ArchivesClearfloor | Car Lift Blog
Check out this sweet ride on our BendPak XPR9 two post lift. This picture was send in to us by a customer.
The customer is Susan Ashborn from Bristol, CT. She purchased this lift from us recently and send in some photos to us to show off her lift and her beautiful car. This is what people do. They like to share images for their pet project cars along with one of our car lifts.
The XPR-9 two post lift is a floorplate style hoist. Every two post lift has equalizer cables as well as hydraulic lines that must run across from one column to the other. They need to place them in one of two locations, either along the floor, under a plate of steel, (hence the term “Floorplate”) or at the top. When they run at the top, they are called clear floor lifts.
Clear floor lifts typically stand at about 12 feet tall, so you would need to have adequate ceiling height. If you don’t, you would need to get the floorplate model. The floor plate sysle lifts are made for shops with ceilings that are too low for the clear floor lifts. Most folks tend to prefer the clearfloor lifts provided they have enough ceiling height. They prefer a clearfloor model because the floor plate acts like a speed bump. It make it difficult to roll items across the floor underneath the lift. Things like transmission jacks, tool carts, oil drains, etc. are difficult to get over the plate. It still can be done. The plate is only 1.5″ high in most cases, and it is ramped up on each end. But it is more difficult. Another key difference is that the clearfloor 2 post lift has a shut off bar at the top. The switch gets activated when the roof of the car hits it. Of course, a floor plate model does not have a shut off bar at the top, so the user must monitor the vehicle as it’s being raised to make sure it doesn’t go into the ceiling above.
After this brief two post lift tutorial, you hopefully have a better understanding of the two different styles. There are many other factors involved in choosing a twio post lift. You can find them in other past posts on this blog.
Two Post Lifts are one of our most popular items we sell. One of the most popular accessories for a two post lift is an oil drain. After all, who wants to hold a bucket over their head when changing oil? That’s why it’s a perfect combination for us to throw in a free DO-8 oil drain along with the purchase of any Dannmar two post lift. Dannmar has several options in the two post lift category. They have clearfloor and floorplate lifts, as well as symmetric and asymmetric options. The free oil drain is the popular DO-8 oil drain. This drain is an 8 gallon reservoir on wheels with a long neck, and a funnel on top. It has a mesh screen to prevent things like the drain plug from falling down into the reservoir.
On top of that, we also have a great sale going on. We can’t tell you the sale prices here though. You’ll have to call us to find out what our current low prices are. But trust us, it will be worth your while. But be warned, This deal is only running until the end of March, so don’t wait.