BendPak XPR-10AS-168-LP Two Post Car Lift

In stock
Guaranteed Lowest Price $4,415.00 Regular Price $4,840.00
ALI Certified Automotive Lift

BendPak XPR-10AS-168-LP Extra Tall 168" Dual Width, Asymmetric Two Post Lift 10,000 lb. Capacity  LOW-PROFILE Arms
The BendPak XPR-10AS-168-LP two-post lift  features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak's XPR two-post models feature dual "direct-drive" low-pressure cylinders, maintenance free UHMW load bearings, single-piece columns, extra-tall lifting carriages. The "LP" Low-Pro™ model gives you all the low profile arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. Plus, it includes the infinitely adjustable screw pads, which allow you to adjust the pad height up to 2.5".



The BendPak XPR-10AS-168-LP is the most versatile two post car lift for sale. First, you get the same reliable direct-drive lifting method, the convenience of clear-floor design and smart asymmetrical rotated post system as is found on the standard XPR-10AS, but with an addition of 23” column extensions. Allow your auto shop the added capabilities of being able to handle sprinter vans, box trucks, trucks with ladder racks, and any taller vehicle. Beyond that, it also features the popular low profile arms, which allow you to reach low ground clearance sports car frame contact lifting points. Plus these arms stay at the low profile many inches beyond the frame pad, thus allowing you or your mechanic to get at those frame jacking points that are deeper within the body, and not not on the outer edge of the frame. The BendPak XPR-10AS-168-LP is the super-industrial-strength piece of vehicle lifting equipment that has it all: leading-edge technology, top-of-the-line materials, design that’s way ahead of its time and a 5-ton lifting capacity. Fits in shops with ceilings higher than 14’. The "LP" Low-Pro™ model gives you all the low profile arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. Plus, it now includes the screw pads, which allow you to infinitely adjust the pad height up to 2.5 inches.

Our newest line of XPR-Series 2-Post lifts offers a wide selection of durable, safe and reliable systems for virtually every lifting application. Specifically, the powerful and secure asymmetric XPR-10AS-168-LP is an incredibly rapid lift with a robust menu of features to increase efficiency and productivity, without overwhelming you with serviceable parts and necessary maintenance. The results are lower operating expenses and higher productivity. If you’re looking to make more money in less time than ever before, you’ll find that the new XPR-10AS-168-LP lift is the perfect addition to your shop.
Don’t get us wrong—we like to keep it simple at BendPak, but we definitely don’t dumb it down. Featuring a revolutionary 30° rotated column scheme for added door-opening clearance, the XPR-10AS-168-LP minimizes costly damage to customer vehicles and interior car access, even when it’s between the posts. Plus, the unique Tru-Metric carriage and arm design combine to give users the ability to load vehicles either symmetrically (centerline of vehicle at column) or asymmetrically (centerline of vehicle behind column). It’s completely up to you.

Tall, narrow fleet vans have been the rage in Europe for more than a decade and are just now becoming popular in the United States. Universally referred to as “Sprinters,” these aerodynamic and fuel-efficient vehicles captured 3.5% of the full-size van market in 2005. Four short years later, that number rose to almost 18%. Now, some estimates suggest it will reach as high as 23% before the end of the decade. Companies like FedEx, DHL and Microsoft already employ Sprinters for delivery and transportation services. Don’t they sound like the kinds of clients you’d like to have?

Here at BendPak, we believe the best way to get ahead is by thinking ahead. That’s why we’ve redesigned most of our two-post lifts to accept taller vehicles like the Sprinter. All of the extended height models in our XPR-Series can easily lift some of your largest full-sized pickups and commercial vehicles (including Sprinters), yet still provide specific capability for sport and compact cars, both foreign and domestic. The XPR-10AS-168-LP is a rugged, close-top model lift with a 10,000-lb. maximum lifting capacity. Sound complicated to operate? Don’t worry. When it comes to ease of use, our dual-synchro equalization system and user-friendly controls are the stuff of legend.

