Atlas 12ASL Commercial Alignment Scissor Lift

In stock
SKU
ATTD-12ASL-N
Guaranteed Lowest Price $11,099.99 Regular Price $12,285.00
INCLUDES FREE SHIPPING*

Atlas 12ASL Commercial Alignment Scissor Lift
The Atlas 12ASL 12,000 lbs. Commercial Grade Alignment Scissor Lift allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dual rear wheel pickup truck.

Description

Atlas EquipmentThe Atlas 12ASL 12,000 lbs. Commercial Grade Alignment Scissor Lift allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dual rear wheel pickup truck.

The Atlas 12ASL 12,000 lbs. Commercial Grade Alignment Scissor Lift has been in production for several years and hundreds of these lifts have been sold throughout the world except for North America.

Our Asian partner developed this lift in a joint venture with one of the most prestigious Italian lift manufacturers. The combination of the Italian engineering and design coupled with the low cost of the Asian labor has resulted in an alignment lift that is equal to or better than similar big name lift brands costing two and three times as much money.

The Atlas alignment lift has a lifting height of over seven feet so that it may be floor mounted or recessed if the customer decides on a flush mount installation. The full frame under the scissor lift provides for maximum stability.

All Atlas alignment scissor lifts can be surface mounted or flush mounted. Each lift comes with approach ramps for the floor mounted application or an optional set of ramps if the customer decides to flush mount the lift. The extra high lifting height allows this alignment scissor lift to be flush mounted and still offer plenty of room under the runways to properly access the underside of the vehicle.

The extra long 71" long approach ramps make it easy to load low riding vehicles.

Once a vehicle is positioned on the Atlas alignment scissor lift, the optional Atlas RJ-6 rolling jack can lift the vehicle off of the runways to perform wheel service. The air powered hydraulic Atlas RJ-6 rolling jack has telescoping arms that extend over the runways to access lift points. These jacks have screw out extensions or optional stack on truck adapters.

Welded rails on the inside of the runways are standard on all lifts, allowing the customer the option of incorporating the Atlas RJ-6 rolling jack system on his Atlas alignment scissor lift.

Quality workmanship, ease of operation, straight forward installation instructions, a durable powder coat finish and the lowest prices in the Industry makes the Atlas 12ASL 12,000 alignment scissor lift the perfect choice for the demanding and discriminating shop owner.

Limited Bay Space? No Problem!
We often hear from customers who change and balance tires, that they do not have the space to offer alignment services to their customers. They either sub-contract their alignment work or recommend that the customer take their vehicle to a competitor for an alignment. Both options can easily result in the loss of that customer to a competitor.

An Atlas Alignment System allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dual rear wheel pickup truck.

The space saving 12,000 lb. alignment scissor lift is only slightly wider than a vehicle. There is no need for a permanent mounted camera/target alignment machine in the front of the rack. Bay length can be as short as 25 feet and the Atlas alignment system will deliver accuracy equal to or better than our competitors' camera/target 3-D systems. The computer alignment machine can be located anywhere in the bay. (Front, rear, or on either side.)

There is no need to roll a vehicle back and forth to obtain lateral run-out compensations. In fact, when you use the 3-point Fast Clamps, there is no need to either raise the vehicle or roll the vehicle. Since no lateral run-out compensation is needed, accurate alignment measurements can be obtained in about two (2) minutes.

Shops with limited bay space should not be excluded from offering alignment services. Shops can offer profitable alignment services without adding additional bays or expanding existing bay space. Atlas Alignment Equipment costs about 50% less than equivalent alignment equipment.

If you have been putting off buying alignment equipment due to limited floor space or a limited budget, please call us to discuss how your shop can be more profitable (and retain customers) by offering wheel alignment service.

Air Actuated Locks
This alignment scissor lift has multiple automatic locking positions to ensure that the lift can be safely used at different heights. The air actuated lock system engages automatically as the lift moves up and is deactivated from the control panel when the lift is ready to be lowered.

Air Line Kit Included
All Atlas scissor alignment lifts come with a Factory Installed air line kit at no extra charge ($400 value). This air line kit allows the customer to attach a (included) recoil air hose to both rolling jacks without the need of an exposed air hose across the work area floor. The air supply is plumbed into the control panel and the high pressure hose is routed to the inside rear of one platform and the inside front of the other runway. The unique air couplers can be adjusted to regulate the flow of air and can also be turned off without affecting the air supply to the other coupler. The air line kit is hidden and protected so that there is no chance to trip over and air hose. The work area around the lift and between the runways is uncluttered. Another great Atlas above ground lift feature that offers maximum benefits at no cost to the customer.

