Atlas RJ-6 Air Hydraulic Rolling Jack 6,000 lbs. Capacity
Atlas RJ-6 Air Hydraulic Rolling Jack 6,000 lbs. Capacity
with Stack On Truck Adapters
The Atlas RJ-6 rolling jack is the perfect accessory for either the Atlas 12AWFSL or Atlas 12ASL alignment racks. The Atlas RJ-6 (6,000 lbs. capacity) air/hydraulic rolling jack may also be used on competitive scissor lifts and four post lifts that have welded rails on the inside of the runways.
CALL US NOW FOR AN EVEN BETTER DEAL!
Description
Atlas RJ-6 Air Hydraulic Rolling Jack 6,000 lbs. Capacity
with Stack On Truck Adapters
The Atlas RJ-6 rolling jack is the perfect accessory for either the Atlas 12AWFSL or Atlas 12ASL alignment racks. The Atlas RJ-6 (6,000 lbs. capacity) air/hydraulic rolling jack may also be used on competitive scissor lifts and four post lifts that have welded rails on the inside of the runways. The "wheels free" system that is built into many of the Atlas scissor lifts is designed to reach and lift most vehicles. Some customers like to use the rolling jacks to lift either the front or the rear of the vehicle at one time.
Whether you are fan of the Atlas "wheels free" system or enjoy the versatility offered by the rolling jacks, ASEDeals has the solution for you. Many customers buy the alignment racks with the "wheels free" option and also buy one or two of the Atlas RJ-6 rolling jacks so they are prepared for any vehicle that needs wheel service.
Operating Air Pressure (70-105 PSI)
Important: The Atlas RJ-6 is designed and engineered to operate on "delivered" air pressure of between 70-105 PSI. If you exceed 105 PSI, then the rolling jack may be capable of lifting more than its rated capacity… HOWEVER, the metal structure and component parts of the Atlas rolling jack are rated to lift ONLY its rated capacity, so structural damage may result from exceeding that capacity.
Features and Specs
Features
- Air/Hydraulic
- Heavy Duty / Commercial Grade
- Atlas Powder Coated Finish
- Scissor Mechanism Allows for Level Lifting
- Compact Size with a Low Profile
- Safety Lock Positions
- Smooth Rolling Action
- Includes Stack on Truck Adapters
- Adapter Storage
Specifications
- Capacity: 6,000 lbs.
- Maximum Width: 64-1/2"
- Maximum Working Width: 31-1/2" - 49-1/2"
- Minimum Width: 30-1/2"
- Distance Between Runway Capability: 32"-48"
- First Locking Position: 7-1/4"
- Second Locking Position: 15"
- Minimum Pad Height: 3-1/2"
- Maximum Lifting Height: 17-5/8"
- Maximum Capacity: 6,000 lbs.
- Recommended Operating Pressure: 70-105 PSI
- Shipping Weight: 350 lbs.
- Shipping Dimensions: 36" x 19" x 17"
- Warranty: 1 Year Parts
1 Year Parts Warranty
Atlas tire changers, Atlas wheel balancers, Atlas air compressors, Atlas winches, 4 post lift jacks, Atlas brake lathes have a 1-Year Parts Warranty from the date of invoice.
NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO BE VALID.
The Manufacturer shall repair or replace at their option for this period those parts returned to the factory freight prepaid, which prove after inspection to be defective. This warranty will not apply unless the product is installed, used and maintained in accordance with the Manufacturers installation, operation and maintenance instructions.
This warranty applies to the ORIGINAL purchaser only, and is non-transferable. The warranty covers the products to be free of defects in material and workmanship but, does not cover normal maintenance or adjustments, damage or malfunction caused by: improper handling, installation, abuse, misuse, negligence, carelessness of operation or normal wear and tear. In addition, this warranty does not cover equipment when repairs or alterations have been made or attempted to the Manufacturer's products.
More Information
| more |
|---|