Scissor Lifts Full-Rise

Atlas 12ASL-N Commercial Grade Scissor Alignment Lift 12,000 lbs. Capacity The Atlas 12ASL-N 12,000 lbs. Commercial Grade Scissor Alignment Lift allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dual rear wheel pickup truck.

Atlas FM-9SL Flush Mount Full-Rise Scissor Lift9,000 lbs. Capacity In-Ground Commercial GradeThe Atlas FM-9SL 9,000 lb. flush mounted scissor lift is the perfect choice for those service facilities that need to maximize the number of vehicle lifts per service area square foot. If you like the clean floor look for your service department (no above ground lifts), then the Atlas flush mounted scissor lift offers the perfect alternative. Unlike old school in-ground lifts, the flush mounted lift requires minimal excavation and the electric/hydraulic power unit is easily accessed during periodic maintenance.

Atlas PX16A Heavy-Duty Scissor Alignment Lift 16,000 lbs. Capacity + RJ8 Air Hydraulic Rolling Jacks 8,000 lbs. Capacity Combo The Atlas PX16A Heavy-Duty Scissor Alignment Lift has a 16,000 lbs. capacity scissor and is the perfect choice for those service shops that need a space saving (narrow width) alignment lift to accommodate most all passenger cars up to heavy-duty long wheel base trucks and vans. The Atlas PX16A allows the operator to perform 4-wheel alignments for vehicles with wheel base lengths from 96 inches to 184 inches. The commercial grade RJ8 air / hydraulic rolling jack can be used to raise the front or rear portion of a vehicle; allowing the operator of a four post above ground lift to perform wheel and brake service.Includes truck adapters.

Atlas 12ASL Scissor Alignment Lift 12,000 lbs. Capacity + RJ-6 Air Hydraulic Rolling Jacks 6,000 lbs. Capacity Combo The Atlas 12ASL-N 12,000 lbs. Commercial Grade Scissor Alignment Lift allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dual rear wheel pickup truck. Includes Alignment Turntables, Turntable Covers, Extra Long Slip Plates, Airline Kit, Rubber Lifting Pads, and Mounting Hardware.The Atlas RJ-6 6,000 lbs. Capacity Air Hydraulic Rolling Jack is the perfect accessory for either the Atlas 12AWFSL or Atlas 12ASL alignment racks. The Atlas RJ-6 air hydraulic rolling jack may also be used on competitive scissor lifts and four post lifts that have welded rails on the inside of the runways. Includes Stack On Truck Adapters.

Atlas 12AWFSL Scissor Alignment Lift 12,000 lbs. Capacity + RJ-6 Air Hydraulic Rolling Jacks 6,000 lbs. Capacity Combo The Atlas 12AWFSL 12,000 lbs. Scissor Alignment Lift has all the same features as the Atlas 12ASL lift but with the addition of built in runway lifts known as the "Wheels Free" lifting system. When a vehicle is loaded on the 12AWFSL lift the "Wheels Free" jacks will raise a vehicle by the frame, lifting it so the wheels come off the runways for easier access and to facilitate alignments. The "Wheels Free" jacks are conveniently controlled at the lifts control console. The Atlas 12AWFSL has a lifting height of over seven feet so that it may be floor mounted or recessed in the floor for flush mounting. The full frame under the scissor lift provides for maximum stability. Includes Alignment Turntables, Turntable Covers, Extra Long Slip Plates, Airline Kit, Rubber Lifting Pads, and Mounting Hardware.The Atlas RJ-6 6,000 lbs. Capacity Air Hydraulic Rolling Jack is the perfect accessory for either the Atlas 12AWFSL or Atlas 12ASL alignment racks. The Atlas RJ-6 air hydraulic rolling jack may also be used on competitive scissor lifts and four post lifts that have welded rails on the inside of the runways. Includes Stack On Truck Adapters.

Autel AULS14ALOR1T ADAS Bay Max 14K Scissor Alignment Lift 14,000 lbs. Capacity Flush Mount with Jack Storage Floor Lift Table The Autel ADAS 14K Scissor Lift is a 14,000 lbs. capacity, flush-mounted specially designed alignment lift with Floor Lift Table that enables all ADAS calibrations to be performed within bay space. This premium hydraulic lift, which is compatible with passenger and light trucks, includes two 7,000 lbs. capacity Jacking Beams, has front and rear opening runways with flip-down wheel stops, stainless steel air lock release for longer life and less maintenance. Double-wide runways with built-in "Z" rails are structurally stronger with no sagging or flexing for far more accurate alignments. Runways measure 203" long and 26" wide. Low angle approach ramps provide for easy access. Stainless Steel Front Radius Turn Plates and Rear Slip Plates with Turn Plate Pocket Protectors for paint protection. Built-in Runway Air Tire Inflation Kit at each wheel. Shatterproof 24-inch LED Lighting Kit with Automatic Shut Off. Enclosed Console Control Power Unit. Krown Industrial-grade Rust Proofing. Premium Double Baked Power Coat Finish. Black Finish Scissor Lift and Base. Autel logo labeled. These lifts are made in North America and ALI Certified.