BendPak Logo

BendPak  XPR-10AS-168-LP 2-Post Automotive Lift | Asymmetric
The BendPak XPR-10AS-168 provides flexibility that most manufacturers don't offer. This 2 post hoist for sale offers the same features as our most popular XPR-10AS, but with an added 2 feet in column height. This feature allows you to raise taller sprinter vans, service vans and even pick up trucks with caps and ladder racks without having to worry about tripping the shut-off bar up above before you've reached the maximum lift height. These sprinter vans have become extremely popular in the last few years and will not be able to be raised completely on a standard height lift. If you want your technician to be able to service these popular vehicles, you better have one of these hoists. Be the only specialty auto shop in your area with the capability to service these vehicles. This will require a ceiling height of greater than 14 feet. Plus, it gives you the LP low profile arms to reach under low ground clearance sports cars.

The smart design of 30 degree rotated columns and asymmetric design means no more dings when your technician opens the automobile doors. Combined with premium features and leading technology and you've got a lift that is a leader in it's field. The BendPak Tru-Metric design means that you can not only position a vehicle asymmetric (center of auto behind columns), as well as symmetric (center of auto centered between columns). It truly gives you the best of both worlds. These features combine to increase not only safety, but also worker productivity.

The extra height that the BendPak XPR10AS-168 lift offers allows you to raise tall vehicles while standing up underneath. That's why BendPak is ahead of the competition. They're always innovating and offering features that the other guys don't. They offer probably the widest variety of lifts on the market. The BendPak XPR-10AS-168 is a premium direct drive, closed top model with a symmetric configuration and a 10,000 lb. capacity.

The XPR Series 2-post car lift is engineered for professional auto shops as well as the home hobbyist. It is comprised of features to make is safer, more reliable and more durable than the competition. They also made it more efficient, to increase your shop's productivity and reduce expenses and maintenance as you'll see if you continue scrolling down below. If you want a premium automobile lift at a reasonable price, the XPR lifts are for you.

These 2-post models are suitable for sports cars and compact cars as well as commercial vehicles and full size pick up trucks. Direct drive technology means that each lift carriage is raised directly by a low pressure hydraulic cylinder. This means less stress on the hydraulic system and a safer, more reliable design.

All BendPak clearfloor models utilze Large 5" diameter cable sheaves to help equalizer cables last longer. 16 load bearings mean less room for movement and less wear in the 53" tall carriage. You can set these models up at a wide or a narrow configuration. Special arm configurations are available too.

The XPR 2 post hoist for sale shows why BendPak is on top. They feature the highest quality components along with meeting the highest safety standards that go above and belong ALI and OSHA standards. No other manufacturer offers so much, for such a reasonable price. A wide array of optional accessories to make your lifting experience safer and easier are available. Of course, the standard features included with each model far surpass most of the competition.

Serious professionals have known for decades that when you purchase a BendPak car lift, you can count on longevity and reliability. The XPR line furnishes all the tools you need to get the job done on time and on budget. Their reputation for quality and safety are legendary. And they won't put a dent in your wallet.

Every XPR-10AS-168-LP comes with:

BendPak Asymmetric Rotated Columns
30° rotated columns The XPR-10A-168 features columns that are rotated at a 30 degree angle. This allows for even greater clearance when trying to enter or exit the vehicle after driving it through the columns.
Two Post Lift - True Metric Design
Two lifts in one -  The Tru-Metric design of the BendPak XPR-10A asymmetric models allows you to position the auto symmetric as well as asymmetric. It's like having two lifts in one., providing versatility beyond the typical lift.  

Direct-Drive two post car lift engineering - BendPak two-post lifts feature direct-drive low pressure cylinders removing the need for lifting chains or screw mechanisms you find on most common lift designs. Utilizing 2 HVLP low pressure hydraulic cylinders minimizes leaking and improves reliability. It also provides smoother operation and less costs for maintenance throughout the life of the hoist. High-volume, low pressure (HVLP) means less demand is placed on the system and that equates to less trouble down the road and greater longevity. There are less moving parts than a cylinder / chain lift and therefore less problems that can arise. The hydraulic oil flows from the pump through the cylinders, forcing the piston rod down and raising the lift carriage, along with the vehicle. A dual synchro cable equalizing system means that both sides will stay level and your technician stays safe.
 BendPak Two Post Lift Clearfloor Convenience

Clearfloor makes work easier - Having the equalizer cables and hydraulic lines pass along at the top of the columns means your floor is clear from obstructions. This allows you to roll tool boxes, oil drains and transmission jacks without worrying about having to careuly pass them over a floor plate.