Recessed Turntables and Turntable Covers
This alignment lift includes a set of front turntables. The turntables may be moved into three different positions, allowing the customer to perform both two wheels and four wheels alignment on the shortest and longest of vehicles. This lift also includes metal turntable cover plates (that cover the cut-outs for the turntables) so that the vehicle is not sitting on the turntable if the lift is not being used for alignment.

Extra Long Slip Plates
Built-in extra long slip plates allow for aligning of wheelbases from 172" to 86".

Features and Specs

Features

  • Heavy Duty Construction and super- balanced lift for wheel alignment
  • Can be surfaced mounted or flush mounted
  • Very precise platform leveling accuracy
  • Mechanical safety lock with Air Operated engagement and release
  • Emergency manual pump for lowering
  • Overload valve included
  • Air Line Kit Included
  • Lowering speed control valve included
  • Recessed Turntables and Turntable Covers
  • Extra Long Slip Plates
  • Turntable Color May Vary
  • Mounting Hardware Included
  • CE Tested and Approved
  • Optional Rolling Jacks Available
  • Optional Cross Support Bars Available

Specifications

  • Capacity: 12,000 lbs
  • Lifting Height: 84-1/4" (7' 1/4")
  • Overall Width: 86-3/8" (7' 2-3/8")
  • Overall Length with Approach Ramps: 268" (22' 4")
  • Overall Length without Approach Ramps: 197" (16' 5")
  • Approach Ramp Length: 71" (5' 10")
  • 4-Wheel Alignment Wheelbase Max: 168 "
  • 4-Wheel Alignment Wheelbase Min: 90"
  • 2-Wheel Alignment Wheelbase Max: 172"
  • 2-Wheel Alignment Wheelbase Min: 86"
  • Runway Width: 23-3/4" (1' 11-3/4")
  • Lowered Height: 11-1/2"
  • Locking Positions: 19
  • Width Between Runways: 39"
  • Motor: 220 volt +/- 5% (209-231volts) single (1) phase
  • Electrical Requirement: 30 Amp Breaker is Required
  • Oil Requirement: 3.5 Gallons AW32/AW46
  • Shipping Weight: 5000 lbs.
  • Shipping Dimensions: 198" x 53" x 29-1/2" (2 Boxes)

Atlas 2/2 Warranty2-Year Structural, 2-Year Hydraulic Limited Warranty
This Atlas product is warranted for two (2) years on structural components, two (2) years on hydraulics, and one (1) year on electric or air / hydraulic power units from invoice date. Wear items carry a 90-day warranty. Structural components are considered the Carriage, Columns, Yokes, Arms, Runways, Plungers, etc. Hydraulic components are cylinders, hoses, and fittings. Cables, sheaves, latches and controls are considered wear items.

The Manufacturer shall repair or replace at their option for this period those parts returned to the factory freight prepaid, which prove after inspection to be defective. This warranty will not apply unless the product is installed, used and maintained in accordance with the Manufacturers installation, operation and maintenance instructions.

Our LIMITED warranty policy does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas equipment. We assume that the buyer of our automotive equipment is mechanically inclined or has employees that are mechanically inclined to perform essential repair services and or maintenance. We also have a list of service technicians that can come to your facility/house at the customer's expense.

NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO BE VALID.

CE Tested and Approved CE Tested And Approved
The letters 'CE' appear on many products that are traded in the European Economic Area (EEA). There are 27 member states of the EU and European Free Trade Association. The CE marking attests the verification by a manufacturer that products meet EU safety requirements. It is the manufacturer’s responsibility to carry out the conformity assessment. Conformity assessment testing was performed by CCQS UK Ltd. www.ccqs.co.uk

This Atlas lift (structure and hydraulics) has been tested and has passed the CE conformity requirements. Atlas lifts sold in the USA and Canada use a different power unit than those required by CE. CE requires an electrical control box (with solenoids) that actuates the hydraulic power unit.

Electric power units supplied with above ground lifts in the USA and Canada do not require the electronic control box; therefore the power unit was not tested to CE approval requirements. If you have questions relating to the power unit supplied with your lift, please discuss these with your salesman.

If you are customer from the EU or other foreign county that requires CE approval, please contact our sales office to see how we can help.

Accessories/Options

More Information

Reviews