Autel AULS12ALOR1T ADAS Bay Max 12K Scissor Alignment Lift 12,000 lbs. Capacity Flush Mount with Jack Storage Floor Lift Table The Autel ADAS 12K Scissor Lift is a 12,000 lbs. capacity, flush-mounted specially designed alignment lift with Floor Lift Table that enables all ADAS calibrations to be performed within bay space. This premium hydraulic lift, which is compatible with passenger and light trucks, includes two 6,000 lbs. capacity Jacking Beams, has front and rear opening runways with flip-down wheel stops, stainless steel air lock release for longer life and less maintenance. Double-wide runways with built-in "Z" rails are structurally stronger with no sagging or flexing for far more accurate alignments. Runways measure 185" long and 26" wide. Low angle approach ramps provide for easy access. Stainless Steel Front Radius Turn Plates and Rear Slip Plates with Turn Plate Pocket Protectors for paint protection. Built-in Runway Air Tire Inflation Kit at each wheel. Shatterproof 24-inch LED Lighting Kit with Automatic Shut Off. Enclosed Console Control Power Unit. Krown Industrial-grade Rust Proofing. Premium Double Baked Power Coat Finish. Black Finish Scissor Lift and Base. Autel logo labeled. These lifts are made in North America and ALI Certified.

Autel AULS14ALOR1 14K Scissor Alignment Lift 14,000 lbs. Capacity Flush Mount The Autel Alignment 14K Scissor Lift is a 14,000 lbs. capacity, flush-mounted hydraulic alignment scissor lift compatible with most passenger vehicles and light trucks. This premium lift includes two 7,000 lbs. capacity Jacking Beams, has front and rear opening runways with flip-down wheel stops, stainless steel air lock release for longer life and less maintenance. Double-wide runways with built-in "Z" rails are structurally stronger with no sagging or flexing for far more accurate alignments. Runways measure 203" long and 26" wide. Low angle approach ramps provide for easy access. Stainless Steel Front Radius Turn Plates and Rear Slip Plates with Turn Plate Pocket Protectors for paint protection. Built-in Runway Air Tire Inflation Kit at each wheel. Shatterproof 24-inch LED Lighting Kit with Automatic Shut Off. Enclosed Console Control Power Unit. Krown Industrial-grade Rust Proofing. Premium Double Baked Power Coat Finish. Black Finish Scissor Lift and Base. Autel logo labeled. These lifts are made in North America and ALI Certified.

Autel AULS12ALOR1 12K Scissor Alignment Lift 12,000 lbs. Capacity Flush Mount The Autel Alignment 12K Scissor Lift is a 12,000 lbs. capacity, flush-mounted hydraulic alignment scissor lift compatible with most passenger vehicles and light trucks. This premium lift includes two 6,000 lbs. capacity Jacking Beams, has front and rear opening runways with flip-down wheel stops, stainless steel air lock release for longer life and less maintenance. Double-wide runways with built-in "Z" rails are structurally stronger with no sagging or flexing for far more accurate alignments. Runways measure 185" long and 26" wide. Low angle approach ramps provide for easy access. Stainless Steel Front Radius Turn Plates and Rear Slip Plates with Turn Plate Pocket Protectors for paint protection. Built-in Runway Air Tire Inflation Kit at each wheel. Shatterproof 24-inch LED Lighting Kit with Automatic Shut Off. Enclosed Console Control Power Unit. Krown Industrial-grade Rust Proofing. Premium Double Baked Power Coat Finish. Black Finish Scissor Lift and Base. Autel logo labeled. These lifts are made in North America and ALI Certified.

Atlas PX16A Heavy-Duty Scissor Alignment Lift16, 000 lbs. Capacity with Extra Long Slip Plates and TurntablesThe Atlas PX16A Heavy-Duty Scissor Alignment Lift has a 16,000 lb. capacity scissor. It is the perfect choice for those service shops that need a space-saving (narrow width) alignment lift to accommodate most all passenger cars up to heavy-duty long-wheel base trucks and vans. The Atlas PX16A allows the operator to perform 4-wheel alignments for vehicles with wheelbase lengths from 96 inches to 184 inches.