Two Post Lift column Extensions
Extended column optional -  Allows an extra 2 feet of clearance up above to allow you to raise extra tall box trucks and sprinter vans without tripping the shut-off bar prematurely before you reach full lifting height.Gives you the flexibility of increasing the overhead clearance to maximize the vehicles you can service. This feature is standard on extra tall models.

 Single piece columns  - Single piece column construction means more structural integrity and strength, meaning less potential for failure when placed under heavy stress.

Wide or narrow configuration -  Don't have a lot of floor space - No problem. Just set the lift up at the narrow configuration. But if you do have plenty of room in your garage, we strongly recommend setting this lift up at the wide setting. It allows for much easier loading, opening of the doors, and working around the automobile.

2 Post Lift screw pads
Low profile frame screw pads  - allow you to get under most low profile sports cars that might be difficult to reach with most hoists. Can be adjusted infinitely up to 2.5" for the ultimate versatility.
Two Post Lift Truck Adapters
Truck and van adapters - Many manufacturers charge extra for these vital components. These extensions come in 63 mm. This allows you to get around fuel tanks and running boards to get at hard to reach frame jacking points.
Lift Lowered Arms
Automatic arm restraints - When you raise the vehicle, you want the arms to lock into place. The rugged design of the arm restraints means they won't fail you when you need it most. When you lower the car to the ground, they automatically disengage so that you can reposition the arms. 
Lift Carriage
Tall lift carriages  If you take a closer look, you'll find that the lifting carriage is a full 53 inches tall. Significantly taller than most competing brands. This greatly reduces the stress placed on the columns during the lifting process, and can greatly increase the life span of the working components as well.
Lift Load Bearings
Maintenance free load bearings - Some manufacturers use roller bearings that must be lubricated on a regular basis, and also cause significantly more wear on the inside of the column. The XPR lifts  use utilize a innovative UHMW (untra high molecular weight polythylene) load bearings that not only are guaranteed to last the life of the lift, but also will never need lubrication.

HVLP Cylinders  - Some manufacturers use high pressure cylinders which are less reliable and can leak much earlier. By using HVLP (high volume / low pressure) cylinders, the hydraulic system functions more efficiently and with less stress.
Lift Safety Release
Single-point safety release - No need to walk around the the other side to disengage the other safety. Single point safety release means that you can quickly release both safeties from one side, increasing your shop's productivity. Combine that with the dual synchro equalization system means that both columns stay synchronized and level during the lifting / lowering process.

Hydraulic Cylinders
Industrial grade hydraulic cylinders
  - This is where many manufacturers take shortcuts. Premium single piece hydraulic cylinders are machined to precision with a pilot fitted hardened steel piston which is wrapped with custom fitted piston seals wear bands and back ups, greatly reducing the potential for leakage. The chrome rod is forged micro smooth to provide years of dependable use beyond the typical cylinder with  a polished C-1045/50 finish, plated to .001" diametrically. Advanced rod seals and rod wiper construction means that abrasion and wear are diminished to a fraction of the competition. Base materials of this attention to detail means that your end product will supply years of reliable service beyond the typical mass produced cylinder.

Premium High speed hydraulics  - The AC motor powers a premium high flow pump which raises and lowers significantly quicker than other brands. This means your technician spends less time waiting and more time working.

Durable powder coat finish - The powder coating process used on the all XPR series lifts is superior to others in that it is a meticulous process that takes 10 steps to two-post-car-lift-powder-coated-tough.jpgcomplete. First, all components are inspected to ensure they are clean before being sandblasted. After sandblasting, all components are washed through 5 stages of huge phosphate tanks that can handle parts up to 25 feet long. Once cleaned, the parts are dried immediately to prevent rust. Then, the components are Outgassed, which is a process that pre-bakes the components in an oven to prep for coating. Many systems take a shortcut here. Doing that could cause problems with the final coat, including imperfections like chipping and bubbling, which is common on many inferior models. High temperature masking tape and silicone plugs are then used to cover any holes or components that need to be covered. Next, all components are given a thinner wipe to remove any possible prints or debris that could have occurred. After that, they are suspended on an electrostatically grounded conveyor line. and an electrostatic spray gun applies the powder. Finally, the parts are cured in 400 degree ovens for 3/4 of an hour.
All this leads to the most durable powder coat finish in the industry, capable of standing up to the most harsh environments and chemicals you can dish out.


