ArchivesEngine Hoist | Car Lift Blog

New Heavy Truck Engine Hoist By AFF

May 7th, 2012

You’ll find many different engine hoists out there that are rated at 2 tons capacity or less. Probably 90 percent of them are. This one is not like those. The new 3584 shop crane by AFF is the right choice for shops that primarily service trucks. It’s rated at 3 tons capacity. Many shops need a hoist that can handle more weight than the traditional crane can.  Especially when you consider that the typical engine hoist capacity rating is when the boom is fully retracted. So if you consider that a two ton capacity engine hoist is actually only rated at perhaps only 500 lbs. when the boom is fully extended, you see why you need a heavier capacity hoist for those larger trucks. Especially since you need to extend the boom out more to reach farther on them.  So go ahead and take those big jobs. With a shop crane like this, you’ll never have to turn away another job again. And because it’s made my American Forge & Foundry, you know it’s a high quality product, made for every day use. We have been carrying AFF products for over a decade, and we have the utmost confidence in them. They also have over 300 service centers nationwide, so warranty issues are not a problem. Plus, they are totally rebuild-able. Parts are always available.

AFF Engine Hoist

Engine Hoist Selection Is Not So Simple

November 20th, 2011

At first, choosing an engine hoist may seem like a simple task. Most people think they’re all pretty much the same. But as you’ll soon see, there are many more facts to consider than you might realize.

The first and most important factor to consider is what capacity you need. Most engine cranes run from 1 ton up to 2 ton capacity. But there are shop cranes that rate at even higher capacities, some above 5 tons for heavy equipment engine lifting. Assuming to are the typical auto shop, you would be most likely to acquire a 2 ton model.

The next most important consideration is wether you should get a folding engine hoist or a nonfolding one. Many users prefer a folding crane because it allows you to utilize your floor space better. When it’s not in use, you can free up vital floor space that many smaller shops don’t have to spare.

You do sacrifice some key features when you get a folding engine lift. Cranes that fold usually don’t have the reach that a non-folding one has. That is because the non folding design allows for more boom to extend out as well as the legs. They can typically telescope out a foot longer than a folding hoist can. This could mean the difference when it comes to reaching into a larger truck’s engine compartment.

Safety considerations also apply. Users need to take care not to extend the boom out farther than the legs. This can lead to potential imbalance causing the hoist to flip. Always make sure the boom does not extend out past the legs.

You may want to get an engine tilter as well. This allows you to make fine adjustments when re-mounting the engine.

Don’t skimp when it comes to quality either. Get a solid, commercial quality engine hoist. Even if that cheap engine hoist doesn’t fail to a catastrophic ending, you face years of leaking cylinders and other potential issues with an inferior, bargain cherry picker.

Engine Hoist

Engine Hoist Choices

June 15th, 2011

An engine hoist is a vital piece of equipment for any auto shop. Of course, it is essential for lifting motors, but that’s not it’s only use. It can be used anytime you need to move any heavy item in your shop, or in your parking lot even.

Choosing an engine hoist can be complex. There are many considerations. The most important consideration is capacity. How much weight do you want it to raise? Most auto shop owners choose one with a lifting capacity of 2 tons. When a manufacturer rates the capacity of their shop crane, the capacity usually is rated when the boom is fully retracted. The capacity diminishes the further out the boom is extended.

Most engine hoists have swivel casters that allow you to roll them around, making them completely portable. A popular accessory for this product would be an engine tilter, which makes positioning of the engine easier.

Most shop owners purchase an engine lift that can be folded up. This allows them to store it away in the corner of the shop so it’s out of the way when it’s not being used. Typically, these folding cranes will not have quite as much reach as one that does not fold up, so there is still a strong following for non-folding models for this reason.

Engine Hoist