CEMB ER100GT Diagnostic Wheel Balancer

In stock
SKU
ER100EVO
Our Price $15,688.00 Regular Price $16,667.00
CEMB ER100GT Diagnostic Wheel Balancer
Fastest Diagnostic Balancing Machine in the World

CEMB has improved their top-of-the-line wheel balancer. The ER100GT Diagnostic Wheel Balancer is even faster and more efficient. In just 6.4 seconds and without any manual intervention on behalf of the operator the machine automatically detects all wheel dimensions, unbalance, internal and external wheel and rim eccentricity, tread-depth and conicity. The ER100GT is a fully automatic balancer. In addition to automatic RFV Measurement, it boasts the unique capabilities of HubMatch, for better indexing the wheel assembly when mounting on the hub. The ER100GT has a Tread Depth analyzer built-in, and a true bare rim Eccentricity measurement device, for use in straightening bent rims.

Description

CEMB USA

CEMB ER100GT Diagnostic Wheel Balancer
Fastest Diagnostic Balancing Machine in the World

CEMB has improved their top-of-the-line wheel balancer. The ER100GT Diagnostic Wheel Balancer is even faster and more efficient. In just 6.4 seconds and without any manual intervention on behalf of the operator the machine automatically detects all wheel dimensions, unbalance, internal and external wheel and rim eccentricity, tread-depth and conicity. The ER100GT is a fully automatic balancer. In addition to automatic RFV Measurement, it boasts the unique capabilities of HubMatch, for better indexing the wheel assembly when mounting on the hub. The ER100GT has a Tread Depth analyzer built-in, and a true bare rim Eccentricity measurement device, for use in straightening bent rims.

  • 3D Laser Scan - Extraordinary accuracy and speed in 3D acquisition of wheel sizes with exact positioning of adhesive weights
  • External Laser Scan - Complete wheel diagnosis including tyre conicity and wear analysis in three different areas
  • Side Laser - Line laser indicator on the upper part of the wheel to ease the application of clip-on weights in the exact position
  • OPB One Plane Balancing - Correction of both static and dynamic unbalance on one plane at once and with only one weight
  • AutoAdaptive Mode - The new tolerance calculation system
  • HubMatch - During the measuring cycle, the wheel’s "maximum eccentricity point" is detected and displayed on monitor, therefore allowing for its reduction during the re-mounting of wheel on vehicle
  • Direct Matching - Visualization of the best possible matching to reduce eccentricity
  • ALU-S Balancing Mode - Adhesive weights on the internal rim planes with specific counterweight position indicator (position repeater)
  • Tire Set - The software indicates the best wheel positioning on the vehicle to get the best ride (conicity) and to minimize wheel vibrations (eccentricity)
  • Automatic Positioning Speed Doubled and instantaneous locking of the wheel at the point of weights application
  • Pneumatic Wheel Locking - Floor to floor time reduction / Extremely easy and quick to use / Very accurate wheel centering
  • Print Report with QR Code for quick export and immediate integration with workshop systems
Wheel Structure Analysis in just 6.4 Seconds
Very often wheel vibrations are not caused by unbalances, but by a structural (geometrical) deformity of the wheel itself. ER100 GT in a few seconds of a single spin displays unbalance and eccentricity of tire and rim. The operator will be alerted on the screen when the total eccentricity value exceeds the maximum tolerance admissible. Should the run-out value be out of tolerance, simply pressing a push-button the operator can visualize the best tire/rim mutual positioning to drive the total eccentricity value within tolerance. If the operator requires, during the same measuring cycle, ER100 GT can display also the values of conicity and tread-depth, detected through laser scan. The machine can also measure the eccentricity of the rim alone. A double scan on the two separate bead seating positions acknowledge the exact structure of the rim.

Ergonomic Design
The new CEMB ER100 GT wheel balancer has an attractive and modern design, while retaining the characteristics of the ErgoFast range. The ErgoFast line has been developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch screen are only but a few of the advantages developed for our end users.

3D Laser Scan - Extreme Measuring Precision and Faster Weight Application
  • Touchless wheel distance and diameter measuring system which, combined with the external radial laser for width measurement, detects with 3D precision the dimensions of any profile, even the most complex; no intervention of the operator.
  • Advanced technology that speeds up the dimensions reading process without penalizing reliability and precision.
  • Brighter laser pointer that grants an extreme accuracy during correction thanks to a clear indication of the application point for stick-on weights.
  • Greatest robustness for a long lasting usage. No moving parts are exposed, risks of damages are reduced.
  • Easy maintenance.
External Laser Scan
The external laser performs a complete wheel diagnosis including tyre conicity and wear analysis in three different areas.