Detailed Instruction Manual - These are Included as standard with every lift. They include maintenance as well as installation instructions. Also included are safety and maintenance decals, along with a lifting point guide for vehicles and a placard to inform personnel on proper maintenance and safety procedure.

Lift Literature

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Contact ASE for a complete list of BendPak Lifts that are ALI Certified.

 Why Should you purchase a Bend Pak lift from ASEdeals?
1) Guaranteed Lowest Prices - Listen, we monitor our competition's prices. We know we usually have the lowest price on most of our equipment most of the time. In the unlikely event you find any of our automotive lifts advertised anywhere on the web for less, just tell us where you saw them, and we'll beat them. It's that simple. Our prices will not be beaten!
2) Largest BendPak distributor -This means that you enjoy the benefit of our size. Not only does this allow us to offer the best pricing available, If you have any warranty issues that you feel are not being addressed quickly enough, or to your satisfaction, we have the influence with the manufacturer to get your issue resolved right away.
3) Years of Experience - So many internet companies have popped up over the past few years, claiming to have all kinds of experience, and then when you dig a little deeper, you'll find out that they've only been around for a few years. We've been carrying Bend Pak equipment for over 17 years now. When you call and speak to us, you're not getting just an order taker that knows nothing about the product. We know these products better than most. Not only will get you answers to your questions, we will make sure that you get the proper lift for your application.
4) Reputation - Right along with the years of experience comes our reputation. Check out our reputation on all of the various car enthusiast forums out there, such as Garage Journal or Corvette Forum. You'll find countless satisfied customers, praising not only our prices, but also our integrity, honesty and ability to help you choose the right product for your application. And then, there's our hundreds of satisfied customer pictures and testimonials to back it up. We'll gladly put our reputation up against anybody's.

Features and Specs

BENDPAK XPR-10AS-168-LP Two Post Lift | Low Profile Arm | Dual Width

  • Bolt-on 24" column extensions provide added overhead clearance
  • Lift arms shown with optional foot guards 10,000-lb lifting capacity
  • Expandable top beam accommodates wide or narrow drive-thru configuration
  • Telescoping Low-Pro™ arms accommodate lowered sports cars and those vehicles with lift points located on outer edges of the chassis
  • Padded overhead safety shutoff bar
  • Screw pads infinitely adjust up to 2.5"
  • Exclusive Tru-Metric arm design for more versatile arm positioning
  • 30° rotated single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Over-sized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4-piece truck and van adapter set standard
  • Versatile drop-in contact pads with stackable adapter
  • ETL approved.

    Lifting capacity*:10,000 lbs. / 4,536 kg
    • *Max capacity / front axle: 5,000 lbs. / 2,268 kg
    • *Max capacity / rear axle: 5,000 lbs. / 2,268 kg
    • Overall height: 169" / 4,267 mm
    • Overall width - NARROW CONFIG: 137" / 3,480 mm
    • Overall width - WIDE CONFIG: 145" / 3,683 mm
    • Width (outside of columns) - NARROW: 128" / 3,251 mm
    • Width (outside of columns) - WIDE: 141" / 3,581 mm
    • Floor to overhead switch*: 165" / 4,191 mm
    • Inside columns - NARROW: 99" / 2,515 mm
    • Inside columns - WIDE: 112" / 2,845 mm
    • Front arm min reach: 23-1/2" / 597 mm
    • Front arm max reach: 45-1/2" / 1,156 mm
    • Rear arm min reach: 42-1/2" / 1,079 mm
    • Rear arm max reach: 60" / 1,524 mm
    • Min pad height: 4" / 102 mm
    • Rise: 69" / 1,753 mm
    • Lift height max (pad only): 73" / 1,854 mm
    • Lift height max (6" adapter): 79" / 2,007 mm
    • Drive-thru clearance - NARROW: 89" / 2,261 mm
    • Drive-thru clearance - WIDE: 102" / 2,591 mm
    • Motor: 220 VAC / 60 Hz / 1 Ph
    • Time to full rise: 45 sec
    • Max load per arm: 2,500 lbs. / 1,134 kg



We found other products you might like!