Atlas 12AWFSL Wheels Free Scissor Alignment Lift12,000 lbs. Capacity Heavy-Duty Super-BalancedThe Atlas 12AWFSL 12,000 lbs. Scissor Alignment Lift has all the same features as the Atlas 12ASL lift but with the addition of built in runway lifts known as the "Wheels Free" lifting system. When a vehicle is loaded on the 12AWFSL lift the "Wheels Free" jacks will raise a vehicle by the frame, lifting it so the wheels come off the runways for easier access and to facilitate alignments. The "Wheels Free" jacks are conveniently controlled at the lifts control console. The Atlas 12AWFSL has a lifting height of over seven feet so that it may be floor mounted or recessed in the floor for flush mounting. The full frame under the scissor lift provides for maximum stability.Includes Alignment Turntables, Turntable Covers, Extra Long Slip Plates, Airline Kit, Rubber Lifting Pads, and Mounting Hardware.

AMGO AX-12A Commercial Grade Scissor Alignment 12,000 lbs. Capacity The AMGO AX-12A Scissor Alignment Lift is a great lift to expand your shops capacity for larger vehicles and greater workload with its rugged design and increased dependability. The hefty 6 ton lifting capacity provides the heavy-duty workload needed for mechanics to increase efficiency and productivity for greater long-run profits. This heavy-duty scissor lift has four cylinders and each dual cylinder is designed work synchronously and to assure the optimal lifting level on both platforms. The AX-12A is made stronger, more versatile, and easier to use and can lift 12,000 lbs.

AMGO AX-12 Commercial Grade Scissor Lift 12,000 lbs. Capacity AMGO's AX-12 has great performance and it is the perfect choice for your commercial service. This heavy-duty scissor lift has four cylinders and each dual cylinder is designed work synchronously and to assure the optimal lifting level on both platforms. The AX-12 is made stronger, more versatile, and easier to use and can lift 12,000lbs.

AMGO XL-7 Full-Rise Low Profile Scissor LiftIf you have a growing workload but limited space, then the AMGO XL-7 Scissor Lift is the perfect choice for you. AMGO's Full Rise XL-7 Scissor Lift works great for raising vehicles high enough to walk underneath and has a low profile design of only 4-1/2 inches, maximizing limited bay space. The XL-7 is made more robust, versatile, easier to use, and can lift 7,000lbs.

Atlas SLP-9K Commercial Grade Full-Rise Scissor Lift 9,000 lb. Capacity The Atlas SLP-9K full rise scissor lift combines an extremely low lift platform height and a 78 inch full rise scissor jack system. This full rise scissor lift is the perfect above ground lift for those customers with ceiling height restrictions and the need for “enough lift” to raise pick-up trucks. 

Challenger Lifts SX14-FLUSH Scissor Alignment Lift Flush Mount 14,000 lbs. Capacity Alignment Ready Scissor Lift The Challenger Lifts SX14 Series Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows more scissor lifts to fit into the same operating space as 4-post lifts. Adjustable turnplate pockets allow for a wider range of wheelbase alignments. The SX14 features include LED lighting, extra wide runways, single point air actuated lock release, single locking point rear slip plates, photo cell to ensure runway synchronization, approach ramp rollers, and drive-on and off runway design. The SX14 is available flush mount, surface mount, and surface mount with extended ramps for low clearance vehicles. The SX14 is ALI and ETL Certified. Alignment Package Includes: (2) 7,000 lbs. Capacity Rolling Jacks, (2) Stainless Steel Turntables, (2) Rear Slip Plates, and Dual Jack Airline Kit.

Challenger Lifts SX14-ER Scissor Alignment Lift Surface Mount 14,000 lbs. Capacity with Extended Length Ramps The Challenger Lifts SX14 Series Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows more scissor lifts to fit into the same operating space as 4-post lifts. Adjustable turnplate pockets allow for a wider range of wheelbase alignments. The SX14 features include LED lighting, extra wide runways, single point air actuated lock release, single locking point rear slip plates, photo cell to ensure runway synchronization, approach ramp rollers, and drive-on and off runway design. The SX14 is available flush mount, surface mount, and surface mount with extended ramps for low clearance vehicles. The SX14 is ALI and ETL Certified. Alignment Package Includes: (2) 7,000 lbs. Capacity Rolling Jacks, (2) Stainless Steel Turntables, (2) Rear Slip Plates, and Dual Jack Airline Kit.