Side Laser
Two laser beams indicate the exact 12 o’clock position to place clip-on weights. With these accurate reference points, any possibility of erratically placing counterweights is eliminated.

One Plane Balancing - Where Innovation Meets Simplicity
OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program. A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.

AutoAdaptive Mode - The New Tolerance Calculation System
The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration. For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.

HubMatch
HubMatch detects the unbalance as well as the highest point of the wheel (1st harmonics), and displays it on-screen to enable mounting of wheel on vehicle so that simply matching mechanical clearances when positioning the rim on the hub will eliminate the eccentricity.

New Automatic Positioning System
An electromagnetic brake has been added on the DC motor, resulting in a doubled speed during positioning and an immediate lock of the wheel.

Industry 4.0 Kit (Optional)
Industry 4.0 Kit allows a complete control of the workshop activity thanks to the possibility to plan the daily activity, by inserting the number of wheels, the start time of any activity and the machine that will be used to optimize the resources and eliminate waste of time. Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.

Features and Specs

Features

  • Fastest Diagnostics Balancing Machine in the World
  • Wheel Structure Analysis in just 6.4 Seconds
  • Ergonomic Design
  • New Automatic Positioning System
  • Virtual Drift Measurement
  • Tread Depth
  • Rim Bead Eccentricity
  • Direct Matching
  • Splash Guard
  • Electromagnetic Brake
  • Automatic Positioning
  • Touchscreen Monitor
  • 3D Laser Scan
  • External Laser Scan
  • Side Laser
  • Pneumatic Locking
  • One Plane Balancing
  • AutoAdaptive Mode
  • HubMatch
  • Made in Italy. Final assembly in USA.

Standard Accessories

  • SE Kit
    • Ring
    • Quick Locking Sleeve
    • SE Spacer
    • SE2 Spacer
  • 4 Cones Kit
    • 4 Cones 45 - 110mm
    • Pincer Hammer
    • 60g Counterweight

Optional Accessories

  • Industry 4.0 Kit
  • Zero Weight Wheel Lift
  • Printer

Specifications

  • Power Supply: 115V 1Ph 60Hz / 230V 1Ph 50Hz
  • Max. Absorbed Power: 0.15 kW
  • Balancing Speed: 100 rpm
  • Measuring Cycle for 33 lbs. (15 kg) Wheel: 4.7 s
  • Measurement Uncertainty: ± 0.5 g
  • Resolution: 0.5 g
  • Average Noise: < 70 dB (A)
  • Rim Width Setting Range: 1.5" - 20" (40 - 510mm)
  • Rim Diameter Setting Range: 10" - 30" (265 - 765 mm)
  • Min./Max. Compressed Air Pressure: ~ 105 - 145 psi | 7 - 10 Kg / cm2 | ~ 0.7 - 1 MPa | ~ 7 - 10 bar
  • Max. Wheel Weight: < 165 lbs. (75 kg)
  • Overall Dimensions: 61.8" H x 65.9" W x 53.5" D (1570 x 1675 x 1360 mm)
  • Machine Weight: 495 lbs. (220 kg)
  • Warranty: (2) Years on Parts, (1) Year Labor
CEMB Limited Warranty Statement
The BL Systems Co. (hereinafter "BL") warrants products manufactured and sold by it to be free from defects in material and workmanship for a period of 24 months parts, 60 months Wheel Balancer Motors, and 12 months labor from the date of installation, note: machine calibration is not a warranty item, except that parts sold from the repair or replacement of existing equipment will only be warranted for a period of 90 days from the date of installation.

If upon inspection by BL, any warranted product shall prove defective in materials or workmanship during the warranty period, that product shall be repaired or replaced at BL's option. BL must receive damaged part for full credit. Such repair or replacement shall be BL's sole obligation and the buyer's exclusive remedy under this warranty.

This warranty supersedes all prior oral or written agreements, promises, advertising or representations. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, AND BL EXPRESSLY DISCLAIMS AND EXCLUDES ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITMESS FOR A PARTICULAR PURPOSE. THESE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. BL's liability in contract, in tort (negligence, strict liability, or any other theory) under any warranty, or under any other legal or equitable theory of whatever type, shall not exceed the purchase price paid by buyer, and under no circumstances shall BL be liable of special, indirect, incidental or consequential damages. The amount of the purchase price of the equipment is determined in part by the fact that buyer has agreed to so limit seller's liability. No action arising out of any transaction under this agreement may be brought by purchaser more than one year after the cause of action has accrued. Some states do not allow an exclusion or limitation of consequential or incidental damages, so the above limitation of liability may not apply to you.

Accessories/Options

More Information

Reviews