BendPak RJ7W Rolling Bridge Jack 7,000-lb. Capacity

In stock
Guaranteed Lowest Price $1,825.00 Regular Price $2,110.00

BendPak RJ7W 7,000-lb. Capacity Rolling Bridge Jack w/Easy-Roll Wheels
This 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.


BendPakLift 7,000 lbs. for Full Wheel Service Capability
The HD-14 car lift is one of our most popular units for lifting medium-duty vehicles, as well as low-stance sports cars. Its extended approach ramps make it easy to safely engage your vehicle’s wheels, but what do you do when it’s time for a tire swap? Unless you want to expand your capabilities with a two-post lift, a simple pair of RJ7W rolling bridge jacks is necessary to lift the vehicle. (Each jack lifts half the vehicle frame.)

Rubber contact pads
BendPak rubber contact pads are included with every rolling bridge jack we sell. The RJ7W 7000 pads engage the lift points of large vehicle chassis with ease. We recommend purchasing the optional frame cradle pads for larger trucks and SUVs, as well.

Stackable adapters
Because different suspension rigs and vehicle bodies sit at different heights above the ground, the RJ7W rubber contact pads come with stackable adapters. This lets you reach the lift points without sacrificing how much rise you get from the jack. The adapters work on every vehicle type; all you need to know is whether the RJ7W is the right jack for what you want to lift.

High-pressure hydraulic power unit
A single, air-hydraulic pump is fitted to the side of the RJ7W rolling bridge jack. Your car lift has its own electric-hydraulic system that runs independent of your jack’s. After connecting the air line to the jack (needs 125 PSI and 10-20 CFM), an easy-to-use foot pedal activates the jack.

Three lock levels
For your convenience, BendPak rolling bridge jacks can be lifted to three different positions. They lock automatically as the jack rises and release together as the jack descends. Your car lift operations are separate from those of the bridge jack.

Features and Specs

  • 7,000-lb. lifting capacity
  • Rubber contact pads
  • Stackable adapters
  • High-pressure hydraulic power unit
  • Optional air-line kit
  • Stackable adapters
  • Lifting Capacity*: 7,000 lbs. (3,175 kg)
  • Rise A - Max. Height + Pad Only: 18.8" (478 mm)
  • Rise B - Max. Height + Pad + Adapter: 21.8" (554 mm)
  • Rise C - Min. Height + Pad Only: 8" (203 mm)
  • Rise D - Min. Height + Pad + Adapter: 11" (279 mm)
  • Time to Full Rise: 45 seconds
  • Reach F - Support Arm Width: 36" (914 mm) - 46" (1,168 mm)
  • Reach G - Max. Arm Reach: 56" (1,422 mm)
  • Reach H - Min. Arm Reach: 42" (1,067 mm)
  • Motor: Air-Hydraulic Pump
  • Noise: 45 dB
  • Shipping Weight: 445
  • Shipping Dimensions: 42" x 24" x 15" / 1,066 mm x 609 mm x 381 mm

Included commercial-grade air-hydraulic pump requires 125 psi and 10 - 20 CFM.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult for a complete list or contact BendPak via

*BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).


More Information

More Information

BendPak RBJ7000 Rolling Bridge Jack Brochure (.pdf)

BendPak RBJ Series Rolling Bridge Jack Manual (.pdf)

BendPak Rolling Bridge Jack Warranty (.pdf)

Note: Price applies for current model rolling jack, to be fitted on current BendPak 4 post lift model. If fitting on different manufacturer's model, or older BendPak model, modifications may be needed, and additional costs will apply. Contact us for details.