Inground Lifts

Atlas FM-9SL Flush Mount Full-Rise Scissor Lift9,000 lbs. Capacity In-Ground Commercial GradeThe Atlas FM-9SL 9,000 lb. flush mounted scissor lift is the perfect choice for those service facilities that need to maximize the number of vehicle lifts per service area square foot. If you like the clean floor look for your service department (no above ground lifts), then the Atlas flush mounted scissor lift offers the perfect alternative. Unlike old school in-ground lifts, the flush mounted lift requires minimal excavation and the electric/hydraulic power unit is easily accessed during periodic maintenance.

Atlas SLP-9K Commercial Grade Full-Rise Scissor Lift 9,000 lb. Capacity The Atlas SLP-9K full rise scissor lift combines an extremely low lift platform height and a 78 inch full rise scissor jack system. This full rise scissor lift is the perfect above ground lift for those customers with ceiling height restrictions and the need for “enough lift” to raise pick-up trucks. 

Challenger Lifts SX14-FLUSH Scissor Alignment Lift Flush Mount 14,000 lbs. Capacity Alignment Ready Scissor Lift The Challenger Lifts SX14 Series Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows more scissor lifts to fit into the same operating space as 4-post lifts. Adjustable turnplate pockets allow for a wider range of wheelbase alignments. The SX14 features include LED lighting, extra wide runways, single point air actuated lock release, single locking point rear slip plates, photo cell to ensure runway synchronization, approach ramp rollers, and drive-on and off runway design. The SX14 is available flush mount, surface mount, and surface mount with extended ramps for low clearance vehicles. The SX14 is ALI and ETL Certified. Alignment Package Includes: (2) 7,000 lbs. Capacity Rolling Jacks, (2) Stainless Steel Turntables, (2) Rear Slip Plates, and Dual Jack Airline Kit.

Challenger Lifts DX77 Full-Rise Double Scissor Lift Flush Mount 7,700 lbs. Capacity Low Profile Adjustable Width The Challenger Lifts DX77 full-rise low profile 7,700 lbs. capacity double scissor lift was engineered with efficiency and productivity in mind. The DX77 can easily lift all makes and models (within rated capacity) with a synchronized hydraulic system. The DX77 also offers free access all around the lifted vehicle and between platforms, with a crossmember free design providing an uncluttered and hazard-free work area. The DX77 is available flush mount, surface mount, and surface mount with extended ramps. The DX77 is ALI and ETL Certified.

BendPak MDS-6EXTF Flush Mount Extended Mid-Rise Scissor Lift 6,000 lbs. Lifting Capacity You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak mid-rise scissor lift. This family of 6,000-lb. capacity car lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions and a free set of truck adapters. Let our family of mid-rise car lifts take your service capabilities to new heights. 

BendPak SP7-XEF Flush Mount Full-Rise Scissor Lift 7,000 lbs. Capacity Frame Engaging The BendPak SP7-XEF Flush Mount Full-Rise Scissor Lift is ideal for shops that are limited in space but have a huge demand for performance. The SP-7XEF has all the lifting height of a two-post lift without the columns that take up precious shop space. Features a 22" x 63" lift platform, hardened pivot pins, dual hydraulic cylinders and ergonomic controls. Let the SP7-XEF take those vehicles, and your bottom line, to new heights. BendPak LR-4A optional arm kit available. 

Challenger Lifts EV1220 Standard Inground Lift 12,000 lbs. CapacityPremium Hydraulic Cassette-Style Inground LiftComplete Package (Includes: Tub, Frame and Lift)The Challenger Lifts EV1220 electric hydraulic cassette-style 12,000 lbs. capacity inground lift brings flexibility to any professional service facility. With a smaller footprint, your shop can maximize service bays. Able to handle full-sized vehicles to heavy-duty trucks and SUVs, the wide range of capabilities provides an ideal solution for fleet maintenance. The EV1220 comes standard with true 3-stage front and rear arms, which have the ability to lift a larger range of heavier vehicles. Models featuring QuickCycle can rise in just 38 seconds. Expand your service potential with our most versatile, easy-to-operate inground lift. The EV1220 is ALI and ETL Certified. As of 2/18/26, the CL10A, CL12A, EV10, EV12, EW10, and EW12 will feature a new pressure compensating flow control valve on each cylinder reducing the lowering speed to approximately 20 seconds regardless of the weight of the vehicle. As of 3/31/26, due to supply chain issues, the CL10A, CL12A, EV10, EV12, EW10, and EW12 can be shipped with either the 30 Amp Hydraulic Solutions power unit or the 20 Amp Bucher power unit. Please note in your order if you require a specific brand power unit. Scroll down for more details. EV1220 Model Selection: EV1220 Base Model (Includes: Tub, Frame and Lift) EV1220-QC with QuickCycle EV1220-BMC with Bench Mounted Controls EV1220-BMC-QC with Bench Mounted Control and QuickCycle All Challenger Inground Lifts are fully contained to eliminate any risk of environmental impact.

