Atlas RJ-35 Hydraulic Sliding Center Jack 3,500 lbs. Capacity
Atlas RJ-35 Hydraulic Sliding Center Jack 3,500 lbs. Capacity
with Truck Adapters
The Atlas RJ-35 (3,500 lbs. capacity) sliding hydraulic vehicle jack is designed for use on hobbyist lifts with no welded slide on runways. Glide blocks under extension ears allow the jack to be positioned under correct lifting point of vehicle.
CALL US NOW FOR AN EVEN BETTER DEAL!
Description
Atlas RJ-35 Hydraulic Sliding Center Jack 3,500 lbs. Capacity
with Truck Adapters
The Atlas RJ-35 (3500 lbs. capacity) sliding hydraulic vehicle jack is designed for use on hobbyist lifts with no welded slide on runways. Glide blocks under extension ears allow the jack to be positioned under correct lifting point of vehicle.
The Atlas RJ-35 (3500 lbs. capacity) sliding hydraulic vehicle jack is the perfect choice for the owner of the Atlas Garage Pro 8000. The Atlas RJ-35 Sliding Jack will also fit the Atlas Garage Pro 9000. The Atlas RJ-35 Sliding Jack is for those who want to perform wheel service on a vehicle that is positioned on top of their four post lift.
The complete Atlas Garage Pro 8000 four post lift comes with a jack tray. The jack tray has certain limitations that are eliminated by using the Atlas RJ-35 Sliding Jack. The jack tray (with a small floor jack or jack stands) will support ONLY THOSE LIFTING POINTS of the raised vehicle that are between the runways of the Atlas Garage Pro 8000 four post lift. The Atlas RJ-35 Sliding Jack has telescoping arms that can be extended over the runways of the four post lift. The lift pads at the end of these arms can be positioned under the LIFTING POINTS (that are located over the runways of the four post lift) of the vehicle allowing the operator to access many more LIFTING POINTS than just using the jack tray.
The Atlas RJ-35 Sliding Jack comes standard with a set of peg style truck adapters which increase the lifting height of the lift pads. These truck adapters will allow the Atlas RJ-35 Sliding Jack sliding hydraulic jack to raise pick up trucks that will sit higher on the runways than the average passenger car. The Atlas RJ-35 Sliding Jack is operated by a manual hydraulic pump (porta-power pump) and does not require an air compressor for power. The Atlas RJ-35 Sliding Jack sliding hydraulic jack also features two solid locking positions that are used when the vehicle is to be suspended above the runways. When the locking positions of the Atlas RJ-35 Sliding Jack are engaged, the hydraulic pressure from the lifting cylinder of the RJ-35 Sliding Jack is eliminated. (These locks act much like a pair of jack stands after you lift a vehicle off the ground with a service jack).
Finally, the versatile Atlas RJ-35 Sliding Jack is adjustable to fit between the runways of many of the other four post lifts that have been sold in the last several years.
Features and Specs
Features
- 3,500 lbs. Capacity
- Manually Operated
- Scissor Mechanism Allows For Level Lifting
- Compact Size With A Low Profile
- Adjustable Width Fits Most Four Post Lifts
- Safety Lock Positions
- Adapters Included
- Powder Coated Finish
- Commercial Grade
- Adapter Storage
Specifications
- Capacity: 3,500 lbs.
- Minimum Width: 29-1/2"
- Minimum Width with Arms In: 39-1/2"
- Maximum Width with Arms Out: 64-3/4"
- Minimum Height with Lift Pad: 3-1/2"
- Lifting Pad: 1-3/8"
- Short Adapter: 1-1/4"
- Tall Adapter: 5"
- Raised Height without Adapter: 11"
- Raised Height with Small Adapter: 12-1/4"
- Raised Height with Large Adapter: 16"
- Raised Height with Small and Large Adapter: 17-1/4"
- Shipping Dimensions: 10" x 22-5/8" x 37-3/8"
- Shipping Weight: 350 lbs.
1 Year Parts Warranty
Atlas tire changers, Atlas wheel balancers, Atlas air compressors, Atlas winches, 4 post lift jacks, Atlas brake lathes have a 1-Year Parts Warranty from the date of invoice.
NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO BE VALID.
The Manufacturer shall repair or replace at their option for this period those parts returned to the factory freight prepaid, which prove after inspection to be defective. This warranty will not apply unless the product is installed, used and maintained in accordance with the Manufacturers installation, operation and maintenance instructions.
This warranty applies to the ORIGINAL purchaser only, and is non-transferable. The warranty covers the products to be free of defects in material and workmanship but, does not cover normal maintenance or adjustments, damage or malfunction caused by: improper handling, installation, abuse, misuse, negligence, carelessness of operation or normal wear and tear. In addition, this warranty does not cover equipment when repairs or alterations have been made or attempted to the Manufacturer's products.
