BendPak Scissor Lifts
BendPak scissor lifts provide a space-saving alternative to traditional post lifts by completely eliminating vertical side columns. This open-floor design makes them incredibly popular for detailing bays, tire and brake shops, and residential garages with limited width or lower ceilings. BendPak categorizes their scissor line into three distinct types based on maximum lifting height full-rise, mid-rise, and low-rise.
And remember, we sell, service and can arrange for installation nationwide.
Limited Time Special Deals - Don't Delay!
Regular Price:
Regular Price:
Regular Price:
Regular Price:
Regular Price:
Regular Price:
Regular Price:
Regular Price:
Regular Price:
Regular Price:
Full-Rise Scissor Lifts (Stand-Up Working Height)
These models mimic the lifting height of a two post lift (approx. 70 inches) but sit flat or flush on the floor when fully collapsed.
Best For: Commercial garages or home shops wanting total under-car access to stand up straight without dealing with heavy side posts.
Key Specifications: 7,000 lbs. capacity, 70.5-inch max lifting height, surface-mount profile, and an open-center design for transmission and exhaust work.
Mid-Rise Scissor Lifts (Wheel & Brake Specialist)
Designed to elevate a vehicle between 36 and 48 inches, these are ideal for standard 8-to-10-foot residential garage ceilings.
Best For: Home mechanics wanting heavy-duty lifting without permanently losing garage space or drilling floor anchors.
Key Specifications: 6,000 lbs. capacity, 48-inch max lift height, and runs entirely on standard 110V household power. The power cart acts as a tow handle to roll the lift away when done.
Low-Rise Scissor Lifts (Bodywork & Tire Swaps)
Low-rise options stay lower to the ground (around 24 inches) and are targeted at high-volume tire service and exterior wrap/detailing shops.
Best For: Body shops, paint correction, wheel changes, and paint protection film (PPF) application.
Key Specifications: 6,000 lbs. capacity, 26-inch max rise, features low-friction UHMW rollers for portable positioning. Available via BendPak and Acme Tools.
Operational Considerations
Air Supply for Safety Release: Standard full-rise and mid-rise MDS lines require an air compressor (minimum 30-50 PSI) to safely disengage the pneumatic lock mechanisms when dropping the vehicle. The portable MD-6XP utilizes manual, multi-position mechanical lock bars instead.
Concrete Groundwork: Even portable, non-anchored models require a stable, fully cured concrete slab of at least 4.25 inches thick (3,000 PSI) to handle the immense localized weight distribution under the scissor pivot tracks.
One-Stop for Auto Shop Equipment
Think of us as your one-stop location for whatever garage equipment you need. We carry a huge selection of automotive equipment from the leading names in the industry. Our name brand auto shop equipment will give you an edge when handling almost any auto repair or upgrade project. Find out why more and more auto shop owners and home hobbyists are purchasing their garage equipment from ASEdeals.
Frequently Asked Questions
What's the difference between a pit-style and a surface-mount scissor lift?
A pit-style model recesses into the floor so it sits flush and takes up no vertical space when lowered, which works well in a shared bay where foot and equipment traffic needs to move freely. A surface-mount model sits on top of the floor without recessing, which is simpler to install but leaves a low profile obstruction when the lift is down.
Do I need an air compressor for every BendPak scissor lift?
Not for every model. Standard full-rise and mid-rise MDS lines require an air compressor delivering at least 30-50 PSI to safely release the pneumatic lock mechanism. Portable models like the MD-6XP use manual, multi-position mechanical lock bars instead, so no compressor is needed to operate them.
Can I move a BendPak scissor lift once it's installed?
It depends on the model. Portable units like the LR-60P and MD-6XP are built to be repositioned, with a rolling power cart that doubles as a tow handle. Fixed, surface-mounted or pit-style models are intended for a permanent location and aren't designed to be relocated once installed.
What open-center design actually means for working under a vehicle?
Open-center models eliminate the cross members that would otherwise sit beneath the vehicle, giving unobstructed access to the transmission, exhaust system, and general underbody. This matters most for repair work rather than tire or brake service alone, where full access underneath the vehicle speeds up the job considerably.
Is a BendPak scissor lift as durable as a two post lift for commercial use?
Full-rise models like the SP-7XE are built to match the lifting height and duty cycle of a two post lift, with ALI and ETL certification backing their commercial-grade construction. Lower-capacity portable models are better suited to lighter, occasional use rather than a high-volume shop running the lift dozens of times a day, so match the specific model's duty rating to how often you'll actually cycle it.