Challenger Lifts EV1020 Standard Inground Lift 10,000 lbs. CapacityPremium Hydraulic Cassette-Style Inground Lift Complete Package (Includes: Tub, Frame and Lift)The Challenger Lifts EV1020 electric hydraulic cassette-style 10,000 lbs. capacity inground lift meets the demands of professional service facilities. With a smaller footprint and substantial capabilities, this 3-stage inground lift is ready to maximize service bays in any professional service facility. The EV1020 has 3-stage front and rear arms or optional fixed express drive-on pads. Models featuring QuickCycle can rise in just 25 seconds and lower in only 17 seconds. Expand your service potential with our most versatile, easy-to-operate inground lift. The EV1020 is ALI and ETL Certified. As of 2/18/26, the CL10A, CL12A, EV10, EV12, EW10, and EW12 will feature a new pressure compensating flow control valve on each cylinder reducing the lowering speed to approximately 20 seconds regardless of the weight of the vehicle. As of 3/31/26, due to supply chain issues, the CL10A, CL12A, EV10, EV12, EW10, and EW12 can be shipped with either the 30 Amp Hydraulic Solutions power unit or the 20 Amp Bucher power unit. Please note in your order if you require a specific brand power unit. Scroll down for more details. EV1020 Model Selection: EV1020 Base Model (Includes: Tub, Frame and Lift) EV1020-QC with QuickCycle EV1020-BMC with Bench Mounted Controls EV1020-BMC-QC with Bench Mounted Control and QuickCycle EV1020XP9 with Drive-On Pads EV1020XP9-QC with Drive-On Pads and QuickCycle EV1020XP9-BMC with Drive-On Pads and BMC EV1020XP9-BMC-QC with Drive-On Pads, BMC and QuickCycle All Challenger Inground Lifts are fully contained to eliminate any risk of environmental impact.

Challenger Lifts EW12 Wide Inground Lift 12,000 lbs. Capacity Complete Package (Includes: Tub, Frame and Lift)The Challenger Lifts EW12 12,000 lbs. electric hydraulic inground lift provides an extra-wide drive-through clearance for servicing standard, electric, wide-bodied, and exotics with no bolster to drive over. Its design allows for battery-lowering out of electric vehicles and comes standard with True 3-Stage front and rear arms and double-telescoping screw pads. Bench-mounted controls are optional. The EW12 is ALI and ETL Certified. The EW12 can handle some of the widest cars currently on the market, such as the RAM TRX, Hummer EV, Tesla Model X & Ford Mach-E. As of 2/18/26, the CL10A, CL12A, EV10, EV12, EW10, and EW12 will feature a new pressure compensating flow control valve on each cylinder reducing the lowering speed to approximately 20 seconds regardless of the weight of the vehicle. As of 3/31/26, due to supply chain issues, the CL10A, CL12A, EV10, EV12, EW10, and EW12 can be shipped with either the 30 Amp Hydraulic Solutions power unit or the 20 Amp Bucher power unit. Please note in your order if you require a specific brand power unit. Scroll down for more details. EW12 Model Selection: EW12 Base Model (Includes: Tub, Frame and Lift) EW12-BMC with Bench Mounted Controls EW12-QC with QuickCycle EW12-BMC-QC with Bench Mounted Control and QuickCycle All Challenger Inground Lifts are fully contained to eliminate any risk of environmental impact.

Challenger Lifts EW10 Wide Inground Lift 10,000 lbs. CapacityComplete Package (Includes: Tub, Frame and Lift)The Challenger Lifts EW10 10,000 lbs. electric hydraulic inground lift provides an extra-wide drive-through clearance for servicing standard, electric, wide-bodied, and exotics with no bolster to drive over. Its design allows for battery-lowering out of electric vehicles and comes standard with True 3-Stage front and rear arms and double-telescoping screw pads. Bench-mounted controls are optional.The EW10 is ALI and ETL Certified. The EW10 can handle some of the widest cars currently on the market, such as the RAM TRX, Hummer EV, Tesla Model X & Ford Mach-E. As of 2/18/26, the CL10A, CL12A, EV10, EV12, EW10, and EW12 will feature a new pressure compensating flow control valve on each cylinder reducing the lowering speed to approximately 20 seconds regardless of the weight of the vehicle. As of 3/31/26, due to supply chain issues, the CL10A, CL12A, EV10, EV12, EW10, and EW12 can be shipped with either the 30 Amp Hydraulic Solutions power unit or the 20 Amp Bucher power unit. Please note in your order if you require a specific brand power unit. Scroll down for more details. EW10 Model Selection: EW10 Base Model (Includes: Tub, Frame and Lift) EW10-BMC with Bench Mounted Controls EW10-QC with QuickCycle EW10-BMC-QC with Bench Mounted Control and QuickCycle All Challenger Inground Lifts are fully contained to eliminate any risk of environmental impact.