- Features & Specs
- More Info
An increased cabinet size and larger solution tank makes the RS-500 more versatile and productive. By using an octagonal full-opening door, we've enhanced access to the turntable to enhance the operator's loading capabilities. Simple operating controls, brass nozzles, a gasket-free door and a high-capacity 70-gpm pump demonstrates Ranger's commitment to enhanced performance and productivity without a single sacrifice in quality. Like all Ranger spray wash cabinets, the RS-500 is built to last. We constructed the cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and powder coat finish. All-around performance, durability and improved operator convenience make the RS-500 the definitive choice among professionals worldwide.
Movable filter basket Each component washer cabinet by Ranger includes a robust trap filter to secure large particles greater than 1/8". Filter basket is removable for unfettered access to the cleansing solution tank and easy maintenance.
Multi-directional sprayer Industrial-strength multi-directional spray jets are located below, above and on the sides to wash away set-in grime.
Steel oil skimming system Parts washers by Ranger include a stainless-steel oil skimmer that miraculously separates oil and grime from the water to increase the viable longevity of the detergent solution cleanser. Oil and other contaminants are directed via downspout into holding containers.
Fast-release door latch / gasket-free door Swift-release door latch is built-in for technician convenience. The gasket-free interlocking door keeps the cleanser material free from contaminants in the tank instead of on your floor.
Brass nozzles Instead of pipe-tree and drilled holes, Ranger parts washers include replaceable spray nozzles made of brass. These sprayer nozzles have a sharply articulated spray grid to give users a high-quality cleaning experience and great performance free from corrosion.
Durable turntable The system behind the parts washer turn table is friction-drive, helping to eliminate potential motor damage by reducing the risk of component jamming inside the cabinet.
Industrial casters and convenient tank drain. Heavy-duty rubber swivel casters provide sensible maneuverability. Ranger components washers include built-in pipe drains to eliminate sludge from the floor of the parts washer tank.
Safety switch and timer dial A door switch turns off the washing cycle when the door is opened, while a variable 60-minute timer allows for different wash cycle times to be set manually.
Removable tree rack and components basket The quick-mount parts tree rack and hanging component parts basket is ideal for the cleaning of smaller components. Use the parts tree and basket in conjunction with parts on the turntable and you’ll tackle more parts cleaning in less time. The center tree rack can be easily removed to provide additional clearance.
Extra accessories come standard All Ranger parts washers come with a removable parts rack, small parts basket and 25 pounds of detergent.
Commercial-grade pump / motor combination Every Ranger parts washer features an American made centrifugal pump specifically engineered for parts washing applications. The motor and pump are located at the rear of the cabinet and shrouded by a protective cover to prevent contamination.
Hot cleaning Fast heating is accomplished via a nickel based, alloy-sheathed, heater element specifically designed for heated parts washing applications
Thermostat Adjustable set point thermostat features a heating range of 135 to 175 Degrees Fahrenheit.
Double-pole circuit breaker The Eaton Cutler-Hammer 20/30 amp Quadplex Double-Pole Type BR Circuit Breaker features a 2-pole 20 amp breaker for the heater and a separate 2-pole 30 amp breaker for the motor and pump combination.
Aluma-Klean soap removes oil, stains and grease with ease Ranger’s Aluma-Klean spray-wash detergent is a mild parts cleaning soap designed to clean aluminum, stainless and other delicate parts without whitening the surface. Aluma-Klean parts cleaning soap is not a solvent, but rather a non-foaming, low pH, mild-alkali, water-soluble, powdered detergent especially formulated for high pressure heated parts washing systems. Incredible cleaning action removes grease, oil, baked on stains, carbon, protein and even some paints.
Features & Specs
- Heavy-duty steel construction
- Removable tank screen
- Stainless oil skimmer
- Removable parts tree
- Powder coat finish
- Brass nozzles
- Full opening octagonal door
- Large drain pipe
- Heavy-duty rubber casters
- Friction-drive turntable system
- Gasket-free door
- Small parts basket
- Stainless steel handles
- Removable parts tree
- Free bucket of soap included
- Overall height: 66" / 1,676 mm
- Inside height: 43" / 1,092 mm
- Inside width: 32" / 813 mm
- Turntable diameter: 30" / 762 mm
- Tank capacity: 50 gallons
- Recommended floor space: 44" x 43" / 1,118 mm x 1,092 mm
- Load capacity: 500 lbs. / 227 kg
- Cycle Timer: 0 - 60 minutes
- Brass Nozzles: 18
- Steel construction: 12 Gauge / .109 thickness
- Pump output: 75 psi @ 70 gpm
- Motor: 1 Hp / 220 VAC / 60 Hz / 1 Ph
- Electric heater: 6 kW
- Water Temperature: 0° - 190° F
- Shipping weight: 750 lbs. / 336 kg
- Shipping dimensions: 36" x 44" x 68" / 914 mm x 1,118 mm x 1,727 mm
Warranty - 5 years on cabinet, one year on pump and motor.
Ranger RS-500D Spray Wash Cabinet with Skimmer Reviews
Add your review