Challenger Lifts SX14-FLUSH Scissor Alignment Lift Flush Mount 14,000 lbs. Capacity Alignment Ready Scissor Lift The Challenger Lifts SX14 Series Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows more scissor lifts to fit into the same operating space as 4-post lifts. Adjustable turnplate pockets allow for a wider range of wheelbase alignments. The SX14 features include LED lighting, extra wide runways, single point air actuated lock release, single locking point rear slip plates, photo cell to ensure runway synchronization, approach ramp rollers, and drive-on and off runway design. The SX14 is available flush mount, surface mount, and surface mount with extended ramps for low clearance vehicles. The SX14 is ALI and ETL Certified. Alignment Package Includes: (2) 7,000 lbs. Capacity Rolling Jacks, (2) Stainless Steel Turntables, (2) Rear Slip Plates, and Dual Jack Airline Kit. CURRENT LEAD TIME 4-6 WEEKS

Challenger Lifts DX77 Full-Rise Double Scissor Lift Flush Mount 7,700 lbs. Capacity Low Profile Adjustable Width The Challenger Lifts DX77 full-rise low profile 7,700 lbs. capacity double scissor lift was engineered with efficiency and productivity in mind. The DX77 can easily lift all makes and models (within rated capacity) with a synchronized hydraulic system. The DX77 also offers free access all around the lifted vehicle and between platforms, with a crossmember free design providing an uncluttered and hazard-free work area. The DX77 is available flush mount, surface mount, and surface mount with extended ramps. The DX77 is ALI and ETL Certified.

Challenger Lifts DX77 Full-Rise Double Scissor Lift Flush Mount 7,700 lbs. Capacity Low Profile Adjustable Width The Challenger Lifts DX77 full-rise low profile 7,700 lbs. capacity double scissor lift was engineered with efficiency and productivity in mind. The DX77 can easily lift all makes and models (within rated capacity) with a synchronized hydraulic system. The DX77 also offers free access all around the lifted vehicle and between platforms, with a crossmember free design providing an uncluttered and hazard-free work area. The DX77 is availble flush mount, surface mount, and surface mount with extended ramps. The DX77 is ALI and ETL Certified. CURRENT LEAD TIME 4-6 WEEKS

Forward Lift FS77 Full-Rise Scissor Lift 7,700 lbs. Capacity Forward Lift's FS77 packed with advanced efficiency features that make it a reliable lift for smaller service bays and quick-service tasks. Third-party tested and certified by the Automotive Lift Institute (ALI) to meet industry safety and performance standards, The FS77 is ALI and ETL Certified.

BendPak SP7-XEF Flush Mount Full-Rise Scissor Lift 7,000 lbs. Capacity Frame Engaging The BendPak SP7-XEF Flush Mount Full-Rise Scissor Lift is ideal for shops that are limited in space but have a huge demand for performance. The SP-7XEF has all the lifting height of a two-post lift without the columns that take up precious shop space. Features a 22" x 63" lift platform, hardened pivot pins, dual hydraulic cylinders and ergonomic controls. Let the SP7-XEF take those vehicles, and your bottom line, to new heights. BendPak LR-4A optional arm kit available. 

BendPak SP-7XE Full-Rise Scissor Lift 7,000 lbs. Capacity Frame-Engaging Surface Mount The BendPak SP-7XE is a space‐saving, frame engaging lift featuring no cross members whatsoever, making installation simpler than ever. It easily accommodates most passenger vehicles and light trucks, and it comes complete with pneumatic safety locks, rubber lifting blocks and an open‐center for full under‐car accessibility. The SP-7XE is a brilliant design for full-service auto shops, quick-lube pits and anyone who regularly services vehicles without much room to spare. If you need more overhead space for you and your techs, the full-rise SP-7XL might be the perfect scissor lift for you. A flush-mount option, the SP-7XLF, is also available. 

Bendpak XR-12000L Quatra™ Pantograph Scissor Lift/Standard Runways The Quatra™ specialty lift offers 12,000 lbs. of vertical lifting power. This amazing design permits easy, unobstructed access from the front, back and sides. Its post-free structure utilizes quad-opposing scissor car lift design. There's virtually zero radial shift, so it fits well crowded spaces.

CEMB MOVE Compact Wheel Balancer The Wheel Balancer That Goes Where You Go The CEMB MOVE Compact Wheel Balancer is a fully-automatic wheel balancer designed for mobile service, but also perfect for workshops with limited space thanks to its compact size. Its versatility means you can use MOVE anywhere, with the same performance as high-end models. Features include 2-Hit Data Input With laser, Rotating Interface, Virtual Sonar, One Plane Balancing, AutoAdaptive Mode, Electromagnetic Brake, Automatic Approach, Professional Software, ALU-S 3D Balancing Mode, Adhesive Weight Placement With Laser Spotter, and LED Work Light. MOVE Includes Base For Vehicle or Shop Installation MOVE Can Be Removed From Base And Mounted To Workbench