- Features & Specs
- More Info
The "PLUS" features for our commercial grade two stage air compressors includes an automatic low oil monitor, automatic tank drain, and air cooled aftercooler. These three feature help to extend the life of your Atlas air compressor while also delivering "better air".
Most shops do not have 3 phase electricity, and those that do, may not have the 3 phase outlets near where the compressor needs to be located. The Atlas AF9PLUS/17 is capable of providing adequate air for the medium to large shop owner.
The Atlas Air Force air compressors are powerful, belt driven reciprocating air compressors designed and built to offer years of trouble-free service. The Atlas Air Force shop compressor is built to the same exacting standards as the entire line of Atlas professional grade automotive equipment.
Air Cooled After Cooler: The after cooler reduces the temperature of the pressurized air before it enters the air tank of your Atlas Air Force air compressor. When the temperature of the compressed air is lowered, there is less moisture the tank and in the air being used from the tank. Moisture is the enemy of all air powered tools. The Air Cooled AfterCooler and the Automatic Tank Drain help to solve this problem.
Key Word: AUTOMATICALLY!
Auto Tank Drain: Although you promise yourself that you will drain your compressor once a week; you will not. The automatic tank drain removes the excess water from your air tank many times every day. Key Word: AUTOMATICALLY!
Low Oil Monitor: Do you wait for your oil light to glow on the dash of your automobile before you add or change oil? Did you promise yourself that you would check your air compressor’s oil level every month? The low oil monitor automatically “shuts down” your air compressor in the event that the oil in the compressor pump falls below a safe level.
Key word: AUTOMATICALLY!
Finned Tank Inlet Tube
Magnetic Starter: The Magnetic Starter is the "thinking cap" for the motor of the air compressor. Magnetic starters are electromagnetically operated switches that provide a safe method for certain motors to be started under a large motor load. The overload relay inside the magnetic starters will prevent the supply voltage from energizing the motor if the starter detects a motor overload situation. Heaters (in series) are responsible for allowing current to reach the motor (and start it) or prevent the current from reaching the motor (preventing a motor failure). Magnetic starters will allow a motor (when properly sized to the compressor pump) to operate at a 100% duty cycle. A heavy-duty pressure switch can also be used (with some motors) to mimic the actions of a magnetic starter.
Vibro-Isolation Pads: When the compressor “starts up”, there is a vibration created which puts a stress on the legs of the air tank. The pads absorb the vibration and prevent damage to the welment between the tank and the legs.
Features & SpecsFeatures
- FREE set of Vibro-Isolation pads
- 1725 RPM Motor
- Extremely quiet operation
- Mounted Magnetic Starter
- Finned tank inlet tube to reduce temperature of compressor air
- Heavy Duty Metal Belt Guard
- Air Cooled Aftercooler
- Auto Tank Drain
- Auto Low Oil Shut Off
- Motor Running: 7.5 Horsepower
- Delivered-CFM 100PSI: 24.8
- Delivered-CFM 175PSI: 22.8
- Pressure Setting: 145 lb. - 175 lb.
- Tank Capacity: 80 Gal.
- Air Outlet Size: 1/2" NPT
- Overall Dimensions: L 36-1/2" x W 24" x H 71"
- Motor Voltage: 230VAC 1PH 60 Hz 34-32AMPS
- Motor RPM: 1725 RPM
- Auto Tank Drain Voltage: 110V
- Compressor Pump: TK50 3 Cylinder 2 Stage
- Shipping Dimensions: 48" x 40" x 75"
- Shipping Weight: 627 lbs
Atlas AF9PLUS/17 Two Stage 7.5HP 80 Gallon Air Compressor Reviews
Add your review