Industrial Gold CI51E61V Reciprocating Compressor 12CFM

In stock
SKU
CI51E61V
Our Price $1,188.00 Regular Price $1,249.00

Industrial Gold CI51E61V Reciprocating Compressor 12CFM
Commercial Duty Stationary 95-125PSI 12CFM 60 Gallon Vertical

High value compressor for light commercial applications, pro-consumer or heavy home hobbyist. These commercial duty units have a high cfm per HP ratio with a maximum 50% duty cycle. Designed to power smaller air tools, low volume nail guns, small grinders and cut off tools.

Description

Industrial Gold

Industrial Gold CI51E61V Reciprocating Compressor 12CFM
Commercial Duty Stationary 95-125PSI 12CFM 60 Gallon Vertical

High value compressor for light commercial applications, pro-consumer or heavy home hobbyist. These commercial duty units have a high cfm per HP ratio with a maximum 50% duty cycle. Designed to power smaller air tools, low volume nail guns, small grinders and cut off tools.


Available in both vertical and horizontal configurations, our stationary units have the following features:

  • No Start-Up Kit Required
  • ASME Powder Coated Steel Tank
  • Auto Start/Stop
  • Disk & Spring Valves
  • Low RPM Pump
  • Solid Cast Iron Pump
  • All UL Electrical Components
  • 60 Gallon Tank
  • 208-230 Volt
  • Stainless Steel Flexible Discharge Line
  • Motor Overload Protection Built-In
  • No Magnetic Starter Required

When you purchase an Industrial Gold air compressor you are getting a precision built compressor from the finest materials using the finest state of the art design and high-tech engineering. Quality, performance and trouble free operation will assure you a dependable supply of air power on demand.

Features and Specs

Standard Features

  • 12 cfm @ 125 psi
  • 14 cfm @ 40 psi
  • 208-230/1/60
  • No Start-Up Kit Required
  • ASME Powder Coated Steel Tank
  • Auto Start/Stop
  • Disk & Spring Valves
  • Low RPM Pump
  • Solid Cast Iron Pump
  • All UL Electrical Components
  • 60 Gallon Tank
  • 208-230 Volt
  • Stainless Steel Flexible Discharge Line
  • Motor Overload Protection Built-In
  • No Magnetic Starter Required
Specifications
  • Horsepower: SPL
  • cfm @ 125 psi: 12
  • cfm @ 40 psi: 14
  • Operating Pressure: 95-125
  • Tank Size: 60 Gallon
  • Vert/Horiz: Vertical
  • Voltage: 220
  • Phase: 1
  • Amps @ 230 Volt: 15
  • Dimensions: 30" L x 25" W x 74" H
  • Warranty: (1) Year Limited Reciprocating Compressor and Parts

Industrial Gold Limited Warranty Reciprocating Compressors and Parts
All component parts on this compressor, installed by the manufacturer, are warranted to be free of defects in workmanship and material for a period of one year. Transportation charges are the responsibility of the purchaser. This warranty extends to the original purchaser of the compressor only. The purchaser must use Synthetic Reciprocating Compressor Oil, Part Number 30100, in the compressor for the duration of the compressor warranty. There are NO express warranties other than those contained in this limited warranty statement. Covered in the one year period of the warranty are defective parts and labor only. Part defects are limited to original parts only. The compressor warranty is void in the case of abuse, lack of proper service, incorrect application, incorrect installation, and neglect. Industrial Electric stationary compressors may be repaired on site as long as the compressor is not located further than 50 miles from the service center. The purchaser is responsible for any additional travel expense beyond 50 miles from the service center. Gas/Diesel Engine Driven, Single Stage Stationary, and Contractor Series compressors must be repaired at the closest service center to the compressor. The purchaser is responsible for any travel expense if they do not wish to bring the compressor to the service center.
ALL "SPECIALTY COMPRESSOR" WARRANTY SERVICE MUST BE PERFORMMED AT THE CLOSEST SERVICE CENTER TO THE COMPRESSOR. A "SPECIALTY COMPRESSOR" is any compressor packaged with options other than those that apply to the standard model in the catalog. Warranty labor for the first year is only covered for work performed Monday-Friday 8am-5pm excluding all major US holidays. BEFORE WARRANTY SERVICE IS PERFORMED, CONTACT THE MANUFACTURER TECH SUPPORT FOR FASTEST SOLUTION AND APPROVAL (800-531-9656). New parts purchased are warrantied to be free from defects for a period of 1 year. Parts warranty is repair or replace only. Parts warranty is limited to the repair or replacement of the defective part only. No labor allowed for parts warranty. The defective part will be repaired or replaced. Freight and labor are not covered under the parts warranty. FOR A DEFECTIVE PART, CONTACT THE WARRANTY SERVICE CENTER (800-531-9656).

Reviews