, abuse, misuse, negligence, carelessness of operation or normal wear and tear. In addition, this warranty does not cover equipment when repairs or alterations have been made or attempted to the Manufacturer's products.

CE Tested and Approved CE Tested And Approved
The letters 'CE' appear on many products that are traded in the European Economic Area (EEA). There are 27 member states of the EU and European Free Trade Association. The CE marking attests the verification by a manufacturer that products meet EU safety requirements. It is the manufacturer’s responsibility to carry out the conformity assessment. Conformity assessment testing was performed by CCQS UK Ltd. www.ccqs.co.uk

This Atlas lift (structure and hydraulics) has been tested and has passed the CE conformity requirements. Atlas lifts sold in the USA and Canada use a different power unit than those required by CE. CE requires an electrical control box (with solenoids) that actuates the hydraulic power unit.

Electric power units supplied with above ground lifts in the USA and Canada do not require the electronic control box; therefore the power unit was not tested to CE approval requirements. If you have questions relating to the power unit supplied with your lift, please discuss these with your salesman.

If you are customer from the EU or other foreign county that requires CE approval, please contact our sales office to see how we can help.

Electrical Requirements
The electric motor for the power unit requires 220 Volt (single phase) 60 Hz (+/- 5%, so 209-231 volts). We recommend using at least a 10 gauge (grounded) wire from the electrical panel. The power unit may or may not have a short pigtail (no plug) that can be wired to either an optional quick disconnect box (mounted on the lift column) or to a male/female plug combination. A 30 amp breaker is required.

Overhead Configuration
The overhead bar configuration leaves the floor area between the columns open, and allows the operator to easily roll a transmission jack or a tool box under the car. The padded shut-off bar located below the cross beam prevents the top of the vehicle from being damaged by hitting the cross beam. The padded bar, which contacted automatically shuts off the motor on the power unit to prevent the vehicle from being lifted.

Accessories/Options

More Information

Reviews